Why won't my PC connect to my monitor with HDMI?

Check Your Connections

In particular, ensure your monitor is plugged into the wall and receiving power, and double-check that the cable going to your PC is firmly plugged in at both ends. If you have a graphics card, your monitor should be plugged into that, not the HDMI port on your motherboard.

How do I get my computer to recognize my monitor with HDMI?

Step 1: Launch the Windows Settings Menu and select System. Step 2: On the left-hand pane, select Display. Step 3: Scroll to the Multiple displays section and tap the Detect button. Now check if your PC detects the connected HDMI monitor.

Why is my monitor not detecting my PC?

Turn the computer off and on to refresh the connection. Use the monitor's built-in controls and select the correct input port. Check the signal cable connection between the monitor and the graphics card. Disconnect the signal cable from both ends, wait 60 seconds, and firmly reconnect it.

Why does my monitor say no signal when HDMI is plugged in?

A faulty, loose, or wrongly-placed cable is one of the most common reasons for a monitor saying no signal. Here's how to properly check your DVI, HDMI or DisplayPort cables: Unplug each cable and then replug them. Ensure each one is properly connected (fully pushed in).

Why does HDMI say no signal?

Note: This message may appear after updating your Android TV™ software. Make sure the correct input is selected. This message will appear if you select an input that's not connected to an active device. Verify that the source device has power and is turned on.

How to Fix Computer No Display or No Signal on Monitor

How do I activate my HDMI port?

Right-click the "Volume" icon on the Windows taskbar, select "Sounds" and choose the "Playback" tab. Click the "Digital Output Device (HDMI)" option and click "Apply" to turn on the audio and video functions for the HDMI port.

Why is HDMI not working?

If you want to connect your Android phone or tablet to the TV, make sure the HDMI connection setting is enabled on your device. To do it, go to Settings > Display Entries > HDMI connection. If the HDMI connection setting is disabled, enable it.

How do I switch to HDMI on my monitor?

Right-click on the volume icon on the taskbar. Select Playback devices and in the newly open Playback tab, simply select Digital Output Device or HDMI. Select Set Default, click OK.

How do I know if my HDMI port is enabled?

Look at the status of your HDMI port in the dialog box. If the status reads "This device is working properly," your HDMI port is functioning. If there is a message indicating that you need to troubleshoot your device, your HDMI port is in working condition but has a problem that is likely fixable.

How do I fix my HDMI not working on my computer?

How do I use HDMI on my PC?

Why does my monitor say no video input?

If your video cable has become loose, the image signal won't be transmitted and it can cause the No video input message on your monitor. So, you want to make sure that your video cable is functioning correctly, then reconnect your monitor to your computer.

How do I change my monitor source?

A solution to your problem would be to purchase an HDMI Switcher. You could then connect a single display (your monitor) and each of your inputs (PC and Digibox) and have the ability to switch between them with the push of a button, or with a remote - depending on the switcher you purchased.