Why does my diamond have a blue tint?

Some diamonds fluoresce when they are exposed to ultraviolet (UV) rays

UV) rays

Ultraviolet (UV) is a form of electromagnetic radiation with wavelength from 10 nm (with a corresponding frequency around 30 PHz) to 400 nm (750 THz), shorter than that of visible light, but longer than X-rays.

https://en.wikipedia.org › wiki › Ultraviolet

Ultraviolet - Wikipedia

from sources like the sun and fluorescent lamps. This can cause them to emit a bluish light or more rarely, a yellow or orangy light. Once the UV light source is removed, the diamond stops fluorescing.

Does a diamond have a blue tint?

Some lab-grown diamonds are blue in appearance. This is called the blue nuance, shown in the image above. Some lab diamonds even have a greenish tint, rather than a blue one. The blue nuance occurs in diamonds that are grown through the HPHT (high pressure high temperature) process.

What causes blue fluorescence in diamonds?

Fluorescence occurs in some diamonds when they are exposed to the concentrated radiation of a UV lamp. Submicroscopic structures in the diamonds cause them to emit a visible light, a fluorescence, which is commonly blue in colour.

Are diamonds supposed to shine blue?

When exposed to uv light, there will be a diamond glowing different colors. 99% of the time, the glow is blue, but on rare occasions, diamonds glow white, yellow, green, or even red in color.

How can you tell a fake diamond?

Black Light Test

To conduct the test, turn off all the lights and put your stone under the source of black light. If you're holding a genuine diamond, you'll witness an intense blue color on the diamond surface. A fake gemstone will reveal itself through other colors — including green, yellow, or gray tints.

DIAMOND FLUORESCENCE: GOOD OR BAD? And How it Helps You SAVE MONEY When Buying Diamonds!!

How should a real diamond sparkle?

The way that diamonds reflect light is unique: the inside of a real diamond should sparkle gray and white while the outside should reflect a rainbow of colors onto other surfaces. A fake diamond, on the other hand, will have rainbow colors that you can see inside the diamond as well.

Is it bad to have fluorescence in a diamond?

In most cases fluorescence is simply an identifying characteristic and not a performance characteristic, and is therefore NEITHER good nor bad. In some cases, strong or very strong fluorescence can make a diamond appear cloudy, diminishing its transparency and eye appeal.

Does diamond fluorescence affect price?

Diamond Fluorescence. Fluorescence refers to a diamond's tendency to emit a soft colored glow when subjected to ultraviolet light (such as a "black light"). Roughly 30% of diamonds fluoresce to some degree. Colorless (D-F) fluorescent diamonds sell at up to a 15% discount since the fluorescence is perceived as a defect ...

Does fluorescence make a diamond more valuable?

While fluorescence never adds value, the appearance of some fluorescence in diamonds lower in color (say J-K-L and down) can actually fool the eye into seeing a better color than its GIA color grade shows.

Do cubic zirconia look blue?

If you turn both a diamond and a CZ upside down, the bottom of a diamond will give off the entire rainbow of color reflections, whereas CZs usually have more exclusively orange and blue flashes. This is because cubic zirconias and diamonds have different refractive indexes.

What color should a diamond be under UV light?

A pure and natural diamond is known to produce a blue glow when exposed to black light. The impure ones have certain chemical impurities that trigger the glow of other colors like green, white, red, and yellow when diamonds are exposed to ultraviolet light.

What do fake diamonds look like under UV light?

Ultraviolet Light: About 30% of diamonds will glow blue under ultraviolet lights such as black light. Fake diamonds, on the other hand, will glow other colors or not at all.

Is strong blue fluorescence good?

Diamonds with very strong fluorescence are uncommon. Most diamonds with very strong fluorescence are blue. Avoid diamonds with fluorescence that makes the diamond look hazy, oily, or cloudy.

What is the most common fluorescence color in a diamond?

Though blue is the most common color for diamond fluorescence, some diamonds fluoresce a different color. Yellow is the second most common color, and it would have the opposite effect of a blue diamond during color grading.

Is faint fluorescence OK?

For nearly colorless diamonds in the G-H range, we recommend faint fluorescence at most. Faint fluorescence can have the benefit of bumping your diamond up one color grade, making your “near-colorless” diamond appear “colorless.”

How should a diamond look in sunlight?

We all love how a diamond shines in the sunlight. Test your stone by putting it in direct sunlight and examining the colors it reflects. A real diamond will reflect both rainbow colors as well as white light. If you only get one of the two, then the diamond isn't real.

Why do some of my diamonds glow under UV light?

Diamonds glow in black lighting due to a phenomenon called fluorescence and roughly 35% of natural diamonds exhibit some degree of this effect. In nature, the presence of certain chemical impurities within the diamond's composition triggers this glowing effect in the presence of an ultraviolet light source.

Are cloudy diamonds worth anything?

Cloudy diamond prices are usually lower than non-cloudy diamonds. Because a clear, brilliant diamond will be more eye-catching, a cloudy diamond is priced lower. In our eyes, the lower price of a noticeably cloudy diamond is not worth it.

Do Tiffany diamonds have fluorescence?

Additionally, the Tiffany Gemological Laboratory will not accept stones exhibiting strong or excessive fluorescence, which, in natural lighting, can give diamonds a milky appearance.

How do you tell if a diamond is real with a flashlight?

Simply hold the loose diamond near a light source, like a lamp, and see the reflection of the light from the diamond. This test will be best if there is another gem that you'll compare along with it, like cubic zirconia. You'll see how different their effects are to light.

How can you tell difference between diamond and cubic zirconia?

The best way to tell a cubic zirconia from a diamond is to look at the stones under natural light: a diamond gives off more white light (brilliance) while a cubic zirconia gives off a noticeable rainbow of colored light (excessive light dispersion).

Do real diamonds fog up?

Does it Fog Up? The easiest at-home test is to breathe on your stone. If your stone fogs up quite a bit and takes time for the condensation to evaporate, then it is most likely fake. Real diamonds do fog up, but only a little and the condensation evaporates quickly.

Do diamonds lose their sparkle?

Known to be the toughest natural substance on the Earth, diamonds can cut any rock or metal; yet only a diamond can cut another diamond. Despite its ruggedness, diamond can lose its sparkle with oil or dust deposited on it. To maintain the sparkling of this indestructible gemstone is a tough job, but a possible one!

Do lab made diamonds have fluorescence?

As a final note on fluorescence, lab-grown diamonds (other than fancy color lab-grown diamonds) never have fluorescence. We think in time this fact could make fluorescence in a natural diamond a more desirable and valuable trait since it serves as a natural differentiator to lab-grown diamonds.

How can you tell if a diamond is real at home?

This one's easy: Get a glass and fill it with water (it doesn't matter what type of water you use). Drop the diamond into the glass of water. Due to the high density of diamond, when dropped into water a real diamond will sink. If the diamond floats to the top or middle of the glass, it's fake.