Why should plugs and cables not be left in the middle of the office floor?

Whatever you do, don۪t leave power cords randomly lying around your desk or office. Because of the risk from tripping and electrical hazards, you can become liable for any injuries that occur in or around your office.

Why is it important to keep cords off the floor of your workplace?

Prevent cable-related liabilities like tripping hazards by using floor cord covers to anchor foot-snagging to the floor. Cord covers offer you twofold protection: they prevent tripping accidents around the workplace, and they also keep valuable cables from being crushed underfoot by pedestrian traffic.

What is the risks of cables running across the floor?

One common trip hazard is cables running along floor spaces, but even small objects such as a discarded shoe or curled up edges of mats are enough to catch a person's foot.

How do you hide cords on office floor?

Consider a cord cover

Adhesive cord covers are a great solution for hiding wires in your home office. To use them, measure the path of your cables and cut the covers to the required sizes. Stuck them to the wall, floor or table. The cord covers come with special accessories that go around corners as well.

How do you hide electrical cords in the middle of the room?

20 MOMENTS YOU WOULDN'T BELIEVE IF NOT FILMED

How do you hide plug sockets and wires?

How do I hide the power strip on my desk?

The easiest way to hide a power strip is to obscure it behind furniture. Set the power strip behind the TV stand, desk, or sofa that it's next to. Simply slide your furniture out a few inches to give the power strip some space for air flow and keep it from resting directly against any furniture.

How should you secure cords in your workplace?

Clip it to keep it handy.

Desktop clips help keep these small cords organized and easily accessible. For larger cords, use cable clips and hooks to lift cables out of the way and keep them secured in place.

What does OSHA say about cables?

Cable assemblies and flexible cords and cables shall be supported in place at intervals that ensure that they will be protected from physical damage. Support shall be in the form of staples, cables ties, straps, or similar type fittings installed so as not to cause damage.

What are the electrical hazards in the office workplace?

The main dangers of electrical hazards are electrical shock and/or fire. Nearly half of incidents involve people working on electrical equipment while it was energized. Other causes of injury involved malfunctioning meters, faulty equipment and the use of equipment in close proximity to live electricity.

What does OSHA say about hanging extension cords?

Extension cords shall not be fastened with staples, hung from nails, or suspended by wire.

What are three safety guidelines for power cords?

Do match up the plug and extension cord on a polarized cord (one hole on the plug is larger than the other). Do keep extension cords away from water. Do use GFCI (ground fault circuit interrupter) protection when using extension cords in wet or damp environments. Do keep extension cords away from children and animals.

How do extension cords become exposed to hazards?

Overheated wire can melt the insulation and expose the wires to paper, cardboard, and other potential causes for a fire. Additionally, if the cord is a fairly long distance, it can lose power as well, causing even more potential electrical hazards in the workplace.

Why are extension cords a safety hazard?

Extension cords can overheat and cause fires when used improperly. Overheating is usually caused by overloading or connecting appliances that consume more watts than the cord can handle. Damaged extension cords can also cause fires.

What is the most common OSHA electrical violation?

The most frequently violated standard is the failure to prevent the release of hazardous energy while employees perform servicing and maintenance activities.

What is the risk of cables?

Damaged wires and cables can cause electric shocks and fires. If too many devices are plugged into a circuit, the current will heat the wires to a very high temperature, which may cause a fire. If the wire insulation melts, arcing may occur and cause a fire in the area where the overload exists or even inside a wall.

Are cables a hazard?

Damaged wires and cables can cause electric shocks and present a fire hazard. Any electrical cables, power cords or extension cords that are damaged, or are not functioning properly, should be removed from service immediately.

Why should you not leave wires from electrical equipment trailing on the floor?

Corrosives and solvents can degrade the cord insulation. Do not allow cords to dangle from counters or hoods in such a manner that equipment could be unplugged, fall or cords could be tripped over.

What is the OSHA standard for flexible cords?

The OSHA construction standard requires flexible cords to be rated for hard or extra-hard usage. These ratings are derived from the National Electrical Code, and are required to be indelibly marked approximately every foot along the length of the cord.

Should power strips be on the floor?

To protect against tripping hazards and avoid overheating, it's best not to run any kind of power cord across a floor or underneath a carpet, floor, or wall covering.

Is it OK to plug a desktop into a power strip?

You can safely use a power strip for plugging in things like: Computers.

Where should you not place a power strip?

Power strips are not designed to be used this way, and doing so can result in a fire. Do not use standard power strips in moist environments, such as a bathroom, a kitchen countertop, or a garage that is not climate controlled. Water and power strips don't mix, and if they do, a fire may result.

Can you hide electrical outlets on wall?

Paintable outlet wall plates are also available. These customizable outlet covers are offered in metal or plastic and are textured to accept traditional wall paints—no primer necessary. Replace traditional outlets with pop-outs. Pop-out outlets are the modern solution for concealing traditional outlets.

Can you hide power cord in wall?

Avoid Running Power Cables Inside of Walls!

What is this? It can be done, but if a fire results from this, then the insurance company may find a reason to not cover the damages. If you want to safely run cables, and you need to get power to your television or other devices but need an outlet.

What hazards is exposed power cable?

Exposed wires present a danger of electric shock or electrocution. Using an open front plug poses the risk of contact with live wires when plugging it to a electrical outlet.