How much does 5 gallons of driveway sealer cost?

Asphalt driveway sealants cost $0.06 to $0.38 per square foot, which works out to $40 to $165 per 5 gallons, based on the average 5-gallon sealcoat covering up to 500 square feet.

How many square feet will a 5-gallon bucket of blacktop sealer cover?

Asphalt Sealer Prices

Note: The typical 5-gallon sealcoat container can cover between 250-500 square feet depending on the material's condition and texture. For simplicity's sake, these examples use five gallons that cover the maximum 500 square feet.

How many square feet does a 5-gallon sealer cover?

5. Divide the square footage of the driveway by 80 to find the number of gallons of sealer you need for one coat. Each gallon covers about 80 square feet and each bucket of sealer contains 5 gallons.

What is the longest lasting driveway sealer?

Coal Tar Sealer

Coal tar asphalt driveway sealer is considered the standard for asphalt — in some places, that is. The preferred choice for both asphalt driveways and streets for many years, coal tar sealer is made from sticky coal tar. It can last for up to five years on a driveway.

How many coats of driveway sealer should I put on?

Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.

HOW MUCH DOES ASPHALT SEALING COST PER SQUARE FOOT?

Should I use a brush or squeegee driveway sealer?

Squeegee applications typically produce a better bond between the pavement's surface and the sealant. The pressure exerted by the squeegee forces the sealant into surface cracks and voids, creating a bond that is of higher quality while often yielding a smoother appearance.

Does sealing driveway fill cracks?

You can use epoxy sealants and caulks to both seal and fill driveway cracks, and caulking can be used to fill isolated driveway cracks.

Is sealing driveway worth it?

Yes, it is a necessity as you need to protect your valuable asset. If you want your driveway to last, seal coating is the way to go. Unprotected asphalt leads to cracks and potholes that can severely damage your foundation.

Is water-based driveway sealer better than oil based?

Sealcoating your driveway starts with deciding whether to use water or oil-based sealers. Although both types have advantages, water-based sealers' shorter cure time and eco-friendliness make it the better choice in many situations.

What is the best product to seal a driveway?

Best Value Driveway Sealer

If you're looking to keep your concrete driveway looking new for a reasonable price, MasonryDefender Penetrating Concrete Sealer is a great choice. Providing a long-lasting invisible coat, this water-based, eco-friendly sealer will protect against cracking and water damage.

Do driveway sealers need two coats?

Most driveway sealer manufacturers recommend two coats with a minimum drying time of eight hours between coats, so this driveway sealing project will fill an entire weekend.

How is sealcoat calculated?

It's easy to calculate how much sealcoat you need, simply measure the length L in feet and width W in feet of the area you want to seal. Multiply them together to get a total measurement in square feet.

How do I measure my driveway for sealing?

Simply measure the width and length of your sealcoating area, and multiply it to find how many square feet you are sealing. If it's a small driveway, then you can use a tape measure or measuring wheel.

How long does driveway sealer last?

Overusing sealer can cause peeling, flaking or cracking if it builds up. The industry standard is for sealcoating to be replaced every two years, which allows the sealer on your driveway or parking lot to wear away prior to resealing.

What happens if you don't seal your driveway?

As it deteriorates, it loses strength. As the surface becomes more exposed, you start to develop cracks in it that allow more water and oxygen in, and your pavement will deteriorate at a rapid rate." Carter said it doesn't matter whether the smooth, black surface wears off the asphalt driveway.

What is the best temperature to apply driveway sealer?

The best temperature range for applying sealcoat is between 55 and 90 degrees Fahrenheit. Ideal temperatures are those that start around 70 degrees Fahrenheit in the morning and increase throughout the afternoon.

How long does it take for sealcoat to cure?

To be safer, allow 48 hours to pass. If the air is humid and the weather is cloudy, another day of curing is highly recommended. Additionally, around 30 days is needed for the sealer to be totally dry.

Are all driveway sealers the same?

All asphalt driveway sealers provide driveway beautification and can increase the value of your Bay Area property, but protection and longevity will vary with type and grade. Identifying your sealant needs based on information rather than brand will help in choosing the right product for the job.

Do it yourself driveway sealer vs professional?

Obviously, the biggest advantage of sealcoating on your own is the substantial savings you get. With driveway sealers available in local hardware, hiring contractors is unnecessary. The average cost of asphalt sealing is around $487. If you already have the equipment, you can save even further.

Which is better latex or oil based driveway sealer?

The oil based, he said, will bind with the original paving material whereas latex will just cover it. That being said, if you sealcoat with a latex sealer, going over that coat with an oil based coating will do you little to no good.

Can I apply driveway sealer with a roller?

If you're applying an acrylic-based driveway sealer, which is designed for concrete or masonry surfaces, it can be applied with a roller. If you're applying an asphalt-based product, however, it must be applied with a squeegee.

How often should blacktop driveways be sealed?

Asphalt driveways should be resealed about once every three years to maintain their appearance and protect them from cracks and oil damage. As with concrete, finish the repairs, allow time for curing and clean before sealing. Asphalt sealer comes in 5-gallon drums that sell from about $8 to $20.