Will Lime Away damage plastic?

LIME-A-WAY^® is not recommended for use on stone. The active ingredient within the formulation dissolves minerals; many of which are within surfaces such as marble and granite. Vinyl or any other form of plastic can be easily damaged by the ingredient within the formulation.

Is CLR safe on plastic?

Do not use CLR Calcium, Lime and Rust Remover on any natural stone or marble (including cultured marble), terrazzo, colored grout (any other color than white), any painted, coated, sealed or metallic glazed surfaces, plastics, laminates, Formica, Corian, aluminum, galvanized metals, nickel, oil rubbed bronze, brass, ...

What's the difference between CLR and LIME-A-WAY?

Anyway, the ingredients – Lime Away uses sulfamic acid while CLR uses a combo of lactic acid, gluconic acid, and a few other solvents. Too much detail? All you need to know is that they both are made specifically for water stains and break them down well.

How do you get lime off plastic?

Is LIME-A-WAY corrosive?

HARMFUL IF SWALLOWED. Read precautions on back. / KEEP OUT OF REACH OF CHILDREN DANGER: CORROSIVE. HARMFUL IF SWALLOWED.

Lime Away Damage Chrome

Can you use Lime-A-Way on acrylic tubs?

Yes, acrylic tubs can turn yellow due to harsh cleaning solvents and hard water stains. You can use vinegar and lime away to remove them. To prevent them, it's best to only use approved cleaners and products to clean your acrylic bathtub. Read more about Lime Away on Amazon.

Can you use Lime-A-Way on car windows?

LIME-A-WAY^® is meant for cleaning in the bathroom, and is therefore is not recommended for use on most metallic surfaces. Using the product on a vehicle surface may cause paint damage, etching, discoloration, etc.

How do you clean plastic?

Use a nonabrasive, all-purpose cleaner. Rinse with clean water and dry with a clean, soft cloth. Avoid using abrasive cleanser that may scratch the plastic. Use a tub/tile/sink cleaner; nonabrasive, all-purpose cleaner; or a paste of baking soda and water.

How do you get white residue off plastic?

What happens if you leave CLR on too long?

3. Don't leave CLR for longer than two minutes. Again, CLR is acidic, which makes it effective, but also means it can cause damage if left in contact with surfaces for too long. Always rinse away with cool water after two minutes of contact.

Can you use lime away on glass?

As hard water stain removers go, LIME-A-WAY is fast and easy. You don't need to kneel, squat or scrub to erase ugly residue from tubs, glass shower doors, sinks, faucets, shower heads and drains with LIME-A-WAY spray cleaner.

How do you neutralize Lime Away?

You can get rid of the lime stains with a citric cleaner safely, but once you have the black surface from the LimeAway it is very hard to fix. Best solution most people find with safe materials is to refinish the steel with ScotchBrite (TM) or similar non-iron containing abrasive. It will be some work.

Can you use CLR on plastic shower heads?

Thankfully, there's CLR® Calcium, Lime & Rust Remover to quickly and safely give you a clean showerhead once again. There are two ways to remove this hard water stain.

Can you clean yellowed plastic?

Cleaning Yellowed Plastic Containers With Vinegar

In the sink, add a tablespoon of Dawn, two cups of vinegar, and water. Allow the plastic containers to soak for 15-30 minutes. Use the bristle brush to scrub the containers. Rinse with water and dry.

Why does plastic turn white?

Most polymers contain both crystalline (neatly ordered) and amorphous (unordered) areas on their molecular chains. Heating a polymer can cause the amorphous sections of the chain to crystalize. When that happens, the way the molecules scatter light changes and the plastic turns white.

What is the white stuff on my plastic containers?

A common reason that a fine white film begins to take over the surface of the plastic ware is hard water. If your water that flows from the tap has an excessive amount of minerals, then it can etch the relatively soft sides of plastic bowls, plates and cups.

What is a good plastic cleaner?

To clean plastic, mix equal parts white vinegar and water in a container. Then, apply the mixture to the plastic and rub it in using a clean cloth or sponge. When you're finished, rinse the plastic off with water. You can also clean plastic using a paste made out of 3 parts baking soda and 1 part water.

Does vinegar hurt plastic?

The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode.

Does baking soda damage plastic?

Baking soda not only cleans the plastic but removes the scents of dishes past, often after just one wash. Before working with baking soda, clean the plastic in warm water, not boiling, and dish soap.

Can you put LIME-A-WAY in the toilet tank?

Most of the work for you is done by LIME-A-AWAY. A quick brush around the inside of your bowl helps remove dissolved hard water from surfaces. The toilet is clean after a simple flush. Lime-a-way has ingredients that eliminate hard water build-ups.

Does lime dust damage car paint?

Also known as calcium hydroxide, lime is a highly reactive alkali that can damage the paint and expose the metal beneath to moisture and oxygen which causes corrosion. The likelihood of lime damaging car paint is higher on vehicles that haven't been waxed or lack any form of paint protection.

How do I know if my tub is acrylic or fiberglass?

Look around the tub's edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.

How do I get hard water stains off my acrylic tub?

Baking soda can remove hard dirt from the acrylic. For tough stains: First, fill the tub with hot water and vinegar. Allow this soaking mixture to stay for 15 minutes or more to loosen any mildew and scum, then drain the water. Use a damp cloth or sponge to scrub the baking soda into the tub and faucets.