Why do you brush Pebble Tec?

Brushing a Pebble Tec surface is also very important, especially during the first few weeks after application, but also afterwards, to keep dirt and algae from building up on the slightly irregular surface. Be sure to use only a nylon pool brush, never use a steel bristled pool brush on a Pebble Tec surface.

How often should I brush my Pebble Tec pool?

DO. brush your pool. It is recommended that you brush a PTI pool finish three times a day for the first three days and two times a day for the next ten days. Using a standard, nylon (very important) bristled pool brush.

Why do you have to brush new pool plaster?

Brush the pool twice a day for the first two weeks. This opens the pores of the plaster to allow proper curing as well as removes any loose plaster dust from the surface. You may notice plaster dusting when you brush and the water becomes cloudy. This is normal and will go away with proper treatment and brushing.

How do you maintain a Pebble Tec?

Do you have to brush Pebble Sheen?

Brushing a Pebble Tec surface is also very important, especially during the first few weeks after application, but also afterwards, to keep dirt and algae from building up on the slightly irregular surface.

How to: Brushing

Is it OK to leave a Pebble Tec pool empty?

Does my pool need to be drained before cleaning pool tile or cleaning pebble-tec? No! - We lower your pool water just enough to expose all the pool tile calcium and pebble-tec calcium. In an effort to conserve water, We Never Need to Drain Your Pool.

Why do I have to brush my new pool?

Brush after Adding Chemicals: Many powdered or granular pool chemicals don't dissolve right away when added to the pool water. Brushing helps dissolve and disperse the chemicals so that they aren't able to stain, scale, or etch the interior surface.

How soon can you swim in a new pool with Pebble Tec?

They usually do an Acid startup on Pebble finishes which takes about 7 days. Thats tough...they usually don't want you swimming in it for the first week. Also, don't know how large your pool is, but it could take 2 days or more to fill the pool up you know.

Should I brush pool before shocking?

Before you start pouring shock in the pool, the first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the skin and allows the pool shock to more easily kill the algae. Once you've done this, it is important to make sure you have the proper pH level in your water.

How long do you have to brush a pool?

BRUSHING THE POOL

It is recommended that the pool be brushed with a standard 18-inch nylon bristle pool brush at least twice per week. The entire process usually only takes 10 minutes and is well worth the time and effort.

How long does it take for Pebble Tec to harden?

Pebble Tec Explained

The very top layer of cement is then hosed away to expose the pebbles, and the pool is left to cure for about 24 hours. After that, the surface is acid rinsed and treated to bring out the pebbles' brightness.

How long does pool Pebble Tec last?

How Long Will Pebble Tec Last? Traditional pool resurfacing materials require a high level of maintenance and will only last 5-10 years before it needs to be replaced. We generally would expect a Pebble Tec surface to last upwards of 20 years with proper maintenance.

Can you shock a Pebble Tec pool?

Make sure you're keeping the alkalinity and calcium hardness in balance, and use a shock that's made of calcium hypochlorite. Liquid shock will work but it'll throw your pH to the moon, requiring the use of acid to lower it, which will tank your alkalinity, which will hurt the pebbletec.

How do I clean my pebble tech?

Skim large debris out of your Pebble Tec pool regularly to keep the water clean. A buildup of debris can disrupt the chemical balance within the pool. Keep stains from forming on the pebble finish of your Pebble Tec pool by using a pool stain remover.

Can you use pumice stone on Pebble Tec?

Yes you can. However we don't recommend using pumice stones. Cleaning with a pumice stone takes a lot of time and effort. Depending on the amount of calcium build up this could take hours and hours over several weekends.

What is better than PebbleTec?

River rok is good alternative, stones are somewhat smaller and smoother than pebble tec. Can also custom the colors to your liking.

Can you swim in a pool just filled?

Chlorine/non-chlorine chemicals – When adding chlorine or non-chlorine chemicals to “shock” your pool after a fill-up, wait about 24 hours or until levels are approximately 5 ppm. If you'll only be adding liquid chlorine, it's generally safe to swim after about 4 hours or until levels are 5 ppm or lower.

Does PebbleTec hurt your feet?

Cons of Pebble Pool Surfaces

Pebble pool finishes are generally pricier than plaster finishing, and it is true that pebble pool surfaces can be a bit rough on feet if not installed correctly.

What happens if you dont brush your pool?

If you don't brush your pool regularly, algae will start growing on the surface. Chemicals can avoid a lot of algal growth, but you'd need dangerous amounts to curtail the spread of algae entirely. Brushing also prevents scale buildup on your pool's surface.

Should you brush a pool every day?

It is important to brush you pool daily. This can be time consuming so if necessary, alternate two walls one day, the other two the next day, and the floor the next day. This way, your whole pool is getting brushed almost two full times per week.

What does brushing a pool mean?

Brushing helps to dissolve and disperse the chemicals so they won't etch, stain or scale the surface. Stain or Algae Removal: Stains and algae cannot be removed by mere pool chemicals alone, there must be some physical persuasion.

Can you pressure wash Pebble Tec?

As with any pool, a Pebble Tec pool needs to be drained before you clean it. Once drained, take the opportunity to survey it carefully for loose pebbles or cracked spots. You'll be pressure washing the Pebble Tec pool on very low pressure, so you'll need to use soap to loosen up the dirt before you start.

How do you clean a pebble pool?

Does Pebble Sheen fade?

Pebble Tec's high quality color won't fade and does not stain easily. You have 4 great textures to choose from, each with their own unique & distinct colors (Pebble Tec, Pebble Sheen, Pebble Fina, and Bead Crete).