Which wedge to use for chipping?

What degree wedge is best for chipping? For most golfers, a gap wedge or a sand wedge with loft of between 52° and 56° will produce the most consistent outcome when chipping. This is because you'll be able to play most short-game shots you're likely to come across out on the course.
Takedown request   |   View complete answer on golfmonthly.com


Is it better to chip with a 56 or 60 degree wedge?

As a general rule, average golfers will have an easier time hitting a 56-degree wedge compared to a 60-degree wedge. A 56-degree wedge will give just as much distance but it will also be a lot more consistent when you're chipping onto the green.
Takedown request   |   View complete answer on outofboundsgolf.com


Should you chip with a wedge?

For the average golfer, chipping with a gap wedge will produce the most consistent results when the ball is sitting down on the grass. Having a club with a bit more loft will help pick the ball out of the grass and give you the most control. For most chips, my gap and pitching wedge gave me the best results.
Takedown request   |   View complete answer on outofboundsgolf.com


What club should I use for chipping?

For a basic chip, use a 52- to 56-degree wedge. Play the ball center, and get your weight forward so your left shoulder is over your left foot.
Takedown request   |   View complete answer on golfdigest.com


What club should I use for chipping around the green?

But for most cases where there's enough green that the ball has a chance to roll to the hole like a putt, a lower-lofted club like a 7-, 8-, 9-iron, PW or hybrid (in some cases) should be used to chip. Alright, we're to the point so let's go with it.
Takedown request   |   View complete answer on scramble.golftec.com


WHAT WEDGE SHOULD YOU USE? Simple Golf Tips



Can I chip with a pitching wedge?

A pitching wedge can also be very useful for chipping around the green. It's best to experiment with different lofts and clubface orientations to get the trajectory you want, whether it be a low roller or a higher shot with less rollout.
Takedown request   |   View complete answer on golfstead.com


What is the rule of 12 in Chipping?

The Rule of 12 In Golf Chipping. The rule of 12 is a golf chipping technique that explains the exact relationship between the loft on a golf club and the amount of roll you will get on a chip shot. We use 12 yards as the total distance we want the ball to carry on the chip.
Takedown request   |   View complete answer on aecinfo.org


Do any pros use a chipper?

Single-faced chippers are legal to use on the PGA Tour, but you'll never see a professional golfer use one. Because chippers are designed for mid-to-high handicappers, and give the player less control over the spin on their golf ball, they are not typically suited to highly-skilled players such as professional golfers.
Takedown request   |   View complete answer on projectgolfau.com


What is 52 degree wedge used for?

Just like a 50-degree, a 52 wedge will be used for full shots from the fairway or for chip shots where you need both height and roll. A 56-degree might not roll out that well, so that's why you'd want a gap wedge. Can you use a 52-degree wedge as a sand wedge? A 52-degree wedge should only be used in a fairway bunker.
Takedown request   |   View complete answer on outofboundsgolf.com


What do you use a 60 degree wedge for?

A 60-degree wedge is considered a lob wedge and is mostly used to launch the ball high up in the air and land softly on the green. Examples could be hitting the ball over water or sand and quickly stopping it on the green. I used to have a 60 degree in my bag and it did come in handy in certain situations.
Takedown request   |   View complete answer on outofboundsgolf.com


What 3 wedges should I carry?

Know your pitching wedge loft.

If it's 45 degrees or less, add three more wedges that are spaced apart by no more than 4-5 degrees each. So generally think about putting in a gap wedge that's 48 or 50 degrees, a sand wedge that's between 54 and 56 degrees, and a lob wedge that's between 58 and 60 degrees.
Takedown request   |   View complete answer on golfdigest.com


Should a high handicapper use a 60 degree wedge?

What Loft Wedges Should A High Handicapper Carry? High handicappers should carry at least a 56-degree wedge. In addition, it makes sense to have a 52-degree wedge and a 60-degree wedge to have a variety of shots. The thing that you have to pay attention to is the loft gapping in the set.
Takedown request   |   View complete answer on toprankgolf.com


What degree is a chipper?

Commonly referred to as just a “chipper,” this golf club combines a putter with a wedge. Featuring a 30° - 37° loft, your chipper is the ideal club for those shots that are too long for a putter and too short for a wedge—in the rough or short grass, just a few feet from the green.
Takedown request   |   View complete answer on hurricanegolf.com


Should you break wrists when chipping?

So hitting through, keeping some width and not flicking the wrists. So an answer to the question, 'Should you hinge your wrist when you're chipping? ' The answer should be no. Try and keep your wrists not locked out but fairly firm push it through fairly to more of a putting motion rather than a flicking motion.
Takedown request   |   View complete answer on golf-info-guide.com


How do I get better at chipping?

10 basic tips that can help golfers chip better than ever
  1. Be in proper posture. ...
  2. Tweak your stance and setup. ...
  3. Understand ball-turf interaction. ...
  4. Understand your chipping stroke. ...
  5. Develop your feel. ...
  6. Adjust your ball position. ...
  7. Calibrate your distance control. ...
  8. Practice with an alignment rod.
Takedown request   |   View complete answer on golf.com


What is a 64 degree wedge used for?

A 64 degree wedge is best used for very short distance shots, or shots where a lot of height is needed. Generally, if you are about 5 yards away from the green, or are on the far side of the green, this club will benefit you greatly. Any distance beyond 40 yards and this club will come up short for green shots.
Takedown request   |   View complete answer on primeputters.com


What is a 48 degree wedge used for?

The 48 degree wedge is also known as the pitching wedge and is an important loft that is preferred for long-distance shots. It helps in all types of grounds except in the sand and mud. You can enjoy the golf with the best possible experience without having any issues.
Takedown request   |   View complete answer on golfstorageguide.com


What is difference between 54 & 56 degree wedge?

What are the differences between the 54 and 56 degree wedges? The main difference between the 54° wedge and the 56° wedge is that the 54° wedge hits 75 to 80 yards, whereas the 56° wedge hits 70 to 75 yards. Both are generally used for the same purposes, however the 54° wedge gets a bit more distance.
Takedown request   |   View complete answer on primeputters.com


How far should I hit my 56 degree wedge?

How Far Should You Hit A 56 Degree Wedge? On average, golfers hit their 56-degree wedge 84 yards, but the range can vary between 75 and 105 yards. Longer hitters who take a full swing typically hit over 100 yards, but most golfers take a 1/2 to 3/4 swing with their sand wedge.
Takedown request   |   View complete answer on outofboundsgolf.com