Is liquid chlorine better for pool?

Liquid chlorine and granular shock have the same active chemical that sanitizes your pool, what changes is the strength and the way you use it. Liquid chlorine is less costly, unstabilized and comes in liquid form. Granular shock is stabilized and comes in a solid form that dissolves in your pool.

Is it better to use liquid chlorine in a pool?

For pool service technicians and home owners seeking for an effective approach to treat pools this swimming season, liquid chlorine offers a proven, safe, and highly effective alternative sanitizing option. Chlorine kills bacteria that swimmers introduce into the pool as well as naturally present microbes like algae.

Is liquid or powder chlorine better for pools?

Powdered chlorine is the most typical form of chlorine used in a domestic pool environment. It is typically only slightly more expensive than liquid chlorine but it is much easier to use and has a lower pH, therefore has less impact on your pool's balance when used.

Is it better to use shock or liquid chlorine?

Liquid chlorine is generally less costly than granular shock and comes in refillable containers, where granular shock does not. Liquid chlorine does not need to dissolve in your water as it is already in liquid form. In addition, liquid chlorine is non-scaling and leaves no residue.

Does liquid chlorine work as well as tablets?

Chlorinating Liquid is a popular choice among pool owners and can be used as a substitute when chlorinating tablets may be unavailable. Chlorinating liquid is not stabilized, which means it may require a chlorine stabilizer to help the chlorine last longer.

Liquid Chlorine or Granular Chlorine Compared - Shock Your Pool

How often should you put liquid chlorine in your pool?

Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.

Does liquid chlorine raise pH?

Using liquid chlorine raises the pH of the water.

When added to water, liquid chlorine (which has a pH of 13) makes HOCl (hypochlorous acid – the killing form of chlorine) and NaOH (sodium hydroxide), which raises pH.

Is liquid chlorine better than granular?

Liquid chlorine may be a good choice if you have a large pool, but the costs associated with it, and the available chlorine per pound could mean that chlorine granules are the better option. In the end, both liquid chlorine and chlorine granules will do their job and keep your pool clean and clear.

Can I shock my pool with liquid chlorine?

Sodium hypochlorite (also known as liquid chlorine) is another frequently used option for shocking pool water. This is a common choice in pool shock because you can pour the solution directly into the pool without having to dissolve the chlorine in water beforehand.

How long does liquid chlorine last?

Liquid pool chemicals, on the other hand, tend to have a shorter shelf life. For example, dry pool chlorine will not expire for a long time, while liquid pool chlorine will expire quickly. If you have any pool chemicals in liquid form, they will only last up to two months before they begin to become ineffective.

Is liquid shock the same as liquid chlorine?

SKIMMER NOTES: No. Chlorine and shock are not the same thing.

Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No. Chlorine sanitizers and shock are similar but different in strength.

Where do you put liquid chlorine in a pool?

Pour the liquid chlorine into the pool with the jug as close to the water surface as possible in order to prevent splashing. Add the liquid chlorine to the deep end of the pool. After all of the liquid chlorine has been added, brush the walls and floor of the pool.

What is the difference between liquid chlorine and powdered chlorine?

Powder or granular chlorine is 65 percent to mid-90 percent. Liquid chlorine is basic or alkaline (high pH) and requires a conscientious effort for safe handling and storage. Although powder or granular packages offer greater convenience, they still require attention for transportation, storage and usage.

Are chlorine tablets necessary?

Most pool owners will need about 1-3 chlorine tablets a week to maintain a chlorine level of 1-3 ppm. If you are looking to raise your chlorine ppm by 1, it is a little trickier than liquid chlorine because of its slow to dissolve nature.

How long after adding chlorine Can you swim?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

Can you put too much liquid chlorine in a pool?

Having too much chlorine in your pool water can be dangerous. Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. Not only is it bad for your health, but it can be bad for your pool due to the increase in chlorine.

How much liquid chlorine should I put in my pool per gallon?

Generally, you should maintain the pool's chlorine level between 1 and 3 ppm. Thus, if the chlorine level is already 1 ppm and you want it higher, add 0.00013 ounces per gallon to raise the chlorine by 1 ppm.

Is liquid chlorine bleach?

Liquid chlorine

They are identical in every way, with the exception of strength. Household bleach is usually a 6% concentration (although some of the cheaper stuff is 3%), while pool chlorine can typically be found in strength between 10% and 12%.

Which pool chlorine is best?

Dichlor is perhaps the most “best of all worlds” chlorine sanitizer. It is typically found in concentrations of 60-65%, which is comparable to cal-hypo. It is a powder sanitizer, which makes it easier to spread or broadcast around the pool than chlorine tablets.

Can I add shock and chlorine at the same time?

While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.

How do you know if your pool has too much chlorine?

If the chlorine smell is very strong, however, you may soon spot “red-eyed” swimmers emerging from the pool. That's when the pool water is assumed to have “too much chlorine” in it. Ironically, a strong chemical smell around the pool and “swimmer red eye” may be signs that there is not enough chlorine in the water.

Does chlorine raise or lower alkalinity?

Most people know that chlorine is an important chemical in keeping pool water safe for swimming. But adding too much chlorine can lower your pool's pH as well as its total alkalinity.

How do you stabilize pH in a pool?

The ideal pH level for pool water is 7.4 – 7.6.

In that case, add baking soda to increase alkalinity and stabilize the pH. To decrease pH, use a pH decreaser such as sodium bisulphate or muriatic acid.

Should I put chlorine in my Intex pool?

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.