Why does Armed Stay say exit now?

The alarm system says “exit now” when armed in stay mode because the exit delay occurs no matter which arming mode you are using. When arming your alarm control panel in stay mode, your system will activate with the exception of the motion detectors.

What does Armed stay mean on ADT?

ARM-STAY: Use this mode for securing your house while you are home. ARM-STAY will provide you with an Exit Delay and an Entry Delay and is designed to ignore motion sensors, and other specific sensors not set for Stay mode. During the Exit Delay, the beep will get faster during the last 10 seconds of arming.

What does exit delay in progress mean ADT?

The exit delay in progress is displayed on the keypads. ... The exit is delayed for 10 seconds. 3. The entry/exit door should not be used to exit the premises. The system automatically ignores the Stay/Away zones if you tell it that you are staying.

What is the difference between armed stay and Armed away ADT?

STAY is used to arm the system with people or pets inside the premises. The perimeter sensors will be armed, however interior sensors will be left unarmed. AWAY is used when no one will remain inside the premises. The entire system (interior and perimeter) will be armed and interior movement will trigger an alarm.

What is stay mode on alarm?

Stay Mode. Many people think you have to fully disarm your security system when you're in the house, but Stay mode ensures you never have to sacrifice peace of mind. When set to Stay, your security system simply deactivates motion detectors, leaving the rest of your sensors active and primed for alert.

Armed Away - Exit Now

What is the difference between stay and night stay?

Stay vs. Night. Briefly, the stay setting is to be used during the daytime, while you're staying in your home. The night setting, while also to be used when you're in the home, is to be used at night time when your movement is more limited.

What does Armed Stay Instant mean?

The difference between Arm Stay and Arm Instant is that the system will ignore all Entry Delay settings when it is set to Arm Instant. In other words, any zone that would normally trigger an Entry Delay countdown will instead cause an instant system alarm.

How do I turn off armed stay ADT?

To arm the system in the AWAY, STAY, INSTANT or MAX mode, enter your user code and press the numeric key above the selected mode. To disarm the system enter your user code + OFF key [1].

What does Armed stay mean Xfinity?

Arm Stay is for when you are at home and awake. Security features are activated as in Arm Away, but Motion Sensors are not (so you don't trip the alarm while you're in the house). Exit Delay for Arm Stay.

How long is ADT exit delay?

Exit delay

This feature gives you time to leave your home before the system is armed into Stay or Away mode. You can select a delay time of 45 seconds, 60 seconds, 90 seconds, 120 seconds, or 240 seconds.

What does exit delay mean?

Exit Delay setting is the amount of time between when you set your system to Away mode and when the system is armed. This is also useful for things like front doors so that you have time to leave your home and shut the door behind you without the alarm going off.

How does ADT stay mode work?

STAY Mode:

This gives you perimeter protection with free roam of your home because in STAY Mode your motion sensors will not be armed. But if someone breaks through a sensored door or window or breaks through a glass door or window in a room protected by a glass break sensor your alarm will go off.

What's the difference between stay and away on an alarm?

Armed Stay is the arming mode you should use when remaining in your home, such as at night when sleeping. Armed Away is the arming mode you should use when leaving the home.

What is stay mode?

What is the Stay Armed mode? Use the stay function on the keypad when you plan on staying home. When your alarm is in stay mode all the interior zones, such as the motion detectors, will be circumvented. This means the alarm won't be triggered should you get up in the middle of the night for a glass of water.

Should you set your house alarm at night?

As well as when you are leaving the house (even if it's for a couple of minutes), we also highly recommend for people to use the night setting every night. Just as you are going around, checking if all windows and doors are locked each night, add switching your burglar alarm to your routine.

What does night arming mean?

Night Arming option is to arm some of the interior motion and deactivate other motion sensors. This is an Arm (Stay) only option. Example: Arm downstairs motion and leave upstairs motion unarmed when you are sleeping at night.

What does home and Armed mean?

Home Mode is designed to be used when you or your employees have locked the doors and are working late, and need to feel secure inside the business. Arming your Ring Alarm in Home Mode will arm only the Contact Sensors around the perimeter of your business while ignoring Motion Detectors inside by default.

How do I reset my ADT system?

The security system may need to be reset by entering your code into your system and hitting off twice. Remember to remove the system from Test Mode. Go to MyADT.com and click on My Alarm from the System Management option, select Stop Test to remove the system from test mode and restore operations.

What does Armed stay mean Telus?

Arm your system

Stay: Arming your system in Stay mode only arms the system perimeter only and is typically used during the night when occupants are sleeping. Away: Arming your system in Away mode arms all the sensors attached to your alarm system and is typically used when occupants are out of the home.

What is the difference between ARM night and arm stay?

Arm Night is exactly the same as Arm Stay. The only difference is that any Interior Zones with the Arm Night setting enabled will not be bypassed when the system is set to Arm Night mode. Please note that you will only see the Arm Night option if you have at least one sensor with the Arm Night option enabled.

What is armed stay on vivint?

Stay Mode is used for arming the system after everyone is inside and no one is expected to enter or leave. When the system is armed in Stay Mode, you can move about your home without triggering the home security alarm. All the interior protection is off.

What is ADT force bypass?

"Forced Bypass", when enabled, will bypass all open burglary zones, and make the system ready for arming. Once the forced bypass has been performed the system can then be armed.

What does a night stay Mean?

a stay (at a hotel, someone's house, etc) lasting one night.