What is the top of a turret called?
When the height of a roof turret exceeds its width it is usually called a tower or steeple in English architecture, and when the height of a ridge turret's roof exceeds its width, it is called a spire in English architecture or a flèche in French architecture.What are parts of a turret?
Parts Of Turret Lathe:
- 1) Legs: There are two legs present in Turret Lathe. ...
- 2) Bed: Bed is present over two legs. ...
- 3) Head Stock: All the gearing mechanism or driving mechanism of this lathe machine is present inside the headstock. ...
- 4) Spindle: ...
- 5) Chuck: ...
- 6) Driving Clutch: ...
- 6) Guideways: ...
- 7) Feed Rod:
What is a turret top?
Definition. A turret roof is a small tower that projects vertically from the wall of a building. A turret can have a circular top with crenelations as seen in the picture below, a pointed roof, or other kind of apex.What is the pointy top of a tower called?
The word that would be most easily recognised would be "spire", especially for the taller structures. This is usually used for the similarly shaped roof on a church. A slender, pointed construction atop a building, often a church. The descriptive phrase "conical roof" could be applied.What is the turret on a castle called?
In architecture, a turret (from Italian: torretta, little tower; Latin: turris, tower) is a small tower that projects vertically from the wall of a building such as a medieval castle.WW2 Ball Turret with Twin .50 Cals at the Big Sandy Shoot
What are the top bits of a castle called?
Battlements were the square-shaped part of the walls around the top of the castle. They usually had a walkway behind them so that soldiers could stand there when looking out for potential threats. They were also useful for soldiers who were defending the castle during an attack.What is a parapet on a castle?
1 : a wall, rampart, or elevation of earth or stone to protect soldiers The invaders fired arrows over the castle's parapet. 2 : a low wall or railing to protect the edge of a platform, roof, or bridge. — called also parapet wall.What are castle buttresses?
A buttress is an architectural structure built against or projecting from a wall which serves to support or reinforce the wall.What's the difference between a turret and a tower?
A turret is simply a small, circular tower attached to a larger structure, usually on a corner or angle. The difference between a turret and an actual tower is that turrets typically don't start at the ground level and, rather, cantilever out from another upper level.What are the spikes on a castle called?
A spiked wooden or metal barrier, called portcullis, helped protect the doors from fire and battering. It was lowered by chains from a chamber above the gateway. The word portcullis comes from the Old French porte-coleice, meaning sliding door.What is a turret wall?
1. a small tower that projects from the wall of a building, esp a medieval castle. 2. a. a self-contained structure, capable of rotation, in which weapons are mounted, esp in tanks and warships.How would you describe a turret?
a small tower, usually one forming part of a larger structure. a small tower at an angle of a building, as of a castle or fortress, frequently beginning some distance above the ground. Also called tur·ret·head [tur-it-hed, tuhr-].Is Turrent a word?
Turrent is not a word, it's turrets.What is a turret saddle?
The Turret Saddle and Auxiliary SlideIn a capstan lathe, the turret saddle bridges the gap between two bed-ways. And the top face is accurately machined to provide a bearing surface for the auxiliary slide. The saddle is adjusted on lathe bed-ways and clamped at the desired position.
How does a turret head work?
Turret tool head moves along with the saddle over the entire bed in the longitudinal direction. For indexing turret tool head, the handwheel of the ram is reversed and turret tool index automatically. For indexing turret tool head, a turret is rotated manually after releasing clamping lever.Which tools are mounted on the turret head?
Drilling, boring, turning, reaming, threading tools are mounted on the turret head.What are those castle things called?
These gaps are termed "crenels" (also known as carnels, or embrasures), and a wall or building with them is called crenellated; alternative (older) terms are castellated and embattled. The act of adding crenels to a previously unbroken parapet is termed crenellation.What is the round part of a castle called?
The tower is a circular or square building, which was used as a lookout and for defence.What is a square turret called?
A bartizan (an alteration of bratticing), also called a guerite, garita, or échauguette, or spelled bartisan, is an overhanging, wall-mounted turret projecting from the walls of late medieval and early-modern fortifications from the early 14th century up to the 18th century.What is the difference between a pier and a buttress?
In their simplest form, buttresses may also be referred to as piers. See Piers for more information. The term flying buttresses refers to an inclined beam carried on a half arch that projects from a structure to a pier which supports its weight and resists the horizontal thrust the of the structure.What is an arrow slit in a castle called?
An arrowslit (often also referred to as an arrow loop, loophole or loop hole, and sometimes a balistraria) is a narrow vertical aperture in a fortification through which an archer can launch arrows or a crossbowman can launch bolts.What is a roof buttress?
buttress, in architecture, exterior support, usually of masonry, projecting from the face of a wall and serving either to strengthen it or to resist the side thrust created by the load on an arch or a roof.What is the top edge of a building called?
In architecture, a cornice (from the Italian cornice meaning "ledge") is generally any horizontal decorative moulding that crowns a building or furniture element—for example, the cornice over a door or window, around the top edge of a pedestal, or along the top of an interior wall.What do you call the top of a wall?
At the top of the wall is the top plate. Often a doubled 2x4, it anchors the top ends of the studs as well as ties the wall into the ceiling. In new construction, the walls are usually built while on the floor, with a single top plate.What is the walkway on top of a castle wall called?
A chemin de ronde (French, "round path"' or "patrol path"; French pronunciation: [ʃəmɛ̃ də ʁɔ̃d]), also called an allure, alure or, more prosaically, a wall-walk, is a raised protected walkway behind a castle battlement.
← Previous question
Why do I stress about my job?
Why do I stress about my job?
Next question →
Who does the Equality Act 2010 apply to?
Who does the Equality Act 2010 apply to?