What temperature is it not good to stain a deck?

Avoid the Heat

If it's too hot, the stain may dry too quickly, potentially causing lap marks and uneven penetration. Avoid staining your deck if it's above 90 degrees Fahrenheit.

What happens if you stain wood below 50 degrees?

Temperature and humidity can have major effects on how your stain dries. If it's too wet or cold, the drying time for stains can easily double. In extreme cases, the product will just stay wet until the humidity decreases or the temperature rises.

Can you stain a deck at 50 degrees?

Most stains can be applied from about 50° F to 90° F — but many people don't realize this range refers to the temperature of the wood surface, not the air. A day that's 70°F and sunny can push deck surface temperatures above 90°F leading to application challenges and shortened open times.

When should you not stain a deck?

You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.

How late in the year can you stain a deck?

Deck stains should be applied between temperatures above 50 and below 90 degrees Fahrenheit. These last weeks of September, as well as the upcoming weeks of early October, are ideal for completing this maintenance step for your deck. With this, it is also best to apply your deck stain away from direct sunlight.

Ideal Conditions to Stain Your Deck

Can I stain my deck in November?

Fall is the perfect time to take on the task of staining your deck. Not only will you not roast in the sweltering summer temperatures, but the cooler fall weather is ideal for staining. Most deck stains recommend that they be used when outdoor temperatures are above 50 and below 90.

What month is best to stain a deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry.

Can I stain my deck in 40 degree weather?

Avoid the Cold

If you're staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren't in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.

Is it better to stain a deck in the morning or evening?

Don't apply your deck stain in the direct sun; choose morning or evening hours, or a time of day when your deck has shade. Morning application can be a safer choice to help avoid any contact with dew that sets in overnight. Don't apply more stain than the wood can absorb.

What is the best time of day to stain a deck?

Applying a deck stain in direct sun will cause the stain to dry to quickly and can result in premature stain failure. In the summer, stain your deck in the morning or evening so the deck surface isn't too hot. Remember, the surface temperature of the deck can be much hotter than the air temperature.

Is it too late to stain my deck?

Is It Too Late to Restore Your Deck? If it's been much longer than the recommended three years since you last stained your deck, you might wonder if it's even worth getting back on track. Fortunately, unless your deck is in a total state of disrepair, it's virtually never too late to provide it with a fresh coating.

Is 24 hours enough time for deck stain to dry?

It's safe for a water-based deck stain to be exposed to rain as long as it has fully dried, which can take one to 24 hours. However, it must cure for up to 72 hours before you can walk on it or place any furniture on it.

Why can't you stain a deck right away?

This process can take many months depending on your deck's sun exposure and the weather patterns after construction is complete. Without waiting for the wood to dry, stain and sealant would not penetrate the wood properly, diminishing its ability to protect the wood from weather damage.

What is too cold wood stain?

“Staining wood usually works between 50 and 90 degrees Fahrenheit,” says Phillip Ash, the founder of Pro Paint Corner, “but the best temperature would be at around 70 degrees Fahrenheit.” Some brands or types of stains may work outside that range, but it's the generally accepted best temperature for staining wood.

What weather is best to stain a deck?

Apply stain to dry wood when it hasn't rained for several days and the forecast calls for at least two days of dry weather between 50° F and 90° F. Low to average humidity promotes faster drying. Staining in direct sunlight can also be a problem. The stain will dry too fast before the wood is able to absorb it.

What if it rains after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

What if it rains 3 hours after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

Is it better to brush or roll stain on a deck?

The first and most obvious reason to roll on deck stain as opposed to brushing it on is that the former allows you to cover a much larger surface area in less time. Rollers are wider, more efficient, and easier to operate. Additionally, using a roller helps you achieve a smoother finish.

Should I put one or two coats of stain on my deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

How long should you let your deck stain without rain?

First, ensure the deck is completely dry. Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

Can you use 30 seconds on stained deck?

In short, the answer is YES. But here's how you can make sure to get the best results: Just like any material to be cleaned with 30 SECONDS, start with a dry surface so the product doesn't just bead off and wash away. Then you want to make sure you thoroughly saturate the deck (which is surprisingly porous!)

How long should you not walk on a deck after staining?

In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I'd recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

How many gallons of stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How long after pressure washing can I stain my deck?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

Can I stain my deck in one day?

Most can be stained in one weekend, plus a few days of dry time. Plan to stain your deck when the weather is dry, and the temperature is between 50 and 90°F. The stain needs time to be absorbed into the wood before it dries thoroughly, so avoid staining your deck in direct sunlight.