Why is my Petcube Camera blinking?

In case your Petcube suddenly stopped working and the LED light on it is blinking green, it means your Petcube could have lost its setup information.

Why does my Petcube keep blinking?

Pulsing Orange — Your Petcube is connected to a wireless access point but cannot connect to the Internet because of the security settings on your network. Please make sure your router is not blocking the Petcube with a firewall, MAC address filtering or other security settings.

Why is my Petcube Camera blinking blue?

Be aware, mind your privacy! Petcube is streaming live video at the moment. Pulsing Blue (fig 9.6) — Alexa is listening. Pulsing Yellow (fig 9.7) — Your Petcube cannot connect to your Wi-Fi network because of an incorrect password.

How do I reset my Petcube Camera?

If you have Petcube Play or Petcube Bites camera, find a reset pin that came with your device, find a reset button which is located in the small hole on the bottom of your Petcube Play camera or below the USB port on the left side of the Petcube Bites camera, insert the reset pin into it, hold it down for 8 seconds ...

Why is my Petcube not connecting?

If your Petcube camera status shows as 'Disconnected' in the Petcube app, it usually means that your phone is not connected to the Internet at the moment or the network you are connected to has certain restrictions. Try switching to any other Wi-Fi network or connect to your camera using cellular data (LTE, 3G).

✅ TOP 5 Best Smart Pet Cameras [ 2022 Buyer's Guide ]

How do I reconnect my Petcube?

Power up your Petcube Play, wait 1 minute until it starts up, take a reset pin that came with your Petcube, find a small hole on the bottom of your Petcube Play, insert the reset pin into it, hold it down for 3 seconds until the light changes to pulsing green and follow the steps on your screen.

Can someone hack my Petcube?

Petcube cares deeply about security, it is our top priority to provide a safe user experience. All the connections are protected with 128-bit encryption, we use SSL protocol and a number of other security features.

What does the red light mean on my Petcube?

Fast Pulsing Green (fig 9.9) — Your Petcube is downloading the most current software update, which usually takes about 5 minutes. Steady Red (fig 9.10) — Alexa mic on your Petcube is muted.

How do I reset my Petcube password?

Is Petcube always on?

There are two modes in Petcube Care: Awake and Sleep. To change between the settings, open Petcube app, go to the camera profile in Home menu if you use Android or tap the 'Play' icon if you use iOS, move the slider to 'Sleep' or 'Awake' mode. Use Awake mode when you are not around and want Petcube Care to be active.

Why is my Petcube blinking yellow?

Petcube Camera LED is pulsing yellow and doesn't turn white after setup. This problem may occur if you have entered an incorrect password for your home Wi-Fi network during registration.

Does Petcube work without Wi-Fi?

Petcube devices have no Internet access and need to be connected to a local Wi-Fi network to work properly. Petcube requires a WiFi network and min 1Mbps upload and download speed (2Mbps is recommended).

How long does Petcube take to update?

Reminder: It is likely that your Petcube will need a firmware update right after it is connected. The firmware update will be downloaded to your camera within 24 hours. When the LED light on the Petcube will start blinking orange rapidly, do not disconnect your device. The installation only takes 5 minutes.

Does Petcube record all the time?

Remember, Petcube Care records videos to the timeline automatically by default.

How safe is Petcube?

At Petcube we deeply care about our customers' security. Our engineers continuously improve devices and services protecting your data and your peace of mind. The data transmission is performed via the proven TLS protocol with 128-bit encryption. The firmware distribution is secured via the signed updates.

Are puppy cameras a good idea?

A pet camera is a really useful tool to monitor your pet's behaviour when you are away, even if you have a pet sitter watching your pet at your place.

Can you use Petcube away from home?

Petcube lets you watch and play with your pets online. If you're an anxious pet owner, you probably spend a few minutes at least every day worrying whether your cat or dog is doing all right at home while you're away.

Why does my Petcube say its offline?

It's possible that Petcube doesn't have strong Wi-Fi connection. Keep in mind that some connection issues may be caused by poor Wi-Fi signal, which can depend on the router range, distance to the router and obstacles between Petcube and router, such as walls or radio frequency interferences.

Is Petcube waterproof?

No, Petcube Camera is not waterproof and should not be exposed to liquid, moisture, dust or excessive heat.

Does Petcube record sound?

Petcube Care captures videos when users play with their pets using the Petcube app. Recording is triggered by sound, motion, autoplay mode, and any camera activity initiated by the owner. Users will have full control over notification alerts and recording with 3 different settings - Awake, Quiet and Sleep.

How does Petcube camera work?

Petcube Camera is a Wi-Fi home camera for pet owners. It allows them to watch, talk to and play with their pets using a built-in laser pointer toy from a smartphone anytime, anywhere. Through Petcube mobile app, people can share access to their Petcube Cameras so other pet lovers can interact with their pets.

How do you talk to Petcube?

To start talking and listening, first, make sure the sound is activated in Settings at the top right, then simply tap the mic icon in the bottom left corner (fig 4.10. 1).

How do you use Petcube bites?

Playing with your Petcube Bites

To fling treats, use the bone icon in the bottom right corner of the app while in play mode, then hold down the bone icon in the middle of the screen Page 7 and swipe up to select how far you want to fling the treats: you can select close, medium and long shots.

Why can't My pet hear me on Petcube?

For the two-way audio to work, Petcube requires access to the microphone on your mobile device. To grant access to it, open the 'Settings' menu on your phone, then go to 'Privacy' and then 'Microphone,' and make sure you have allowed the Petcube app to use your phone's mic.

Is Petcube motion activated?

If you are using Petcube Care, the Petcube App will record videos triggered by motion and sound detection and you can configure push notifications to be sent as soon as new video recordings are available.