Why doesn't my speaker work on my iPhone 7?

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don't hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service.

Why is my iPhone speaker not working when calling?

If the iPhone's volume is set to its lowest level or the ringer is set to mute, then there will be very low or no sound at all during the calls. Check and adjust the volume settings to your preferred audible level. Go to Settings > Sounds > Ringer and Alerts and set the volume level.

How do I make my iPhone 7 speakers work?

Why is my call speaker not working?

Clean the speaker. Speakers get dirty or clogged, so a bit of cleaning could make sounds clear again. Before you clean the speaker, turn off the phone and remove the battery. Use a can of compressed air to blow quick bursts into the speaker.

Why is my speaker not working?

If your Android loudspeaker won't work, restart the device and check for updates. Additionally, reset the sound settings, and disable Bluetooth and Do Not Disturb mode. If the issue persists, remove the case, clean your speaker grills, enter Safe Mode, and reset your settings.

iPhone 7

Why is the speaker button greyed out on my iPhone 7?

Soft resetting the iPhone might do the trick for you whenever the iPhone speaker button greyed out issue occurs. For that, you only have to hold down the Home and the Sleep button simultaneously. Next, slide to power off. That's it!

How do I clean my iPhone 7 speakers?

There are three main ways to clean your iPhone speakers. You could use a soft-bristle toothbrush to scrub the speaker. You could use canned air to blow debris out of the speaker's nooks and crannies. Finally, you could use adhesive tape to remove the gunk trapped in or around the speaker.

Why can't I hear when I call someone on my iPhone 7?

The next method for fixing the "no audio during calls" issue is by restarting your devices. Follow the instructions to restart your iPhone 7. Press and hold the "Volume Down" and "Power" buttons simultaneously. Keep holding them until you see the Apple logo on the screen.

Are both speakers on iPhone 7 supposed to work?

So, do both speakers work on my iPhone7? The answer is yes. Here's why. The iPhone 7 has a bottom-firing speaker and a top-firing earpiece for calls.

How do you fix low speaker on iPhone?

Just below the Silent switch, you'll find the Volume buttons, which adjust sounds for videos and music in increments. This also works if you're trying to increase ringer volume. If the buttons don't change anything, go to Settings > Sounds & Haptics, then check that Change with Buttons is turned on.

How much does it cost to fix iPhone 7 speaker?

According to Puls, the cost of repairing this issue can range from $79 and $180, depending on whether they customer wants a "quick fix" or "future-proofing."

How much is it to fix the speaker on an iPhone 7 Plus?

Apple iPhone 7 Plus Earpiece Speaker Repair $79.

Can the speaker on an iPhone be repaired?

If your iPhone speaker is broken or your iPhone speaker is muffled or won't work during calls, the good news is that Apple does replace iPhone speakers both at the Genius Bar and through their mail-in repair service at their support website.

Why is speakerphone greyed out?

An inaccessible, grayed-out speakerphone icon on your iPhone 7 or 7 Plus is the most obvious issue with a faulty Audio IC. You might also see the Voice Memo app icon grayed out, or refuse to start up or record.

Why is my speaker locked iPhone?

You can check this by pressing on the Volume buttons on your iPhone or by opening Control Center and then adjusting the volume from there. Once you've adjusted both of the mute switch and the volume levels on your iPhone, try doing a test call with someone and see if you're able to enable Speaker mode during a call.

How do I turn on my iPhone speaker?

Can iPhone speakers get clogged?

An iPhone's speakers can become clogged with dirt, dust, dead skin cells, and more, reducing the quality of playback and making calls harder to hear. You can clean iPhone speakers easily with several different household objects.

Can I clean my iPhone speaker with alcohol?

Scrub a dry and clean toothbrush against the speakers or if you have rubbing alcohol laying around then dip a slight top of the toothbrush in it and then rub it on the top and bottom iPhone speakers.

How can I test my iPhone speakers?

During a call, hold your device away from your face so the screen lights up. Tap the Speaker icon in the upper-right of the grid. This will let you participate in a conversation without holding your iPhone to your ear.