Is Pine Sol good for wood floors?

You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard, nonporous surfaces. You can apply it to the floor directly from the bottle.

Will Pine-Sol hurt wood floors?

If you use Pine-Sol or any other liquid cleaner on your floors daily, it can damage your hardwood. Additionally, soaking your floor with water and leaving standing water to dry will also damage the floor's integrity. You should still practice dry mopping methods and sweeping.

What is the best thing to use to clean wood floors?

In most homes, the best wood floor cleaner is plain old soap and water, and the only tools you need are a broom, vacuum, and mop. The best mop for wood floors is a microfiber flat-head or string mop you can easily wring out.

Do you have to rinse Pine-Sol off floors?

Usually no rinsing required. On wood surfaces, do not allow puddles of cleaner to remain. *Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.

Can you clean floors with Pine-Sol?

Pine-Sol is a gentle cleaner and the best way to clean linoleum floors. Dilute ¼ cup Pine-Sol^® to a gallon of water. Wipe those dirty floors down with the solution using a mop or sponge.

How to Clean Hardwood Floors with Pine-Sol

What should you not use Pine-Sol on?

According to Pine-Sol, you should refrain from using undiluted Pine-Sol on metal surfaces, such as copper or aluminum.

Which is better Pine-Sol or Fabuloso?

What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.

How much should I dilute Pine-Sol?

Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol^® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.

Is Pine-Sol a good cleaner?

A: Yes. Original Pine-Sol^® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

How often should you mop hardwood floors?

In high-traffic areas, like the dining room and kitchen, sweep or vacuum daily if possible and mop hardwood floors once or twice a week. Mop less-trafficked areas once a month or once a season.

Is Murphy's oil soap good for wood floors?

Whether you're cleaning one area or all of your flooring, Murphy® Oil Soap is safe to use on hardwood floors.

Can you use Dawn dish soap on hardwood floors?

Dish soap is a gentle cleaner that won't damage the natural wood, and it's perfect for light jobs and daily upkeep alike. In a large bucket, mix two to three tablespoons of dish soap with one gallon of warm water. Dip your mop and wring it over the bucket, then gently mop the surface of your floors.

How do you disinfect hardwood floors?

a disinfecting solution of 1/2 cup Clorox^® Disinfecting Bleach and 1 gallon water. the area, then mop or wipe with the disinfecting solution. for 5 minutes, then rinse thoroughly. Air dry.

How do you make hardwood floors shine like they are wet?

How harmful is Pine-Sol?

A new study out today reveals that numerous popular cleaner brands, including Glade, Clorox, Pine Sol, and the ostensibly eco-friendly Simple Green, contain chemicals that are known to cause hormone disruption, pregnancy complications, birth defects, and cancer, and can aggravate allergies.

Can you pour Pine-Sol down the toilet?

Steps For An Expert Clean

Cleaning toilets and disinfecting toilet bowls is easier with these tips. Pour Pine-Sol^® directly onto a sponge, rag or scrubbing brush. Wipe down the toilet tank, lid, seat cover and outside of the bowl, reapplying more cleaner as needed.

Does Pine-Sol leave a residue?

Pine Sol. Again leaves a residue on the floor that can build up over time and be harder to remove.

Is Pine-Sol good for kitchen floors?

Many different scents of Pine-Sol now exist today that can fill your kitchen with a pleasant aroma. The cleaning solution can be used many surfaces, such as vinyl, tile, porcelain and other nonporous surfaces. Pine-Sol removes dirt and debris and it also disinfects floors, which makes it ideal for the kitchen.

What is better than Pine-Sol?

Common household white vinegar is an effective cleaning substitute for Pine-Sol. Vinegar is nontoxic and since it is acidic, also dissolves stains on hard surfaces. Also, priced at just a few dollars a gallon, vinegar is less expensive than Pine-Sol.

Is Pine-Sol or Lysol better?

Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.

What is Pine-Sol used for?

You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!

Do mice like the smell of Pine-Sol?

Keep half pinesol / half water spray under sink, spray out of trash cans, or anywhere you have a pest problem. Animals such as rodents, possums, raccoons, etc. they don't like the smell.

Why is Pine-Sol so strong?

Full strength Pine Sol is made with real pine scent, just like the commercials claim. The fragrance used is pine essential oil. Grease-cutting surfactants and powerful cleaning agents, water, isopropanol (an alcohol solvent with antibacterial properties) and xantham gum round out the ingredient list.

Is Swiffer safe for wood floors?

According to the manufacturer's website, the Swiffer mop is appropriate for use on finished hardwood floors when you use either the dry or wet refill cloths. Wet refills aren't recommended for use on unfinished, waxed or oiled floors, and you should use them with caution on finished hardwood.