Why do clipper blades get dull?

In addition to the condition of the coat, clipper blades can go dull if they are exposed to extreme changes in temperature. When a metal clipper blade heats up during use, the metal expands. When the blade cools down, the metal contracts.

How do you fix dull hair clippers?

To sharpen hair clippers, remove the blade from the clippers and run it along a 4000 grit coarse honing stone, which you can get at a home improvement or hardware store. Angle the blade and move it forward across the stone about 10 times until it's shiny and even. Turn the blade over and repeat on the other edge.

How long should clipper blades last?

If you are finding the clipper blade is snagging and tugging at the coat, it is time for it to be re-sharpened. A rule of thumb, if you are cleaning and oiling your blades frequently, then a dog blade will last between 10 -12 weeks based on clipping 5 dogs per day.

How often should clipper blades be sharpened?

Normally if the coat is clean, a set of blades should manage up to about five clips, but generally speaking two to three is average. If this is the case, it is best to send them away for re-sharpening. It is money well spent to use sharp blades.

Do Wahl clippers need sharpening?

It is recommended to clean and sharpen your clipper every 3 or 4 uses.

Why do clipper blades go dull?

How often should you oil your clippers?

Oiling your clippers will help to reduce friction that can wear down the blade, prevent your clippers from overheating and help to keep them sharper longer. While you do not have to oil your clipper blades after every use, you should get into the routine of oiling them every 2 uses.

How do you know you need new clippers?

If your clipper blades are still pulling the hair, you will need to replace your blades or alternatively have them sharpened.

How do you know when to change your clipper blades?

Can you sharpen clipper blades with sandpaper?

You can save yourself some cash by learning how to sharpen clipper blades with sandpaper. This is the easiest method, as you're sure to have sandpaper within reach all the time. But there are many ways to bring blunt blades back in good working order.

Where do you put oil on hair clippers?

Oiling the blades reduces friction and keeps the clippers from pulling and snagging as you cut your hair. A drop of oil at the corners of the blade's top, as well as the foot of the blade, is all it takes. After you apply the drops of oil, turn the clipper on to help work the oil in.

Why are my Wahl clippers not cutting?

Remove the blade from the clipper. Use a small cleaning brush to get any loose hair that may have accumulated between the blade and clipper. You may also use a pipe cleaner or index card to clean between the teeth of the blade. Next, you should oil your blade regularly.

Why are my clippers leaving lines?

Tram Lines are caused by the cutter on your clipper head, not being moved far enough from side to side over the comb half of the blade, to complete the cut. It occurs most frequently on blades where the teeth are further apart (Numbers 7, 5, 4, & 3).

What happens if you don't oil your clippers?

When in use, you clippers produce a lot of friction. The heat this produces can damage them if oil is not used to keep them well lubricated. You will likely hear them rattle and the blades won't cut as smoothly as they should – eventually, they might even seize up completely.

Can I use WD40 on my hair clippers?

No, WD40 cannot be used to replace clipper blade oil. It is very thin and will evaporate too quickly. It can also easily get into the clipper housing, which can thin the grease inside the clipper, causing problems. Only use oil, coolants, sprays or dips formulated specifically for dog clippers.

What happens if you don't clean your clippers?

They won't cut properly and you'll get painful, patchy haircuts. In addition, if you don't clean them frequently, they'll also get dirty. This will cause skin irritation (red spots, bumps) and might even infect your skin. As a professional, there is no excuse for having a dirty shop or equipment.

What kind of oil do you use for hair clippers?

A hair clipper expert on Quora says that any lightweight carrier oil will get the job done. Make sure it can withstand high temperatures--the blades create a friction that causes heat. They suggest using a generic olive oil brand (it doesn't have to be extra virgin).

Can you clean clippers with alcohol?

Clipper blade washes usually disinfect. But if the product isn't formulated to disinfect, take some extra steps with a little alcohol: Clean out the dish or pull out a new one, and then pour some alcohol in it. Submerge your blades, wait about 10-20 seconds, then remove to dry with a soft, microfiber cloth.

Why are my clippers so sharp?

With repeated use over time coarse hair can cause blade tips to become very sharp and pointy. Skip tooth blades are very prone to being “sharpened” by coarse hair. Careful! They can literally make slices in the animals skin if they are sharp enough.

Why won't my new clipper blades cut?

Loosen your taper lever. Align your blades to be “almost” parallel to each other; ensuring the stationary blade sits a bit higher than the cutting blade. Set your taper lever to the closed position. Use your left hand to hold the blades together while you tighten them.