Which of the following workplace containers does not require a label?

Portable containers are used to transfer a chemical from one location to another to be used immediately. Portable containers cannot be used to store chemicals. Portable containers are not required to have a label.

What workplace containers do not require a label?

The only two reasons a workplace label may not be required is if an employee transfers a hazardous product and uses it immediately or if the product remains, "under the control of the person who decanted it" according to CCOHS.

Do secondary containers need GHS labels?

Labeling Requirements for Secondary Containers

These secondary containers are required to be labeled with a GHS chemical label, given if any of the following events occur: -The material is not used within the work shift of the individual who makes the transfer. -The worker who made the transfer leaves the work area.

What types of containers must be properly labeled?

The contents of all containers and transfer vessels, including, but not limited to, incoming commercial containers from the manufacturer, beakers, flasks, reaction vessels, and process equipment, should be properly identified.

Does a non hazardous material container still require labeling?

EPA/RCRA labeling requirements

To begin with, EPA stipulates that any waste container equal to or less than 119 gallons must be properly labeled.

Part 3 - Hazard Communication Chemical Labeling

What type of containers will be required what information needs to go on the label of your container?

Chemical Manufacturer Responsibilities

Containers also must have the following identification on the container, label or tag [29 CFR 1910.1200(f)(1)]: The identity of the hazardous chemical. Appropriate hazard warnings. The name and address of the chemical manufacturer, importer, or other responsible party.

Do all containers that contain chemicals need to be labeled?

While the DOT diamond label is required for all hazardous chemicals on the outside shipping containers, chemicals in smaller containers inside the larger shipped container do not require the DOT diamond but do require the OSHA pictograms. (See Example 2.) Labels must be legible, in English, and prominently displayed.

What is required on a workplace container label?

In general, a workplace label will require the following information: Product name (matching the SDS product name). Safe handling precautions, may include pictograms or other supplier label information. A reference to the SDS (if available).

Why do chemical containers need labels?

If you transfer a hazardous chemical into a secondary container, the secondary container must be correctly labeled to ensure workers are readily aware of the contents and understand the hazards.

What is container label?

Container labeling is a very effective method to communicate the physical and health hazards of chemicals used in the workplace. The information on a container label will vary depending on what type of container it is and how it is used.

Which 3 types of products are excluded from Labelling and SDS requirements?

What requires a GHS label?

Both primary and secondary containers need to be labeled in order to be considered GHS compliant. Primary containers are typically the large barrels, boxes, or drums that come directly from a manufacturer. Any label already placed on a primary container should not be altered or removed.

Does water need a secondary label?

The short answer is “no”.

Water is not required by OSHA to be labeled.

What does OSHA require on a secondary container label?

This label must contain two key pieces of information: the identity of the hazardous chemical(s) in the container (e.g., chemical name) and the hazards present. There are many ways to communicate this hazard information. Employers should select a system that will work for each location.

Which of the following alternative workplace labeling systems is permitted by OSHA quizlet?

OSHA's FAQ says that alternative labeling systems such as the National Fire Protection Association (NFPA) 704 Hazard Rating and the Hazardous Material Information System (HMIS) are permitted for workplace containers. However, the information supplied on these labels must be consistent with the revised HCS.

Which of the following alternative workplace labeling systems is permitted by OSHA?

OSHA will allow the NFPA and HMIS rating systems to be used on the labels if it does not contradict or cast doubt on the information required by the HCS.

What are labels used for?

Labels may be used for any combination of identification, information, warning, instructions for use, environmental advice or advertising. They may be stickers, permanent or temporary labels or printed packaging.

What type of container is expressly exempted from the hazard communication standards for labeling?

What type of container is expressly exempted from the hazard communication standards for labeling? Yes it is and pipes are the type of container exempted.

Do all products have WHMIS labels?

Not all products are controlled by the WHMIS legislation, and so they may not have WHMIS labels or use the exact same symbols as WHMIS.

What is required on a workplace label WHMIS 2015?

In WHMIS 2015, supplier labels for hazardous workplace products must display the product identifier and supplier identifier, as well as hazard pictogram(s); signal words (new); hazard statement(s); and precautionary statement(s) assigned based on the hazard classification.

What information is not on a supplier label?

If a supplier label is not attached to a controlled product you are not to use the material until the supplier gives you an MSDS and a supplier label. contain the following information: product identifier (name of product) supplier identifier (name of company that sold it)

Which of the following items must be included on the labels for secondary containers choices?

OSHA Requirements for Secondary Container Labels

As you can see from the regulation, the only specific requirement is that that label include the product identifier.

What must a container of sanitizing agent be labeled with?

Spray Bottles

→ Properly label spray bottle(s) “sanitizer,” or name of chemical.

What is a stationary process container?

Process containers are stationary containers that hold a hazardous substance during manufacture or use, for example, a mixing container, reaction vessel, distillation column, drier or dip tank.

When a container is missing labeling what needs to be done?

If the label is missing or unreadable, report it to your supervisor immediately. Never remove or deface existing container labels unless the container is immediately labeled with the required information.