Can hot tubs be shimmed?
Shims work great to level a hot tub as long as the hot tub slope is not greater than 1 inch. If the difference from one side to the other is greater than 1 inch, using shims could put excess stress on the hot tub's frame and shell which could lead to cracking.Is it okay to shim a hot tub?
You can absolutely shim a hot tub level. For many people, tearing up the patio/deck/concrete slab their hot tub lies on and replacing it with a level foundation is not a financial option. This is where shims come in handy. The majority of hot tubs come with shim points.Can a hot tub be slightly unlevel?
Leveling a hot tub that is on uneven concrete can be done with simple shims if the slope is less than one inch. For steeper slopes, leveling will require more involved solutions such as custom-built pads of wood, sand or gravel, or even a new concrete pad. We've written how to level hot tub on gravel before.Can you shim a Hot Springs hot tub?
WARNING: The Landmark® must not be shimmed in any manner. NOTE: All dimensions are approximate; measure your spa before making critical design or pathway decisions.Does hot tub have to be perfectly level?
A hot tub has to be perfectly level. It can be on almost any flat, level, surface. It should not be placed on grass or the earth. Always ensure the surface you are placing the hot tub on can hold the weight of a hot tub filled with water and people.Hot Tub Bases How important is it to your hot tub?
How much does an empty hot tub weigh?
However, in general, a small hot tub (sized for two to three people) will weigh about 500 pounds when empty, while a large hot tub (sized for up to six people) will weigh about 1,000 pounds when empty. Based on these averages, you can assume a medium sized hot tub is around 750 pounds when empty.How much slope should a hot tub pad have?
If your spa's pad is slightly sloped it will not affect the performance of the spa or its structure, however, there should be no dips, sags, or unevenness in the pad. Most patios are built to slope away from the house for drainage purposes. There should be no more than a ½” (1.27cm) slope in an 8'(2.44m) run.How much is too much slope for a hot tub?
There should be a maximum of ½” (1.27cm) slope in an 8' (2.44m) run. Do not use shims to level the spa, this could create tension on the spa shell which might result in damaging your spa.Can a hot tub pad have a slope?
If you are going to pour cement pad put a slight slope in it so that water won't pool under the spa. A 3/4″ slope in a 10 foot wide cement pad is adequate. If you use bricks or patio blocks, they should set on at least a 3″ base of sand, pea gravel or crushed stone.What is a spa leveler?
A Solid, Custom Built, Secure Base for Your hot tub!The Spa Level-R™ is a solid, secure base used to level your hot tub. It elevates your hot tub off the ground to encourage proper water run-off which will: Protect the hot tub base from wood rot damage. Eliminate green mildew stains on your concrete.
How do you make a gravel pad for a hot tub?
Gravel Base
- Remove the sod from a section of lawn that is large enough to hold your tub.
- Dig out an area several inches deep and make sure the ground at the bottom is pressed flat.
- Fill the hole with gravel and press it down to make sure it will not shift or sink once it has weight on it.
Does a lazy spa need to be level?
Your Lay‑Z‑Spa should always be setup on flat and level ground. If your flooring is uneven or not level, you could encounter issues of unequal water distribution and unequal pressure on your hot tub liner. Not least will it be less comfortable.What is the best thing to put under an inflatable hot tub?
A foam sheet is a great way to add ground insulation. You can buy a foam sheet at a home improvement store, and cut it to fit the bottom of your hot tub. Once you place it on the foam, it should be level and able to support the weight of the inflatable hot tub. You can also use old flooring tiles as a ground insulator.Can a hot tub sit on gravel?
Gravel PadsThe construction gravel should be topped with another layer of smaller sized pea gravel until it is perfectly even with the edges of the excavated area. So yes, a hot tub can sit on gravel! To find out more about hot tub installation requirements, download a hot tub buyer's guide.
How much does it cost to pour a concrete slab for a hot tub?
Hot Tub Concrete Pad CostA concrete slab costs $5 to $10 per square foot or between $500 and $2,500 for a hot tub. Other options for a hot tub foundation pad are an existing patio, gravel base, pavers, reinforced deck, or plastic spa pad.
Do I need a concrete slab for a hot tub?
A hot tub does not have to sit on concrete and can be placed on any stable, level surface that will not become unstable due to moisture or weight. Those surfaces include wooden decks, paver stones, gravel beds, or spa pads.How much room do you need around a hot tub?
A good rule of thumb for a hot tub is to give yourself about a foot of space on each side of the tub. This leaves room for things like opening the cover. Most covers require at least 18 inches of space behind the tub as well as a few inches on the left and right side for the arm that helps you lift the cover.Is it easy to move a hot tub?
Spas can be quite large and awkwardly shaped. But properly prepared hot tubs are easier to move than you might think. Although enlisting friends to help is not the best way to move a hot tub safely, and moving a hot tub on your own could be expensive and void any existing warranty (more on that below), it is possible.How close to the house can you put a hot tub?
Proximity to the house. To reduce the risk of electrocution, place your tub at least 16 feet away from overhead power lines. To protect your home and outbuildings from potential flooding, keep it at least 5 feet from any structure.
← Previous question
What is the most common misconception surrounding mental illness EMT?
What is the most common misconception surrounding mental illness EMT?
Next question →
What does the name Roblox actually mean?
What does the name Roblox actually mean?