Why is my Reolink camera offline?

Offline: the camera might be powered off or disconnect from the network. Invalid password: the password of the camera might be changed into another one. Or the one you entered for the camera into the menu of the NVR is wrong.

How do I get my Reolink camera back online?

Why won't my Reolink camera connect?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

Why is my Reolink not connecting to WiFi?

Solution: Go to Device Settings -> Wifi Settings, and check the WiFi signal bar in Reolink Client to see whether the signal is strong enough. If the WiFi signal strength decreases to less than one bar, it means the camera is too far away from the router or there might be too many barriers (such as walls) in between.

Why do my security cameras keep going offline?

There are several reasons why your camera may be offline, including a depleted battery, high bandwidth usage, updated router settings, or wireless interference. The camera is designed to automatically re-connect once there is internet available.

Reolink keep failing to connect

Why is my camera not connecting to WiFi?

Check if the power supply of the wireless IP camera is working properly. Make sure the power adapter is plugged into a working socket. If you get a battery powered wireless IP camera, check if the battery is still at work. Change or charge up the battery.

Can I reset my Reolink camera remotely?

Reolink camera/NVR can't be switched off remotely, but you can restore/reboot the camera/NVR remotely when you can still connect it.

How do I change the WiFi on my Reolink camera?

Where is the reset button on?

Alternatively referred to as the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

Why did my Reolink camera stop working?

For other Reolink PoE camera models, please make sure that the PoE injector/switch is 802.3af compliant (48V) and supports active mode. Please use another Ethernet cable and try a different port on the POE NVR/injector/switch. If the problem persists, please power the camera via DC adapter to see if it works.

Why won't my Reolink connect to my phone?

Please also reboot the device, and change another router/network if possible. Note: If you fail to log into your device via UID on Reolink App, please switch to another network (switch to 4G or another Wi-Fi) and try it again.

How do I connect my Reolink to the Internet?

Note: Make sure that the camera is powered on. Step 2: Launch Reolink App and log in to the camera, then enter the Device Settings->Wi-Fi interface. Step 3: Select the Network you would like to connect your camera to, then input the password and click Save button. Step 4.

How do I reconnect my camera?

How do I reset my Reolink WIFI IP camera?

Press the Reset button and hold on, then power on the camera while pressing the Reset button. Step 3. Hold for about 10 seconds then release the Reset button. After reset, your camera will return to factory default settings, then you can log in with the default username and password.

How do I connect to 2.4GHz WiFi?

How do I connect my WiFi camera to WiFi?

How do I fix my IP camera offline?

If the camera is still offline, there may be a problem with your home network. You can reset your home router and/or modem. A) Power off the camera (unplug the camera, or hold the button down for 5 seconds until the lights turn off; press it to turn it back on after about 1 minute.)

Why do my wireless cameras keep disconnecting?

There are two main reasons that a camera may lose WiFi connection. It may be installed too far from your WiFi router, or it may not have sufficient bandwidth on your WiFi. Please contact our customer support for help in diagnosing this issue and confirming the cause.

Why does my security camera Say no signal?

One of the most common problems when a camera is not displaying video is a bad cable or BNC connection. Using a test monitor, you can temporarily eliminate the power and video cable that your camera is using.

Does Reolink work with WiFi?

Reolink WiFi security cameras support 2.4 GHz or 5 GHz band. The camera gets power from the DC adapter and transmits videos through the WiFi connection with your router. Without the Ethernet cable installation limit, you may install Reolink WiFi security cameras anywhere with WiFi network covered and well power supply.

Does Reolink camera work without WiFi?

Reolink WiFi cameras can work without WiFi or Internet connection.

How do I find the IP address of my Reolink camera?

Step 1. Download the free Reolink software on your phone or PC. Step 2. Come to its device settings, and then find the security camera IP address on the Network Status tab.