Why was it called a wedge motor?

The 413 Max Wedge

Mopar engines had been burning up tires and setting records across America. In 1962, both the Plymouth Belvedere and the Dodge 330 could be ordered with a 413 cubic-inch engine at 13.5:1 compression. The unique wedge-shaped combustion chambers gave this engine the “Max Wedge” name.

What makes a Mopar engine a wedge?

Mopar engines were referred to as "wedge" engines because they used wedge-shaped combustion chambers; this was different from Chrysler's 426 Hemi big-block engines that were typically referred to as "Hemi" (as in 426 Hemi, for example) due to their hemispherical-shaped combustion chambers.

Did Chrysler make a 426 wedge?

The Max Wedge, formally the Maximum Performance Wedge, was an engine option produced by the Chrysler Corporation from 1962 to 1964, that was available exclusively in B Platform (intermediate) Dodges and Plymouths. The Max Wedge motor used the Chrysler RB Block, and was produced in 413 and 426 cubic-inch iterations.

How much horsepower does a 426 wedge have?

The Dodge Ramcharger 426 and Plymouth Super Stock 426 were rated at 415 horsepower and 425 horsepower, depending on compression ratio, 11.1:1 and 13.1:1 respectively.

What makes a Max Wedge engine?

Originally debuting on 413 cubic inch motors, the Max Wedge featured significantly larger ports and valves, forged rods and pistons, an aggressive camshaft, twin carburetors, and a compression ratio of up to 13.5:1. Power was rated at a maximum of 420 ponies with torque checking in at an incredible 500 lb-ft.

The History Of The Chrysler B

How much horsepower does a 426 have?

MoPar 426 Hemi

The 426 street Hemi was rated at 425 horsepower from the factory. This Chrysler dyno sheet from decades ago and this close-to-stock dyno session of a new 426 Hemi both put the gross horsepower rating at about 470 horsepower without full exhausts and other engine-driven accessories.

What year did they make 426 Hemi?

Known as the "Elephant" engine due to its massive size and cylinder heads, the 426 Hemi arrived on dealer showrooms in 1966, available in several models in the Dodge and Plymouth full-size lines.

Why is it called a Max Wedge?

The cars were powered by high-output wedge-head V8s designated by Chrysler Corporation as Maximum Performance powerplants. Before too long, factory engineers, enthusiasts, racers, and buff-book writers, all with known propensities for too-cool nicknames, had simplified the moniker to Max Wedge.

Did Ford ever make a Hemi engine?

Everybody (well almost everybody) already knows about Ford's 427ci SOHC hemi that was available over the counter at Ford dealers but never was placed under the hood of a production car.

What is a 413 Dodge motor?

The 413 cu in (6.8 L) RB was used from 1959 to 1965 in cars. It was also used in medium and heavy trucks including truck-tractors such as the C-1000, up until 1979. It has a bore of 4.1875 inches.

What car has a 413 engine?

The 413-cid V-8 had been around since 1959, but not until '61 did it find its way out of big Chryslers and into smaller Dodges and Plymouths.

Is a Dodge 383 a big block?

The 383 Chrysler B engine is known as the Mopar big block that nobody loves. Typically, gearheads favor its beefier big brother, the 440. The 383 B is characterized by its large cylinder bore of 4.25 inches with a short stroke of 3.375. (That is in comparison to the 440's 3.75.)

What is a crate motor?

Crate engine. A "crate engine" or "crate motor" is a fully assembled automobile engine that is shipped to the installer, originally in a crate. Crate engines are manufactured by many different companies, but they all share the same characteristics of being complete engines ready to install once removed from the crate.

Was there ever a 440 Hemi?

The rarest is the Hemi-powered Coronet 440 convertible (440 was the trim level not the engine). Only six were built.

Is the 440 a wedge engine?

The 440 took the 413 cubic inch wedge's fundamentals and bored it out for extra displacement, The 440 was the final evolution of the RB design that had given birth to the earlier 'wedge' engines, and its massive size gave it much more torque than its predecessors (roughly 480 lb-ft).

What is a 440 Magnum engine?

We all know the 440 big-block is the largest displacement V-8 engine built by Chrysler, and when it comes to a combination of torque, power, and drivability, the 440 ranks as one of the best engines ever built.

Why did Nascar ban the 427?

Because of strong protests from the Chrysler camp, NASCAR threatened significant weight handicaps on Cammer-powered Galaxies, and the engine was eventually banned outright from competition.

Was there ever a 427 hemi?

Clyde Dedrick, a longtime drag boat and vintage Top Fuel guy, was asking if we'd like to come see a rare engine in his collection: a Mickey Thompson 427 Ford hemi, one of only a handful ever made.

What did the 427 motor come in?

The 427 lived in both station wagons and as well as Corvettes and Camaros. Fans of this engine tout the 435-horsepower L71 version of the 427 which powered the Chevy Corvette from 1967-1969. These cars could run 13-second quarter-miles right from the factory, and that was absolutely cooking back in the late '60s.

Is a 426 Hemi a big block?

426 Hemi V8

“Hemi” is a shortened nickname for the hemispherical heads that sit atop a 426ci RB-Series big block V8. The 426 Hemi was offered in race cars for 1964, with 1966 being its first year in slightly detuned form for street Mopars.

What did the 440 Six Pack produce?

The factory rated the 440 Six Pack at 390 horsepower and 490 lb-ft. The mild head porting and headers were responsible for our 28.6 horsepower gain. See all 33 photos As with the valve lash, the car owner didn't want to fuss with ignition points so an electronic distributor (Jeg's part No. 40506) was used.

What is the nickname of the 426 Hemi?

In the mid-'60s, Chrysler released the second-generation 426, using the term Hemi for the first time. This is the engine that earned it the "Elephant" nickname, based on its prodigious strength, power, and size.

What is a 426 stroker?

HEMI 426 Stroker Kit. Stroker rotating assembly kits provide the key internal components for an engine builder to complete a short block with a particular displacement target in mind. They are all pre-matched components with the appropriate measurements to support a precision engine build.

What is the biggest engine Dodge makes?

THE HEART OF THE BEAST

The 2022 Dodge Challenger isn't one to be messed with. Thanks to its Supercharged 6.2L High-Output HEMI^® V8 engine, the SRT^® Super Stock has the highest horsepower of any production car and is the most powerful muscle car( Disclosure3).