Which Zinsser primer should I use?

Summing up: All three Zinsser primers are very high quality, you just need to know which one to use for which application. Zinsser 123 is great for surfaces that are easier to adhere to and has low odor. Zinsser Cover Stain provides durability and adhesion on glossy glossy surfaces.

Which Zinsser primer is best?

There's a reason Rust-Oleum Zinsser Bulls Eye 1-2-3® Water-Base Primer is our most popular primer. This premium, whole-house primer- sealer provides outstanding performance indoors and out, with great flow and leveling and a flexible, acrylic formula.

What is the difference between Zinsser 123 and bin?

The 123, or Bullseye product is waterbased, can be used as a sealer primer, adhesive primer, priming friable surfaces and stain blocking. The BIN is meths based and is used as a primer and stain blocker too, the choice of which depends on what you need it for, can you give more information?

What is Zinsser 123 primer used for?

Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt - inside and out. For oil and water stains, fire and smoke damage try our next generation Bulls Eye® 1-2-3 Plus. Bulls Eye® 1-2-3 is rust inhibitive and ideal for new metal.

What's the difference between red and blue Zinsser?

The Red is B-I-N It is Shellac Based and is recommended for spot priming, and all glossy surfaces. It cleans up with ammonia and water or alcohol. The Blue label 1-2-3 is 100% acrylic water based all-purpose primer. It's good for exterior surfaces and is a soap and water clen-up.

Painting Varnished Wood with Zinsser Bulls Eye 123 Primer Sealer Stain Killer

Is Zinsser 123 any good?

It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A 'bond coat' primer that's great for hard-to-stick surfaces, it offers excellent adhesion without sanding.

What is the difference between Zinsser BIN and Zinsser Bullseye?

The quick dry formulation gives Bulls Eye 1-2-3 a 30 minute drying time with a 1 hour recoat time. Zinsser B-I-N is a shellac-based alternative to Bulls Eye 1-2-3 and is perfect for interior priming or for exterior spot priming.

Can I use Zinsser 123 as an undercoat?

Zinsser Bulls Eye 123 Primer is a fast-drying white-pigmented acrylic latex (water-thinnable) undercoat. It is formulated for use on most types of exterior and interior surfaces - previously painted or new work. Any oil or latex finish paint can be applied over Zinsser Bulls Eye 1-2-3.

Does Zinsser 123 need a top coat?

Application– Ready to use - no dilution necessary. In most cases only one coat is necessary. Porous surfaces may require two coats to properly seal. Prime entire surface for best results.

Should I sand before using Zinsser primer?

Answer: Yes, I always clean and sand cabinets before priming, using an electric sander. Sanding helps the primer stick better, and you'll have a smoother finish if you sand between each coat.

Can you use water-based paint over Zinsser BIN primer?

B-I-N®, developed in 1946, is the original shellac-based white-pigmented primer-sealer stain-killer. Great for use on all interior surfaces & spot priming on exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work. Any oil or latex paint can be applied over it.

Is Zinsser a good primer?

Zinsser has a great primer ideal for both interior and exterior applications, specifically the Bulls Eye 1-2-3 Interior/Exterior Water-Based Primer.

Which Zinsser is best for water stains?

Zinsser Universal Cleaner & Degreaser.

What is the best primer to use before painting?

Is Zinsser BIN oil or water based?

Zinsser Universal Degreaser & Cleaner is a water-based detergent that is colour fast, fabric safe and removes tough stains quickly and effectively from many surfaces.

Is one coat of Zinsser enough?

One coat of a high-quality water-based primer such as Zinsser's Bulls Eye 1-2-3, the Best Overall pick in our researched guide to the best paint primers for your projects, is all you need to bind the old white paint and the new shade, mask stains and recently patched or sanded areas, and reduce the amount of new paint ...

Does Zinsser primer need two coats?

Depending on how strong or bold the previous color is, it may be necessary to apply more than one coat of primer. However, it is not necessary to over apply the primer with so many coats. As long as the primer applies uniformly over the previous color, then one or two coats should be sufficient.

How long do I let Zinsser primer dry before painting?

DRY & RECOAT

Allow more time at cooler temperatures. Dries to touch in 5 minutes and can be topcoated in 30 minutes with latex or oil-based paints. For best results, allow primer to cure overnight before applying strong solvent- based topcoats.

How many coats of Zinsser primer should I use?

In most cases only one coat is necessary to prime most surfaces. If excessive absorption occurs over very porous substrates a second coat may be necessary. Spot priming is recommended only under high-hiding topcoat finishes. For best results, prime entire surface before painting.

Do you need to sand after Zinsser primer?

Answer: The cabinets should be cleaned and sanded to remove the glossy clear coat. This allows the primer to bond stronger to the surface. Use an electric sander with 150-grit sandpaper. You can brush and roll BIN, but it's messy to work with because it's as thin as water.

Can I apply Zinsser shellac with a foam roller?

Just keep in mind, if you use a foam roller, it can start to fall apart after a lot of use, due to the chemicals in Shellac. If you are working on a small project, a foam roller is fine! If you're working on a larger project I recommend a microfiber roller.

What type of primer is Zinsser 123?

Rust-Oleum® Zinsser® Bulls Eye 1-2-3® Water-Base Primer is a wall primer and sealer that provides outstanding performance indoors and out. It features low odor, great flow and leveling, and a flexible, acrylic formula.

Is Zinsser primer really thick?

Zinsser Bulls Eye 1-2-3 has a very thick consistency. Admittedly, some people don't like this characteristic because they feel that the primer is more difficult to brush out.

Can I use Zinsser Bullseye 123 on MDF?

This solvent-based paint from Zinsser is an all-round primer and sealer that makes it ideal as a base coat for MDF. It offers excellent adhesion to a large number of different surfaces, so while it's great for MDF, you can also use it on pretty much any interior surface.