Who built the first 383 stroker?

The 383 small-block we all know and love today? Thank Joe. As far as it's known, he fathered the 383 back in the late 1970s, and it would go on to become an overwhelmingly popular combination: stuff a factory 400ci 3.75-inch-stroke small-block crank into a notched-for-clearance 0.030-over 350.

Did GM make a 383 motor?

Unlike other hot rod engines that are produced every year in normal quantities for car use, the Chevrolet 383 Stroker was never actually created by the manufacturer for it to be used. Chevy 350 engines use the same crankshaft as Chevy 400 engines but utilize modified nuts that increase stroke and displacement.

What Chevy had the 383 stroker?

This engine was used for the very first Chevy Nova and Chevy Camaro in 1903, as well as for almost all classic Chevy cars. Invented by Inventor Claude Moffet in 1980, the Chevrolet 383 Stroker is one of the newest models in Chevrolet's lineup.

How much HP can a 383 stroker handle?

The ZZ383 Performance engine has more than 400hp and over 450 ft-pounds of Torque. The 383 stroker engines have been reported to achieve 330 horsepower with 410 foot-pounds of Torque, 395 horsepower with 410 foot-pounds of Torque and 395 horsepower with 410 foot-pounds of Torque.

Can you turn a 350 into a 383 stroker?

The biggest advantage to putting a crankshaft from a Chevy 400 into a 350 block to produce 383 cubic inches is that more displacement equals more power. Also, the longer crank throw produces more downward thrust, which translates into torque. And torque is what we're after, especially in a truck.

383 Small Block Chevy Engine

What is a 377 stroker?

The 377 which is listed as a 6.2L engine is a 350 block that has a . 25 inch longer piston stroke which gives it the larger displacement. The 383 stroker is also a 350 block but it has been bored and larger pistons installed. Grog , 09-16-2019 07:28 AM. Originally Posted by gator1.

How many liters is a 383?

How Many Litres Does A 383 Dodge Have? 383 liters in 6 cylinders gave birth to the RB (raised B), which debuted 12 months after the launch of its B series counterparts. A capacity of 3.0 L (6.16 M) and a capacity of 413 cu d (63.16 M). They are 8 l (liters) displacements.

What makes a 383 small-block Chevy?

The creation of the Chevrolet 383 Stroker was born out of creativity. The engine is essentially a Chevy 350 block, but uses a modified crankshaft from the Chevy 400 for increased stroke and as a result increased displacement.

What vehicle came with a 383 engine?

The 383 engine came to the Dodge Coronets, Polaras, and Plymouth Furys and Belvederes owned by law enforcement agencies from 1967 to 1971. Depending on what edition of the 383 is purchased, it can have a 290- or 325-horsepower rating.

How fast is a 383 stroker?

A 383 has the same piston speed at 2,500 rpm that a 350 has at 3,100 rpm. The increased speed allows the piston to act on the quench area of the combustion chamber at a higher rate of speed, increasing the combustion chamber efficiency.

Is a Chrysler 383 a big block?

The 383 Chrysler B engine is known as the Mopar big block that nobody loves. Typically, gearheads favor its beefier big brother, the 440. The 383 B is characterized by its large cylinder bore of 4.25 inches with a short stroke of 3.375.

What are the benefits of a stroker motor?

A stroker is an engine that has been modified to increase the length of the stroke and therefore has a greater engine capacity. Its benefits are improved torque and power.

Is a 383 a good motor?

Is 383 A Good Engine? A 383 is a great engine for many reasons, and it can perform well in some situations, without costing much, but still has plenty of power. Its performance is at least 400hp and it weighs significantly less than a normal car.

How much is a 383 stroker motor?

The HP94 Chevy 383ci stroker from ATK is being offered by Jegs at the low price of $3,993.99, but is found throughout a range of big-box stores, so it might pay to shop around some, as is the case with any large-volume crate engine commodity like a Chevy 383ci stroker.

How many liters is a Chevy 572?

A 572-cubic-inch (9.4-liter) big block V-8 is available, along with two small block V-8s, a 580-hp 350-cubic-inch (5.7-liter) unit and a 470-hp 427-cubic-inch (7.0-liter) motor.

How many liters is a 454?

For many years the 454 (7.4-liter) V8 was the top choice from GM, while Ford had the mighty 460 (7.5-liter) V8.

What liter is a 427?

The highly successful and versatile 427 cu in (7.0 L) version of the Mark IV engine was introduced in 1966 as a production engine option for full-sized Chevrolets and Corvettes.

How much horsepower does a 377 stroker make?

CHEVY TURN KEY SBC 377 STAGE 2.3 DART BLOCK, CRATE MOTOR 530 hp.

How much horsepower does a 377 make?

See all 26 photos Even with four 58mm Weber carbs, the 377 only produced 485 horsepower. Had the cylinder heads been better developed, ported and polished, the output could have been much higher.

What is a Chevy 350 bored 30 over?

The cubic inch capacity of a 030″ over 350 is actually 355, and at 1 HP per cubic inch, we would get 355 HP from the unit.

What is a SBC 350 bored 40 over?

A stock 350 bore is 4.000″ A “40 over” block has a 4.040″ bore and displaces around 357 or 358 cubic inches.

How much do you bore a 350 to make a 383?

A 0.030-over 350 block, plus the 3.750-inch stroke from a 400 small-block (versus the 350's 3.480-inch stroke) equals 383 cubic inches.

Can a 383 stroker make 600hp?

It can't be done. You just can't make a lot of power with cheap cast-iron heads. Certainly you can't make 600 hp out of a 383 with them. And for sure you can't do it without a bunch of compression.