What size bolt cutters will cut a Master Lock?

Q. What size of bolt cutters should you use to cut a padlock? A set of 24-inch bolt cutters can cut metal up to 7/16-inch in diameter, which will cut the bolts on most standard padlocks. For higher-quality padlocks that use a harder metal, use a 36-inch bolt cutter.

Can a bolt cutter break a Master Lock?

Try bolt cutters.

This will not work on most master locks, as they are made of case hardened steel.

What will cut a Master Lock?

Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.

Can bolt cutters cut any lock?

Bolt cutters are the common tool of choice for to cut padlocks during forcible-entry. Unfortunately, most padlocks are made of case-hardened steel, which is very strong in comparison to the materials that bolt cutters were intended to cut.

Can bolt cutters cut through hardened steel?

The larger diameters of these chains, especially the 5/8-, ¾-, and 7/8-inch sizes, are extremely difficult to cut due to their girth and hardness. (Note I say difficult, not impossible; there are industrial bolt cutters that have jaw sizes as large as ¾ inch and are designed to cut hardened steel.)

Cutting a Lock with Bolt Cutters

Can a hacksaw cut through a padlock?

If you misplace your key or forget the combination to a lock, you may need to cut through the lock to get it back. Most steel locks can be opened by either using bolt cutters, an angle grinder, or a hacksaw.

How do you break a Master Lock with a screwdriver?

Jiggle the screwdriver while thrusting it in and out of the lock. Slide the blade of the screwdriver back and forth slowly. At the same time, work the handle of the around at different angles to engage as many pins as possible.

How thick can bolt cutters cut?

The longer the arms, the more leverage created and therefore, more cutting power. An 18-inch bolt cutter can cut metal up to 9/32 of an inch in diameter while a 24-inch bolt cutter can cut thicknesses up to 5/16 of an inch, depending on the material's hardness.

What can bolt cutters not cut?

Steel alloys tend to give the strongest protection against bolt cutters. Boron alloy is one example of a material that's difficult to cut through. Hardened steel is also used in many locks and can make the lock more resistant to bolt cutters.

What is the most difficult metal to cut?

Researchers claim the material, known as Proteus, cannot be cut. In fact, it's so tough it destroys any tool that attempts to slice into it. Natural materials like diamond and sapphire are strong because of the dense lattice of atomic bonds, but they're inflexible.

Are there any locks that Cannot be cut?

If you are serious about investing in a padlock that cannot be cut by bolt cutters, the ABUS Granit Plus is going to be your best bet. Called one of the world's most secure padlocks, the tensile resistance is upwards of six tonnes and it is crafted from hardened steel.

What is the easiest way to pick a Master Lock?

The easiest way to pick a Master Lock is by raking it. This is done by first tensioning the core and using a lock pick to bump all of the pins to the shear line. Master Locks can also be picked with a variety of makeshift tools including paperclips, bobby pins, soda cans, and even chicken bones.

What do you do when your Master Lock won't open?

Can you cut a circle lock with bolt cutters?

Disc locks cannot be removed with bolt cutters because the hasp (or the U-shaped part of a padlock) cannot be reached. A disc lock cannot be broken apart with a hammer, either, as a padlock or keyless lock could be.

Can I cut my own lock off my storage unit?

No, you can't cut a lock off of a storage unit. It's against our policies and, frankly, could cost you a lot more than just the cost of a new lock. (Especially if you accidentally damage the storage unit's door.)