Why is my dip top coat not smooth?

It's super important to remember that your Seal & Protect will activate your dip powder, but it will also activate your top coat and make it shiny! If there is too much Seal & Protect on the nail surface, the Top Coat can activate too fast and cause it to have a cloudy or matte finish.

Why is my dip top coat bumpy?

Take note that ridges, waves, or bumps issues usually happen when you're a little too generous when applying the Activator. When this occurs, be sure to allow more time for the Activator to dry before applying the Sealer.

Why isnt my dip top coat smooth?

This can be caused by cross contamination. If you haven't wiped down the nails fully of any surface dust or excess product prior to applying the Gelish Dip Top coat and then any of these excess particles get trapped in the brush and put back into the product, the Gelish Dip Top coat is then spoiled!

Why is my gel polish top coat dull?

Gel topcoat is not properly cured

Things that cause gel topcoat to be dull can be: Curing time is too short: gel topcoat needs adequate time under a UV lamp to be completely cured. If curing time is cut short, the uncured topcoat will be tacky, dull-looking and will be wiped off from the nails with cleanser.

Why is my dip powder uneven?

- Dipping powder is a mix of pigments, and like most mixtures, it can settle, causing the color to become uneven or inconsistent. Simply shake the closed jar well before dipping to ensure that the powder is evenly mixed.

Nail Dipping Powder Troubleshooting - Prevent Dull Top Coat

Can you put clear top coat over dip nails?

Yes, you can technically paint over dip nails, as the dip powder will be sealed with a final top coat before you leave the salon.

How many top coats dip powder?

Each layer of Base Coat and Dipping Powder thickens you finished nail and results in deeper color. We recommend starting with three coats for your first manicure, then adjusting up or down to suit your taste.

How long does it take for Nailboo top coat to dry?

You'll need to apply a base and two layers of color, activate, file, and top it off. Wait for that top coat to dry (two minutes max) and you're good to go!

Why is my gel top coat sticky?

The sticky residue occurs in the upper layer due to exposure to oxygen. Oxygen does not let the upper layer cure properly. Since we have a high percentage of oxygen in the air, so we can't avoid oxygen exposure to the upper layer. But once you apply another coat, the previous coat will get properly cured.

Should I buff my nails before dip powder?

Before you start dipping, you'll have to lightly buff your nails to make the powder attach better. But don't overdo it because it will weaken your nails. When applying the base coat, tilting the brush will make the product build unevenly.

How do you make Dip top coat dry faster?

Why is my gel polish not smooth?

File grit Don't forget that gel needs a dry, rough surface on which to stick. A coarse-grit file is needed with most gel polished, in order for the gel to properly adhere to your nail surface. If the surface is not entirely buffed, the gel will not lie smooth and when cured, it could cause your nails to appear dull.

What does the Activator do for dip nails?

Activator: Activator is the third step in our dipping system. It reacts to Base and cures all layers of powder without the use of a UV/LED lamp. As Activator chemically bonds to Base and dipping powder, each layer hardens and delivers easy workability for buffing.

Why are my gel nails bumpy?

Nail polish can form bubbles when it is too old, too thick, or of poor quality. Another common mistake is to apply polish in excessively thick layers and not waiting long enough before applying another coat. Oil and moisture are common culprits.

What happens if you over cured gel nails?

Over-curing a gel is possible. Some gels will discolor when over-cured and some will lose the gloss, while others will do both or neither. So much of this depends on the gel and the curing light. Each manufacturer should be able to assist the nail technician in what issues they may see with over-curing the product.

How do you remove tacky layer from gel nails?

Use a Non-Acetone Nail Polish Remover

If you don't have isopropyl alcohol or a gel cleanser, a non acetone remover can really help. Also, a non acetone polish remover is not only handy to remove sticky residue, the word on the curb is that it is also healthier for your natural nails.

Can you brush on dip powder?

Be sure to dip the nail into the powder a 45-degree angle and then brush off the excess powder with our Dip Powder Dust Brush. Using a soft, fluffy brush to remove the excess powder after every dip will help you to apply these thin and even layers to build up your flawless nail look!