Why is my TV not finding digital channels?

First check that your TV is set to the correct Source or Input, try changing the Source or Input to AV, TV, Digital TV or DTV if you haven't already. If your “No Signal” message is not due to incorrect Source or Input being selected, then it's most likely caused by a set up or antenna fault.

How do I get digital channels on my TV?

To start, on your TV remote, select “Menu” and then “Settings.” Next, select “Channel Setup” and select “Antenna” or “Air,” depending on your TV. Make sure you are not on “Cable.” Select “Channel Search” or “Channel Scan.” Keep in mind that steps to perform a channel scan may vary.

Why is my aerial not picking up channels?

Make sure the cable of the aerial is properly connected

​So, when there's no image on the TV, the first thing you need to look for is a loose cable. Look at the back of the TV and make sure the cable is in its place. If not, find the cable and put it back where it should be.

How do you test if a TV aerial is working?

Test Your TV Aerial Cable

After that, wait for the scanning of TV channels. Another way to check the TV aerial is to take the TV to a socket that you are sure is working correctly and perform a test. If the TV can get a signal and identify the channels on another socket, you can rest assured that your TV is fine.

Why does digital TV keep losing signal?

The cable connecting your TV and the set-top box might be having issues. The connecting ends of these cables or the ports they are connected to may have been damaged or otherwise not working as intended. There can also be issues with the set-top box itself that causes it to stop sending signals to the TV.

Running a Channel Scan with a TV Antenna? Avoid This Common Mistake

How do I rescan my TV antenna?

If you don't see any of these options, you can usually perform a channel scan by selecting the Input button on the TV remote or in the TV's main menu, then choosing Antenna. Depending on the number of channels you can receive, it could take a few minutes to complete the rescan.

Do you need a decoder for digital TV?

You need a digital decoder also known as a Set Top Box (STB) also called a decoder, which is a device that will decode the digital signal to enable the channels to be displayed on your television set.

How do I switch my TV from analogue to digital?

To switch between TV systems, you have to manually change the TV signal sources, and go to [TV] > [Video Input] in Power Cinema to change the setting to [Digital TV] or [Analog TV]. Then perform a channel scanning again, and you can watch TV after the scanning is completed.

What aerial do I need for digital TV?

To get the best results, we recommend that you use use a wideband aerial. Also known as Type T (for 'total') or Type W (for 'wideband'), these cover the entire range of signals used to transmit digital TV and continue to work even if there are changes to your TV signals.

What antenna is needed for digital TV?

Generally, outdoor antennas will get better reception than indoor antennas and are strongly recommended for the most reliable reception. Simple indoor antennas may be sufficient for locations having strong TV signals. or an outdoor antenna may be appropriate.

Why did I lose channels on my antenna 2021?

It's possible that the TV signal for the channel you lost was stronger when you originally scanned than it is now. There can be many reasons for this, including time of day, atmospheric conditions, electrical interference, or a weaker signal due to obstacle or lower transmitter power.

How can I boost my indoor antenna signal?

Why would TV lose channels?

Missing channels are typically caused by antenna or set up faults. Please check that you've got your antenna cable connected properly to your TV, set top box or PVR.

How do I fix channel auto scan?

Do indoor digital TV antennas work?

Not really. Indoor TV Antennas are very small in size and strength, and therefore the indoor Antenna does not give a good signal to the TV.

What kind of antenna do I need for my TV to get local channels?

UHF/VHF rated antennas should be used to receive the most important channels (ABC, NBC, CBS, FOX, etc.)

Do modern TVs need an aerial?

Modern smart TVs use a broadband aerial signal to connect to the internet and streaming services. With the rise of on-demand video services, and people wanting to use a streaming app, such as BBC iPlayer, Netflix and YouTube, internet connections are becoming increasingly important for TV sets.

Are all TV aerials digital?

There is no such thing as a Digital Aerial. Aerials that were installed long before digital TV was created, are still capable of getting Freeview, as long as they are in range of a Freeview transmitter.

Can you watch TV without an aerial?

The obvious alternative to watching not trough a aerial is to watch it through a satellite dish instead. To watch satellite TV you will need a satellite dish and a satellite receiver, this is usually a satellite set top box but many TV's have in built satellite tuners.

How do I get Freeview on my TV without aerial?

Can you get Freeview through WIFI?

Yes, you will need an internet connection to use the Freeview mobile app, either via wi-fi or your own data allowance.