Can I spray wd40 on my serpentine belt?

If your alternator belt squeaks, or your power steering belt starts slipping, the noise can be infuriating. With this specially formulated spray from WD-40 Company, squealing belts are no problem at all. Just spray a little WD-40 Specialist Automotive Belt Dressing with the engine running.

Can I use silicone spray on my serpentine belt?

Trusted mechanic suggested spray silicone to quiet squealing belt. Tried it and it worked. Did it several times over a period of about 6 months or so. Serpentine belt broke most of the way across and beat the underhood mat up.

What does it mean if your serpentine belt is squealing?

The serpentine belt in your car drives several accessories such as the power steering pump, alternator, air conditioning compressor, and the water pump. When you start to hear that squealing sound, that could mean that your pulley is misaligned, belt is cracked or your belt is slipping due to the loss of tension.

Can I drive with a squeaky serpentine belt?

That's why it's recommended that the serpentine belt is replaced early when the squealing symptoms are first noticed. Although it may be safe to drive with the squealing for a few days or weeks, the belt will eventually need to be replaced, and for safety, the earlier it's repaired, the better.

Should you use belt dressing on a serpentine belt?

Should I use belt dressing on my serpentine belt? Yes. You should apply it to the grooved side of the belt every 3,000 miles or with every oil change. Doing this will help prolong the life of your belt and prevent any belt slip problems.

How to QUIET a squeaky belt

What does a worn serpentine belt sound like?

As these belts wear out, they can begin to squeak or squeal. They make noise because there is not enough tension on the belt, or because the pulleys are misaligned or weak. Often, simply changing the belt will make it stop squealing. The noise isn't usually a danger, though it does sound alarming.

Can a tight belt cause squeaking?

A Belt That Is Too Loose or Too Tight

A belt that is either too loose or too tight will often slip against the pulleys, causing the squeal. While the motor is running, pour water over the squealing belt. It the noise stops, it tells you the belt needs tightening.

Why does my belt squeal when I start my car?

Cold and dew can affect the shape and grip of a serpentine belt. So if you start your vehicle and it squeals for a little while and then stops, this is your issue. This is more likely to occur in older belts, so replacing the belt is the easiest way to go about fixing it.

Can you put soap on a serpentine belt?

That's right, ordinary bar soap can usually stop the squealing when rubbed on a fan belt. Just a few rubs on the belt with bar soap can solve the bar squealing problem for quite some time and save money in the process.

Can you lubricate idler pulley?

Hold the pulley arm with the shaft pointing upward and apply three or four drops of lightweight household oil to the pulley shaft. Rotate the wheel back and forth to allow the oil to penetrate, then spin the wheel to ensure that it's turning freely.