Will shocking a well get rid of coliform?

When done properly, shock chlorination will kill all the bacteria existing in a well. A recent Penn State study of wells contaminated by coliform bacteria found that shock chlorination and installation of a sanitary well cap successfully removed the bacteria for one year in 15 percent of the wells.

How do I get rid of coliform in my well water?

A chlorine solution is the simplest and most effective agent for disinfecting a well, pump, storage tank or piping system. Liquid household bleach is the most commonly available source of chlorine. Regular Purex or Clorox may be used, but DO NOT USE LAUNDRY DETERGENT with bleach added.

How long does it take for water to clear after shocking a well?

It will usually take 4 to 8 hours to flush the well after a standard well chlorination. The water may become discolored during flushing because the chlorine may have loosened the hard water deposits in the plumbing. Caution: The chlorine must be completely flushed from plumbing system.

How do I get rid of bacteria in my well water?

How often should a well be shocked?

Homeowners with private wells should have their well water tested every 3 to 5 years for some contaminants, including bacteria. If these tests turn up positive for bacteria, chlorinating the well may be a way to resolve the problem.

Well Water Safety Module 5: Total Coliform in Well Water

How common is coliform in well water?

Coliform bacteria are one of the most common water contamination problems in private water systems in Pennsylvania and throughout the United States. A 2006 survey of 450 private wells found coliform bacteria in approximately 35 percent and E. coli bacteria in about 15 percent of private wells.

Can you filter coliform out of water?

Biological contaminants such as coliform bacteria are most effectively eliminated through chlorine disinfection, filtration, ultraviolet irradiation, and ozonation.

Does shocking a well work?

Although shock chlorination will sanitize wells, it may temporarily increase the arsenic levels of water in areas where aquifer sediments contain high levels of arsenic (WDNR, 2008).

How much does it cost to remove coliform from well water?

If you hire a company to do it, it can cost anywhere around $100 depending on where you live.

Can you put too much bleach in a well?

According to AskingLot, if you put too much bleach in your well, it can destroy the good bacteria found in the well, which can be a significant problem! The company also says that you should dilute the bleach with water so the pipes do not get ruined.

How long should you wait to shower after you chlorinate a well?

Do not shower for at least 24 hours after shocking your well. Waiting for one or two days more, if possible, is much better. Chlorine levels in the well water will go down only after freshwater dilutes and replaces chlorinated water. This process can take 1-2 days.

What causes coliform in well water?

Coliform can enter your well through groundwater, surface water run-off, cracked or broken well parts, poor construction, and leaking septic tanks. Coliform in your well water can mean there are disease-causing organisms such as E. coli.

How much bleach do I use to shock my well water?

Mix 2 quarts bleach in 10 gallons of water; pour into well. Connect a garden hose to a nearby faucet and wash down the inside of the well. Open each faucet and let the water run until a strong chlorine odor is detected, then turn it off and go to the next one. Don't forget outdoor faucets and hydrants.

Is it OK to have coliform in well water?

Most coliform bacteria are not harmful. However, some can make you sick. A person that has been exposed to these bacteria may have an upset stomach, vomiting, fever, or diarrhea. Children and the elderly are more at risk from these bacteria.

Can you drink water with coliform?

Coliforms are not one kind of bacteria, but many, and they can make you sick if ingested from drinking water. But most coliforms are harmless residents of soil and will not make people sick. Some strains of E. coli, the most common fecal coliform bacterium (usually living in animal fecal material) may cause disease.

Can you fix a contaminated well?

On-site treatment processes like disinfection, distillation, and filtration may remove the contaminants found in your well water. However, depending on the contaminant, its concentration, and the condition of the well, you may need a new source of water or to drill a new well.

Does Zero water filter remove coliform?

I like the zero installation Countertop Reverse Osmosis Water Filter. It looks really nice on any counter and works very well. It has a 4 stage system that removes coliform plus so much more. It also adjusts the pH to a more normal level of around 7 pH.

Should you put Clorox in your well?

You can disinfect your well with household chlorine bleach such as Clorox, Purex or a generic brand. The chlorine in the bleach kills bacteria. Note that it may take more than one chlorination for your well to return a satisfactory test.

Should I shock my water well?

Wells should be shock chlorinated when a well water sample result shows that there is bacteria in the water. Any time a well is opened for repair it must be disinfected. Newly-built wells should also be shock chlorinated following construction.

Why does my well water turn brown when I add bleach?

The brown is the iron in the water that has oxidized as a result of the chlorination. Normally, the iron in water is in ion form and does not display itself until it combines with oxygen and forms common rust which turns the water reddish-brown.

What does a positive coliform test indicate?

What does a positive coliform test result mean? A positive coliform test means possible contamination and a risk of waterborne disease. A positive test for total coliforms always requires more tests for fecal coliforms or E. coli.

Is total coliform harmful?

Total coliforms are a group of related bacteria that are (with few exceptions) not harmful to humans. A variety of bacteria, parasites, and viruses, known as pathogens, can potentially cause health problems if humans ingest them. EPA considers total coliforms a useful indicator of other pathogens for drinking water.

How do you shock a well?

Use ordinary liquid laundry bleach to shock chlorinate the water system. Determine how much bleach to use, then pour the bleach down the well and circulate it through the whole water distribution system. Wait 6-12 hours for the chlorine to work, then flush the chlorinated water from your well and pipes.

Can I shower if my well has coliform?

Drinking water used for brushing teeth should be of safe water quality (e.g. boil water for one minute, bring water from a safe source, or buy bottled water). Showering with water that is bacterially unsafe (total coliform positive, E. coli negative) has a far lower risk of illness than drinking this water.

Do most wells have coliform?

Various types of Coliform live in the soil and even on surfaces in your home, but they do not occur naturally in groundwater. If Coliform bacteria (sometimes reported as Total Coliform) are found in your well water, it is an indication that disease-causing bacteria could get in the same way.