Who has the authority to inspect scaffolds?

OSHA requires a “competent person” to inspect scaffolds.

According to the agency, a competent person is one who: Has been trained to understand the requirements of OSHA's scaffold standards (29 CFR 1910.28 for general industry and 29 CFR 1926.451 for the construction industry) Is capable of identifying scaffold hazards.

Who is responsible for inspecting a scaffold OSHA?

OSHA requires the general contractor in section 1926.451(f)(3) to have scaffolds and scaffold components inspected for visible defects by a competent person prior to each work shift and after any occurrence which could affect a scaffold's structural integrity.

Who is authorized to inspect a scaffold quizlet?

A competent person inspects the scaffold before the start of each work shift.

Who is responsible for inspecting the scaffold and its components?

Answer: When doing construction, 1926.451(f)(3) requires that a competent person inspect the scaffold and its components before each work shift and after any occurrence which could affect the structural integrity of the scaffold.

Who is scaffolding inspector?

A person who has been on a CISRS Basic Scaffold Inspection Training Scheme Course SITS would be deemed competent to inspect a basic scaffold structure provided their employer can demonstrate they have the necessary knowledge and experience and they have passed the knowledge test at the end of the course.

How To Inspect Scaffold || Scaffolding Inspection || Scaffold Inspection in Hindi || HSE STUDY GUIDE

Who is responsible for scaffolding?

The responsibility for ensuring that the scaffolding itself is safe rests with the scaffolding company, who should also undertake regular safety checks, but it is the construction company's responsibility, and the individual user's responsibility to ensure that it is used safely.

How often does scaffolding need to be inspected?

A scaffold used for construction should be inspected before it is used for the first time and then every 7 days, until it is removed. It should also be inspected each time it is exposed to conditions likely to cause deterioration eg following adverse weather conditions or following substantial alteration.

Who is the authorized person to check the scaffolding after modification?

Competent person: one who through training and/or experience a) is knowledgeable of applicable scaffolding regulations; b) is capable of identifying existing and predictable hazards related to the erection, alteration, dismantlement, storage, and inspection of scaffolding; and c) has the authority to take prompt ...

What does OSHA say about scaffolding?

All suspension scaffolds must be tied or otherwise secured to prevent them from swaying, as determined by a competent person. [29 CFR 1926.451(d)(18)] Guardrails, a personal fall-arrest system, or both must protect each employee more than 10 feet (3.1 m) above a lower level from falling.

What are scaffolders responsibilities?

Day-to-day tasks

put up scaffolding poles and attach horizontal tubes to them. fix scaffolding to a building. lay planks across scaffolding for workers to walk on. fix guard rails and safety nets.

What do you inspect in scaffolding?

Check legs, posts, frames and uprights to see if they are on baseplates and mudsills. Check metal components for bends, cracks, holes, rust, welding splatter, pits, broken welds, and non-compati- ble parts. Check for safe access. Do not use the crossbraces as a ladder for access or exit.

Who must inspect scaffolds scaffold components and personal fall protection equipment before each use?

scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity." You ask two questions regarding the competent person requirement.

Who must supervise scaffolds?

A competent person qualified in scaffold erection, moving, dismantling or alteration is required to supervise and direct all scaffold erection, moving, alteration or dismantling activities. 1) Such activities are to be performed only by trained and experienced employees selected by the competent person.

Who is responsible for site inspection?

Building control inspections are carried out to verify compliance with the building regulations. These can be carried out by a local authority building control inspector or by an approved inspector.

Who is responsible for the safety inspection at the workplace?

Inspections in the workplace are usually carried out by: health and safety representatives. work health and safety practitioners.

Who is responsible for identifying scaffold hazards and correcting problems?

An OSHA "competent person" is defined as "one who is capable of identifying existing and predictable hazards in the surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to eliminate them" [29 CFR 1926.32(f)].

What is the law on scaffolding?

Scaffolds must be designed, erected, altered and dismantled only by competent people and the work should be carried out under the direction of a competent supervisor. All scaffolding must be erected, dismantled and altered in a safe manner.

Does OSHA inspect lumber for scaffolding?

OSHA does not inspect lumber; therefore, any scaffold planking stamped "OSHA Approved" is, at best, misleading, and should not be assumed to meet the standard on the basis of that stamp alone. An inspection agency can claim that its product meets OSHA requirements.

What are 5 requirements for scaffolding?

When the scaffolding must be inspected by a competent person?

Final inspection of the scaffold prior to initial occupation for use. At a minimum, daily inspection and documentation of the condition of the scaffold and its ability to be occupied safely. Inspections of scaffolds after changes / alterations have been made.

Does OSHA require scaffold inspection tags?

Presently, there is no requirement that warning tags be placed on all scaffolds while they are being erected. Although there are instances where such tags are appropriate and a citation under 29 CFR 1926.200(h)(1) could be issued, there are also many instances where such would not be appropriate.

Who is tasked to inspect rigging on suspension scaffolds before each shift and after any occurrence that could affect structural integrity?

All suspended scaffolds shall be designed and inspected by a structural engineer if site fabricated. 2.2.

What are 3 requirements for being on a scaffold?

The proper use of the scaffold, and the proper handling of materials on the scaffold; The maximum intended load and the load-carrying capacities of the scaffolds used; and. Other pertinent requirements of the standard.

What OSHA regulations cover the use of scaffolding?

The Safety and Health Regulations for Construction were subsequently redesignated as 29 CFR part 1926. Standards addressing scaffolds, §§1926.451 and 1926.452, were adopted in subpart L of part 1926 as OSHA standards as part of this process.

How do I become a scaffolding inspector?