How often should you change your chainsaw bar?

If you are looking for a general idea for how often you should replace a chainsaw bar, a rule of thumb is to replace the bar of your chainsaw once after you have gone through three chains on the same bar.

How long does a chainsaw guide bar last?

Guide bars can last the lifespan of 4 chains, so this isn't a problem STIHL customers should encounter regularly, but if you have noticed some wear to the rails, check the groove depth using the tip of the depth gauge tool found in our filing kits.

How many times can a chainsaw chain be sharpened?

A chainsaw chain can be sharpened up to 10 times, sometimes more, before the entire chain needs replacing. It's mostly dependent on two things; the amount of wear your chain incurs and the amount of metal removed every time you sharpen.

Do chainsaw chains get dull?

A dull chainsaw chain is the last thing you want when you're about to get to work. At its worst, it can be downright dangerous, making your saw more prone to kickback. But even if this doesn't happen, it will still affect the performance of your chainsaw.

Why does my chainsaw blade go blunt so quickly?

If your chain dulls quickly, then it could be a couple of things. Check your user's manual to ensure that you are using the right sized file for your chain. Alternatively, you could be applying too much pressure when you file. This will create cutting edges that are too thin and dull quickly.

When A Chainsaw Bar Needs To Be Replaced!

When should you throw away a chainsaw chain?

The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.

How much does it cost to have a chainsaw chain sharpened?

The cost is $21.95 per chain for sharpening on the saw which also includes dressing the bar.

Are chainsaw sharpeners any good?

Yes, chainsaw sharpeners work exceedingly fine. The sharpeners come in basically two forms, manual and electrically powered sharpeners. Irrespective of your choice, both are good and have their advantages and disadvantages. Consider the pros and cons very well before deciding on the one that works best for you.

Why is my chainsaw bar smoking?

This most commonly is a result of a dull chain and exerting to much pressure on the bar and chain trying to make the chain saw cut. This could also be either a lack of bar and chain oil ( tank empty, restricted oiler hole ) or an inferior type of oil that is being slung off the chain and not lubricating.

Why is my chainsaw burning the wood?

Smoking or burning wood and excessive chain rattle without any cutting are all strong signs that the chain is mounted backwards. If this is the case, discontinue use of the chainsaw immediately until the chain is reinstalled the correct way.

What is bar oil for chainsaws?

Chainsaw bar oil is lubricant that is designed to reduce friction between the chain and bar. An oil reservoir releases the oil onto the bar. It's picked up by the chain as it travels around the bar and then flung off in tiny droplets as the machine runs.

Can a chainsaw bar be straightened?

Sometimes the chainsaw bar bends or breaks while handling heavy jobs. Severely bent chainsaw bars need to be replaced. However, a mildly bent bar can be straightened by following a few simple steps.

Should I sharpen my own chainsaw chain?

When Should You Sharpen Your Chainsaw Chain? A general rule of thumb is to sharpen your chain when you notice it is not cutting as well as before. Another way is to look at the sawdust if you see small chunks it is an indication that the chains are getting dull. Large chunks indicate a sharp chain.

What angle should a chainsaw chain be sharpened at?

The sharpening angle will generally be between 25° and 35° – the harder the wood, the greater the angle. To maintain the correct angle, we recommend that you use a sharpening grid or a filing gauge as an aid.

What is the hardest wood to cut with chainsaw?

How tight is too tight for chainsaw chain?

A properly-tensioned chainsaw chain should still be just a little loose on the chainsaw guide bar, but the chain needs to be tight enough that you can't pull the drive links out of the bar nose.

What chainsaw chain stays sharp the longest?

The x-Cut line of Husqvarna chains is also designed to stay sharp longer, so you can cut for a longer amount of time before the chain needs sharpening. The SP33G features semi-chisel cutters, a . 325 pitch, and a . 050 gauge.