What size air conditioner do I need for a 1300 sq ft house?
The 1,300-Square-Foot Answer
When looking for the quick answer to how much air-conditioning power you'll need to adequately cool a 1,300-square-foot space, the answer is 23,000 BTUs per hour of air conditioning power. This is the base capacity needed for a 1,200- to 1,400-square-foot house.
What size AC do I need for 1200 sq ft?
What Size AC Unit Do I Require For 1200 Square Feet? In general, a unit that's 1.75 to 2 Ton or 21,000 to 24,000 BTU should be adequate for a room that's 1200 square feet.How many square feet can a 2.5 ton AC cool?
For example, a 30,000 BTU, 2.5-ton air conditioner is made to effectively cool a home between 1,200 and 1,500 square feet. A slightly larger 3,600, 3-ton unit, is designed for homes that are 1,500 to 1,800 square feet.How many square feet does a 2 ton AC unit cover?
For those of you that don't understand the way AC systems work, a 2-ton unit typically provides cooling for about 900-1,400 square feet of space – give or take.How much is a 2.5 ton AC?
A 2.5-ton AC unit cost is going to be about $3,300 to $3,700 installed. A 3-ton AC unit cost runs homeowner around $3,400 to $3,700. When it comes to a 3.5-ton AC unit cost, you will pay around $3,500 to $3,700. A 4-ton AC unit cost is $3,700 to $3,800 on average.WHAT AIR CONDITIONER SIZE DO I NEED? How To Size Air Conditioner For Your House
What size central air conditioner do I need for a 1500 sq ft home?
1,201 to 1,500 square feet homes should use 2.5 tons. If your home size is higher than the number above but is less not more than 1,800 square feet, you can go for a three-ton A/C. Choose a unit that is 3.5 tons if your home measures more than 1,800 but not more than 2,100 square feet.How many sq ft does a 3 ton AC cover?
How many square feet does a 3-ton air conditioner cover is quite easy to answer as well. 3-ton is equal to 36,000 BTU. If you apply the 20 BTU per sq ft rule of thumb, you can see that a 3-ton air conditioner cools about 1,800 square feet spaces.How do I know if my air conditioner is too big?
4 Signs Your AC System Is Too Big for Your Home
- High Humidity. Oversized units don't run long enough to dehumidify indoor air. ...
- Short Cycling. Because it's so large, an oversized AC meets your home's cooling load in ten minutes or less and then cycles off. ...
- Hot and Cold Spots. ...
- Shorter Lifespan and Higher Utility Bills.
What does a 4 ton AC unit cost?
You can get a 4 ton AC installed for less than $6,000. That cost includes the outdoor condensing unit, indoor evaporator coil, refrigerant line set, refrigerant charge needed to fill up the system and other installation supplies.How many BTU is 1300 square feet?
The 1,300-Square-Foot AnswerWhen looking for the quick answer to how much air-conditioning power you'll need to adequately cool a 1,300-square-foot space, the answer is 23,000 BTUs per hour of air conditioning power.
How much is an air conditioner for a 1200 square foot house?
The average cost of new central AC for 1,200 square foot houses is $5,700 for a 2 ton AC system. The average cost of central air for 1,700 square foot houses is $6,900 for a 3 ton system. The average cost to install central air conditioning in a 2,000 square foot houses is $7,800 for a 3.5 ton system.Can I replace a 3 ton AC with a 4 ton?
Proper size is a must. There is no reason for you to install a 4 ton if you can use a 3 ton. The low stage isn't that much less than full capacity because of the unloading scroll systems.How many rooms can a 3 ton AC cool?
It can be used to cool a single room or an entire house. So, how many square feet a 3-ton air conditioner cools? Generally, a 3-ton air conditioner can comfortably cool a 1500 square feet room. For an entire house, a 3-ton air conditioner is usually sufficient for a 2000 sqft insulated house.How many BTU do I need for a 1500 square foot house?
A 1,500-square-foot home will require between 45,000 to 90,000 BTUs. A 1,800-square-foot home will require between 55,000 to 110,000 BTUs. A 2,100-square-foot home will require between 65,000 to 125,000 BTUs. A 2,400-square-foot home will require between 75,000 to 145,000 BTUs.How much area does a 1.5 ton AC cover?
For instance, a 1-ton window AC or a 1.5 ton split AC is an ideal choice for rooms measuring up to 150-160 sq ft.How many BTUs does it take to cool a 1500 square foot house?
1,400 – 1,500 sq. feet: 23,000 BTUs. 1,500 – 2,000 sq. feet: 30,000 BTUs.How many vents should a 2.5 ton AC unit have?
For instance a 2.5 ton system (Approximately 400 CFM per ton) would require (2) 14” flexible return ducts or (1) very short flexible 18” duct to move the 1000 CFM required by the 2.5 ton system.
← Previous question
How long should you leave purple shampoo on dry hair?
How long should you leave purple shampoo on dry hair?
Next question →
How thick does steel have to be to stop a bullet?
How thick does steel have to be to stop a bullet?