Why do I slice my drive but not my irons?

The main reason that a driver will slice, but not the irons, is the length of the club. With a golf driver being longer than a golf iron, it is much harder to square the club face and release the club at the proper time. Golfers of all ability levels struggle with this concept.

Can you hit irons but slice a driver?

Incorrect Stance

The general problem with a slice is that your stance is too open. This means that your leading foot is behind the trailing foot when facing the target. To exacerbate this, golfers tend to open their stance aiming further left and increasing the angle of the out-to-in swing path.

Why do I always slice my driver?

A slice shot is caused by a poor grip and setup, an outside-to-in downswing path and an open clubface. An outside-to-in path occurs when the golfer reaches too far on the downside, bringing the club down to the right of the ball (outside), relative to the target line.

Why do I slice my driver but not my woods?

Hitting a slice is the most common fault experienced by golfers at all levels although more manageable by professional golfers. There are many reasons for it, but the most frequent problem is that your clubface is not lined up on the target line and your swing path is from out-to-in.

What causes a golf drive to slice?

A slice happens when a sidespin is put on the ball, causing it to curve to the right for a right-handed player and to the left for a left-handed player. Sidespin to the right is caused when the clubface is open (pointed right) relative to the path the club is traveling as the club impacts the ball.

Why Do I Hit My Irons Straight But Slice My Driver

How do I stop slicing my drive?

Does a strong grip cause a slice?

The ball will always leave the clubface, at a right angle to the clubface, regardless of the path the club is swung on unless there is enough time and force to alter what's known as the Venturi Effect. 2. A strong grip eliminates a slice.

Does higher loft reduce slice?

A higher driver loft can help a slice because it will help to encourage a bit more forgiveness and backspin on the driver. These features of a higher lofted driver are going to help improve a slice and straighten out overall ball flight. A slice is often caused by a bit too much side spin being applied to a golf ball.

Does lower loft driver increase slice?

Although many slicers want to hit the ball lower, remember the additional loft provides backspin that will reduce the amount a golf ball slices through the air. I would recommend a 10.5 to 12-degree set-up, depending on your current ball flight and severity of your slice.

Why can't I hit my driver straight?

The main reason why you can't hit your golf drive anymore is because your gripping the shaft too tight, not having enough swing speed, or your using the wrong golf club. There are many possible reasons why you can't hit your driver as well as you did before. You may be: Holding your driver with a grip that's too tight.

Why am I not getting loft on my irons?

If your shots are too low, there must be a flaw in your impact position. At impact, the shaft of the club must not lean too far forward (toward the target) or too far back (away from the target). Every degree that the shaft leans toward the target reduces the loft by the same amount.

Will a regular flex shaft help my slice?

Try a more flexible shaft, when a shaft is too stiff the clubface struggles to turn back to square, which will present the clubface open at impact, causing the ball to slice. The more flexible the shaft is the easier it is to turn the clubhead over at impact.

How do I know if my driver shaft is too soft?

Does draw setting help slice?

In my experience, an adjustable driver will NOT fix your slice. I had a slice with my driver and nothing changed when I switched to an adjustable with a draw bias. Sure, it can help a little but you'll end up with a very similar result. The only thing that's going to fix your slice is to change your swing.

Can a new driver fix a slice?

Check out our article on How to Stop Slicing, or if you don't have time to practice and need a quick fix… Buy a new driver that yields a draw or minimize the slice. The average golfer can call on today's new line of drivers in 2020 to help control their slice.

What drivers help with slice?

What is the most common cause of a slice in golf?

The most common cause of a slice is an open club face. This open club face will give you contact that isn't square and often feels like a “side swipe.” The most common cause of an open club face is an incorrect grip as your hand position will directly reflect in the face.

How do I know if my golf grips are too strong?

While in the address position, count how many knuckles you can see on your left hand. If you can see three knuckles or more on your left hand, you have a strong left hand golf grip.

Why do I slice my driver when I swing hard?

A common cause of a slice is that the golfer is swinging the club too fast. Swinging the club harder will not necessarily result in greater distance off the tee, but it does usually result in a slice. In a fast swing, the arms come through the ball before the body weight can be shifted into the swing.

Why am I pulling my driver left?

If it's a pull, there are two likely reasons why the ball is starting left: 1) your body and clubface are aimed left of the target at address, which promotes an out-to-in path; or 2) you're aiming properly but the clubface is closed too much at the point of contact.

What happens if shaft flex is too stiff?

The shaft will flex during a swing, which changes the position of the club head. When you select the right flex, the club face will be square on the ball improving accuracy. If the shaft flex is too stiff, you lose loft and won't control your shots easily.

Can too stiff of a shaft cause a slice?

If your golf shaft is too stiff and your swing speed is too slow, your well-struck shot will be limited on both carry distance and shot trajectory; a too-stiff golf shaft will most often lead to weak fades or slices.