How do I know if my AC is 1.5 ton or 1 ton?

How do I know my 1 ton AC?

Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit's tonnage.

How do I read my AC model number?

Look at the model number (Located on the data plate stamped on the actual side of the compressor) on the compressor and there should be a number divisible by 12. It should start at 18 and not be more than 60 for residential AC units. 18 to equal 1.5 tons and 60 to equal 5 tons of cooling.

What is the room size for 1.5 ton AC?

Room size and power consumption

Here tonnage plays an important role. For instance, a 1-ton window AC or a 1.5 ton split AC is an ideal choice for rooms measuring up to 150-160 sq ft.

Can a 1.5 ton AC cool two rooms?

1.5 Ton Window AC has to work more for 2 rooms. Cost part will be of 1 AC but time taken to cool the 2 rooms will be more. However O General is much efficient than other ACs . It will serve the purpose better than any other AC.

1 Ton vs 1.5 Ton AC | AC 1 Ton vs 1.5 Ton - All you need to know

How many rooms can a 1.5 ton AC cover?

A 1.5 ton AC is adequate for a room of 120 to 190 square feet and a 2 ton air conditioner is needed for a room of 300 to 500 square feet.

What kind of AC unit do I have?

To determine the type of HVAC system you have, look for the number and placement of installed units, the piping configuration to and from the unit(s), and whether ductwork and vents are evident. Contact a heating and air service if you're still unsure about the type.

What is ton in AC?

A ton, as used in the HVAC field, is a term that describes how much heat the AC unit can remove from a home in one hour. The measurement for heat is the British thermal unit (BTU). One ton of air conditioning can remove 12,000 BTUs of air per hour. A four ton unit can move 48, 000 BTUs and so on.

How do I calculate air conditioner size?

Calculate Size

To calculate the size, simply multiply the length times the width of the room or area to be cooled. Then, as a practical number, multiply that total times 25 BTU. This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day.

How do I know if I have a 1.5 hp air conditioner?

Multiply the air conditioner's size in tons by 12,000 to convert its cooling capacity to British Thermal Units per hour. If the air conditioner has a 1.5 ton capacity: 1.5 x 12,000 = 18,000 BTUs per hour.

How tonnage is calculated?

tonnage, in shipping, the total number of tons registered or carried or the total carrying capacity. Gross tonnage is calculated from the formula GT = K₁V, where V is the volume of a ship's enclosed spaces in cubic metres and K₁ is a constant calculated by K₁ = 0.2 + 0.02 log₁₀ V.

What is 1.5 ton in AC?

1.5 Ton AC= 1.5 x 12000 = 18000 BTU/hr. 2 Ton AC = 2 x 12000 = 24000 BTU/hr.

What is 3 star and 5 star in AC?

The star rating of an electrical appliance is quantified in Energy Efficiency Ratio (EER). A 3-star AC has an EER that ranges between 2.9 to 3.09, and a 5-star AC has an EER of 3.3 or above.

What is the capacity of 1 ton AC?

A 1 ton AC can remove 12,000 BTUs of heat per hour whereas a 1.5 ton AC approximately removes 18,000 BTUs of heat per hour. In simpler terms, a 1 ton AC is perfect for a small room lesser than 180 sq ft but a 1.5 ton AC is ideal for medium or large sized rooms larger than 200 sq ft.

How many watts is a 1.5 ton AC?

1.5 ton of cooling = 1,500 watts.

What does Star mean in AC?

A star rating of an air conditioner is an indicator of its energy efficiency. This rating is awarded by BEE or Bureau of Energy Efficiency. A star rating is a good indicator for a consumer to understand the power required to run an AC.

What are the 3 types of air conditioning system?

Which AC is used in malls?

Typical System

Single level and smaller centers usually use unitary systems for a mall and tenant air conditioning; multilevel and larger centers usually use central plant systems.

Is 1.5 ton AC enough for 220 square feet?

If your room size is between 80 and 120 square feet in area, you can effectively cool the room with a one ton air conditioner. A 1.5 ton AC will be adequate for a room size ranging from 120 to 190 square feet and you may need a 2 ton air conditioner for a room size ranging from 190 to 300 square feet.

Can we use 1 ton AC big room?

For a room of such capacity, a 1 ton AC turns out to be the best air conditioner option as it can cool the place well. It won't take a lot of time for a 1 ton AC to cool down an average living room space. However, if you have a living room which is larger than 200 square metres, then a 1 ton AC might not do the job.

How many sq ft will a 1.5 ton AC unit cool?

A 1.5-ton AC unit covers 900 square feet of living space.

Can 1 AC be used for 3 rooms?

Answer is NO. Similarly from one outdoor unit you can operate only one indoor unit of an AC.