Why is my PS4 controller not working properly?

Common reasons your PS4 controller is not working

Here are some possible causes, according to Asurion Experts: The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.

How do I fix my PS4 controller not responding?

Why is my PS4 controller acting weird?

Your PS4 controller may be moving by itself because of a faulty calibration. If you use your PS4 controller for long enough, the calibration may become inaccurate. This can cause the thumbsticks to appear as if they are moving without any input from you. You can fix this by recalibrating your PS4 controller.

Why is my PS4 controller unresponsive sometimes?

PS4 Controller Keeps Disconnecting

First, make sure your controller battery is charged. It sounds simple, but if the battery in your controller is almost dead, it may disconnect. To check your controller battery life, hold the PS Button to bring up the Quick Menu on the left side of the screen.

Why is PS4 controller not working in game?

The PS4: the problem may be due to the PS4 connectivity. Try rebooting your console. The controller needs a reset: a hard reset may fix the problem. Bluetooth pairing: try turning off, then on again your PC's Bluetooth.

Playstation Contoller Not Connecting? Try THIS!

How do I calibrate my PS4 controller?

Press L2 and R3 to max physical distance 3 times in a row, and rotate both joysticks with max physical distance 3 times (LED will turn off). Tap the Share button once, the LED will flash Green 3 times then turn off. This means the calibration been successfully completed.

How do I reset my PS4 controller?

On the back of your controller, near the L2 shoulder button, you will see a small hole. Into that small hole, insert a paper clip or a similar tool you've got. Keep the tool inserted (which will press the reset button inside) for about five seconds. Your controller is now reset and ready to be paired with your console.

How do I fix an unresponsive controller?

If your controller doesn't pair using the buttons, try using a USB cable to pair it. Simply plug the cable into a USB port on your console and connect the other end to your controller, then hold the Xbox button on your controller for a few seconds. If this fails to solve the problem, you should restart your console.

How do you clean a PS4 controller?

Pour rubbing alcohol (also known as isopropyl alcohol) on top of the water until it reaches the halfway point. Screw the cap on tightly and gently turn the bottle upside down and back up to mix the solution. Wipe down the controller with the mixture using a microfiber towel.

Why is my PS4 controller shaking?

If your PS4 controller won't stop vibrating, go through all of the normal things like powering on and off and unpairing/re-pairing if you're using a wireless controller. If those don't work, disable vibration settings and/or reset the entire controller with common household items.

What causes controller drift?

A common reason why controllers run into drift problems is that they are prone to deterioration, which will naturally occur with use. In more recent years, the life cycle of technology has shortened dramatically to promote further purchases (yay, capitalism), thereby further exacerbating the issue.

How do you get rid of stick drift?

Apply isopropyl alcohol to a cotton swab. Pry back the thumbstick, and carefully wipe the rounded surface with alcohol. Rotate the thumbstick incrementally, carefully cleaning the entire thing. Check to make sure that you've fully cleaned the thumbstick, and test operation.

What is the white light of death on PS4?

Does your PS4 turn on and show the white light but not show anything on the TV? This is what's known as the "white light of death" or WLOD. The bad news is that your PS4 is likely broken and in need of repair.

How often should you clean your PS4 controller?

As gaming console controllers and accessories are handled the most often when gaming, try and clean these at least once a week. The best way to clean your PS4 controller, Xbox One controller or Nintendo Switch joy-con controllers is to use disinfecting wipes and give it a good rub.

Can you open a PS4 controller?

Pinch the left handle of the controller to introduce an opening. Wedge a plastic opening tool into the opening and slide it up towards the joystick. Pull down on the plier to crack open the casing. Repeat these steps for the right handle.

What is the gunk on my controller?

It seems like it is caused by sweaty palms combining with the dust and dirt in the air (unless you have a HEPA air filter, you have dirt in your house) which forms some nasty looking gunk. It is usually located in a line around where we grip the controllers as well as on the triggers and shoulder buttons.

How do you fix mushy buttons?

The first fix we recommend taking is by pressing down hard on the button that you feel mushy or sticky with your thumb. With the button held down, you should then try to move the button in a circular motion. This can be done clockwise, counterclockwise or in both directions.

Why is my R button Not Working?

It could be anything from: 1) The plastic shoulder button broke on the inside, disassemble remove the plastic R button, press the module button with your finger and see if it works, if it does work replace the plastic R button. 2) The button module broke off of it's solder joints, resolder.

Does resetting PS4 controller fix drift?

Sometimes a simple reset can get your controller working again. Unplug and turn off your DualShock controller. Find the reset button on the back of your controller near the L2 button. Use a small tool (like a paperclip) to push and hold the reset button for at least 5 seconds.

Can you update a PS4 controller?

Use a USB cable to connect your controller to your Windows PC, and then follow the on-screen instructions to start the update. Don't turn off your Windows PC or disconnect the USB cable during the update. When the update is complete, a message appears. Select [OK] to finish the process.

What does calibrating a controller do?

If your controller isn't quite working properly, you can calibrate it in Windows 10 to make sure that every movement translates to your game with 100% accuracy.

Why is my PS4 orange?

Solid Orange

Your PlayStation is in Rest Mode.

What color should PS4 light be?

The console is on and working normally. This light may appear yellow or amber to some. After a few seconds, the console light should stay solid orange. Rest mode is a low-power state when the console can charge controllers, download and install content.