Why do I slice my driver but not my 3 wood?

There are many reasons for it, but the most frequent problem is that your clubface is not lined up on the target line and your swing path is from out-to-in. Your driver swing differs vastly from other clubs and you aim to hit the ball on the up. The arc is also much wider, and the swing builds up more speed.

Why can't I hit my driver further than my 3 wood?

Players who hit their 3- or 5-wood as far or longer than their driver are typically using too little loft with the driver for their clubhead speed. You know, it's a funny thing with the driver and its loft compared to the other clubs in the bag.

Why do you only slice a driver?

The main reason that a driver will slice, but not the irons, is the length of the club. With a golf driver being longer than a golf iron, it is much harder to square the club face and release the club at the proper time. Golfers of all ability levels struggle with this concept.

Do you hit a 3 wood the same as a driver?

However the surprisingly thing is that overall, the accuracy with Driver or 3 wood is much the same, both with an average of 47%. To be specific; Driver = 46.6% and 3 wood = 47.4% so there is a 0.8% difference between the 2 clubs. This may come as a surprise to most golfers.

Is a 3 wood more accurate than a driver?

3 woods have a lot more loft than a driver and that should eliminate this problem for you and is one of the reasons why so many people are hitting their 3 wood more accurately and even further than they are their driver.

SLICE DRIVER IRONS STRAIGHT, SIMPLE FIX

How far does an average golfer hit a 3 wood?

How Far Should You Hit Your 3 Wood? On average, recreational golfers hit their 3 wood 224 yards, but the range will typically vary between 210-250 yards. The distance you hit the ball will depend on your skill level, the weather, and whether or not you're using a tee.

Why do I only slice my 3 wood?

The cause of a slice with a fairway wood is no different than it is with any other club in the bag. If the ball is curving badly to the right (for a right-handed golfer) as it flies, you are making contact with the club face open relative to the swing path.

Why do I pop up my 3 wood off the tee?

That means teeing the ball so half of it is visible over the crown, or top, of the club head. Teeing the ball too high can result in swinging under it, causing the ball to pop up.

Does higher loft reduce slice?

Although many slicers want to hit the ball lower, remember the additional loft provides backspin that will reduce the amount a golf ball slices through the air.

How do I stop slicing my driver?

Why does my driver go same distance as 3 wood?

Hitting your 3-wood or 5-wood about the same distance or even a little longer than your driver is a very strong indication that your driver does not match to your Clubhead Speed and your Angle of Attack into the ball.

Why do I hit 3 wood better than driver?

A three-wood imparts significantly more backspin, which will help with accuracy most of the time, and it also helps with workability control. The ball is teed much closer to the ground with a three-wood, so the variability of turf interaction does come into play.

Why can't I hit my 3 wood off the fairway?

The 3-wood is hard to hit for a few reasons, namely: it has a long shaft but a small clubhead, leaving little room for error; it looks vastly different to an iron at address which can create anxiety in amateur players; and it doesn't drive through the turf as easily as a short iron when played from the fairway.

How high should you tee up a 3 wood?

3-wood and hybrids:

To achieve this sweep, golfers should leave one-half to one-third of the ball above the crown of the club for their 3-wood with the tee sitting about half an inch above the ground. For hybrids and other fairway woods one-third to one-quarter of the ball above the crown is ideal.

Why can't I hit my fairway woods?

Why? Because the fairways of today are typically very short grass, so in order to hit a truly solid fairway wood, you need to hit the ground and maybe even make a divot. If your ball position is too far forward, like a driver, you may hit the ground before the ball, costing you good contact and distance.

What club does a 3 wood replace?

What Iron Does A 3 Wood Replace? The 3 wood replaces the 1 and 2 iron in terms of loft degrees. However, the distance, ball flight, control, and accuracy of a 3 wood is easier to achieve than using these irons. These irons are notoriously difficult to hit and even Professional golfers rarely carry these irons.

Why do I hit my 5 wood farther than my 3 wood?

One of the reasons that people find 3 and 5 woods easier to hit than drivers is that they are shorter in length. The 3 wood has a shaft length of between 42 and 43 inches whilst the 5 wood is a little shorter again at between 41 and 42 inches.

Why do I struggle to hit my driver?

The main reason why you can't hit your golf drive anymore is because your gripping the shaft too tight, not having enough swing speed, or your using the wrong golf club. There are many possible reasons why you can't hit your driver as well as you did before. You may be: Holding your driver with a grip that's too tight.