How do you make Pine-Sol disinfectant spray?

Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol^® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.

How do you mix Pine-Sol in a spray bottle?

Instead, I have found that a spray bottle with a Pine Sol/water mixture is a life saver. I grabbed a few inexpensive spray bottles at the store a while ago, at about $2.00 a bottle. For every 1 cup of warm water, I add 1-2 tbsp Pine Sol. Spray, wipe, move on!

Do you need to dilute Pine-Sol?

Pine-Sol^® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.

What is the ratio of dilute Pine-Sol?

A: You can use Pine-Sol^® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile, toilets, garbage cans and diaper pails. Just use 60 ml (¼ cup) per 8 L (1 gallon) of water.

What should you not use Pine-Sol on?

According to Pine-Sol, you should refrain from using undiluted Pine-Sol on metal surfaces, such as copper or aluminum.

How To Make Disinfectant Spray To Kill Virus

How do you make a Pinesol Multi Purpose cleaner?

Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol^® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away. Or for everyday mess control, keep the Pine-Sol® mixture in a spray bottle for quick cleaning spritzes.

What are the ingredients in Pine Sol?

How do you make natural pine cleaner?

Is Pine-Sol the same as Lysol?

Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.

Can you boil Pine-Sol with water?

Jill Michels, managing director of the Palmetto Poison Center, says boiling cleaning products on the stove isn't a good idea. "Cleaning products have chemicals in them that aren't meant to be boiled," Michels said. "When you boil them, they're vaporized into the air and it could cause a lot of irritation for people.

Can you mix vinegar and Pine-Sol together?

Taught You. “Fill up the sink with hot water & a cap full of your favorite Pine Sol floor cleaner. Add 2 tbsp of vinegar & use to clean any type of floor. I use this method on my hardwood floors to get a clean, smooth & shiny surface!”

Does Pine-Sol have alcohol in it?

In 2008, the material safety data sheet for the "Original Pine-Sol Brand Cleaner 1" formulation listed 8–12% pine oil, 3-7% alkyl alcohol ethoxylates, 1-5% sodium petroleum sulfonate and 1-5% isopropyl alcohol.

Which is better Pine-Sol or Fabuloso?

What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.

Does Pine-Sol multi-surface cleaner disinfect?

Pine-Sol^® Multi-Surface Cleaner is an EPA-registered broad-spectrum disinfectant. It kills household bacteria, including Salmonella choleraesuis and Staphylococcus aureus, on hard, nonporous surfaces when used as directed.

Is Pine-Sol antibacterial?

A: Yes. Original Pine-Sol^® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.

What is the cleaning agent in Pine-Sol?

The fragrance used is pine essential oil. Grease-cutting surfactants and powerful cleaning agents, water, isopropanol (an alcohol solvent with antibacterial properties) and xantham gum round out the ingredient list. Read on to see all the unexpected pine sol uses.

Is Pine-Sol a bleach?

As we have discussed, bleach isn't pure liquid chlorine; it's actually a sodium hypochlorite solution. The exact composition of Pine-Sol is a trade secret, guarded closely by Clorox, but one can assume that it contains acids or alcohols that will react negatively with bleach, producing chlorine gas or chloroform.

Does Multi Purpose cleaner disinfect?

Does all purpose cleaner kill germs? Your everyday all purpose cleaner won't kill germs. It's made to tackle dirt, grease, grime, and dust, but it won't kill germs or viruses that cause illnesses.

How do you clean a bathroom with Pine-Sol?

Steps For An Expert Clean

Add ½ cup of Pine-Sol^® to the water. Dip a sponge or scrubber into the bathtub and wipe down the tub and faucets. For cleaning stubborn rings around the bathtub, drain the water and apply full-strength Pine-Sol^® directly. Scrub down with a scrubbing brush and rinse with water.

Can you mix Pine-Sol and Lysol?

Pine-Sol gives the same advice. PineSol.com states, “We do not recommend mixing any Pine-Sol® product with other cleaning products or chemicals. Mixing cleaners can result in the release of hazardous gases.”

Can you pour Pine-Sol down the toilet?

Steps For An Expert Clean

Cleaning toilets and disinfecting toilet bowls is easier with these tips. Pour Pine-Sol^® directly onto a sponge, rag or scrubbing brush. Wipe down the toilet tank, lid, seat cover and outside of the bowl, reapplying more cleaner as needed.

What else can you use Pine-Sol for?

You could spend big bucks on different cleaners for your furniture, toilet, floors, counters and appliances. With Pine-Sol^® Multi-Surface Cleaner, you only need one cleaner to fight dirt, grime and grease, and deodorize all of these surfaces throughout your home. Easy for you, and easy on your wallet.

Can you use Pine-Sol to clean shower?

Pine-Sol can help you with shower cleaning, walls, and more. Clear shampoo, soap and other items from your shower so you can hit all the corners before you clean. Mix ⅛ cup of Pine-Sol^® in ½ gallon of warm water. Wipe down your shower walls with the mixture.