Which of the following actions is required of powerboat a when approaching sailboat B head on in darkness or reduced visibility?

Give way to your starboard side. Powerboat A: When only red and green lights are visible, you are approaching a sailboat head-on. Give way to your starboard side. Powerboat B: When white, red and green lights are visible, you are approaching a powerboat head-on.

What should a motorboat do when approaching a sailboat head on?

Head On - When two motor boats approach each other head on, both boats turn to the right and pass each other port to port. Sailboats When encountering sailboats that are sailing, motorboats generally should give way. If you are motoring in a sailboat, you should give way to sailboats that are sailing.

When a sailboat is approaching a powerboat?

Paths That Cross: The power-driven vessel is the give-way vessel. The sailing vessel is the stand-on vessel. Overtaking: The vessel that is overtaking another vessel is the give-way vessel, regardless of whether it is a sailing vessel or a power-driven vessel. The vessel being overtaken is always the stand-on vessel.

What should powerboat a do when being approached by powerboat B?

Power-driven vessels crossing

The operator of a powerboat should maintain his course when being approached on his port side by another powerboat.

When operating a powerboat at night what lights must be shown?

An all-round white light (if less than 39.4 feet long) or both a masthead light and a sternlight. These lights must be visible from a distance of at least two miles away on a dark, clear night.

How to analyze the most used options of applying parallel and in-series connecting of turbopumps

What lights are required on a sailboat at night?

Sailboat operating at night (properly lit sailboat)

The operator of a sailboat operating under sails at night shall, from sunset to sunrise, display: sidelights (red - green) and. sternlight (white). If less than 20 meters in length, the three lights may be combined at or near the top of the mast.

What action should you take if you are approaching another boat at night and see a white light?

What Does a White Light Indicate? If only a white light is visible, you may be approaching another craft from behind. You are the give-way-craft and must take early and substantial action to steer well clear by altering your course and passing at a safe distance on the starboard (right) or port (left) side.

What should a sailboat operator do when approaching?

Both vessels should turn to starboard (the right). Paths That Cross: The vessel on the operator's port (left) side is the give-way vessel. The vessel on the operator's starboard (right) side is the stand-on vessel. Overtaking: The vessel that is overtaking another vessel is the give-way vessel.

What should you do when approaching another vessel head-on?

Head-on Approach

When power-driven boats approach each other head-on, neither boat has the right-of-way. Both operators (A and B) must take early action to steer clear of each other and steer starboard (to the right) as soon as possible in order to avoid a collision.

Which of the following actions is required of boat a while overtaking boat B?

Vessel A must blow one short blast and alter course to starboard, or blow two short blasts and alter course to port, and Vessel B must return the same sound signal(s) to indicate understanding.

What do you do if you meet a sailboat head-on?

If you meet another boat head-on: Under the boating rules of the road, vessels approaching each other head-on are always supposed to pass each other port to port — or left to left, just like on the road.

When a power boat meets a sailboat who has the right of way?

When two power driven boats are approaching at right angles or nearly so, and risk of collision exists, the boat on the right is the stand-on vessel, has the right of way and must hold its course and speed.

What should a powerboat do when about to cross paths with a sailboat?

Sailboat under sail

When a powerboat is overtaking a sailboat: a power-driven vessel shall keep out of the way of a sailing vessel, and a sailing vessel that is being overtaken shall keep her course and speed.

What should a sailboat operator do when approaching a PWC head-on slow down and change course?

The motorboat should slow down and let the PWC pass because the PWC is smaller. The PWC should speed up and attempt to cross in front of the motorboat.

What action should be taken if a motorboat and PWC are approaching head-on?

A motorboat and a PWC are approaching head-on. What action should be taken? Both vessels should turn to starboard (right). Both should maintain course until the last moment.

What action would you take if you encounter a head-on situation?

In accordance with Rule 14 (a) (Head-on situation), when two power-driven vessels are meeting on reciprocal courses so as to involve risk of collision each shall alter her course to starboard so that each shall pass on the port side of the other.

When approaching another boat head-on you should steer to starboard and sound how many horn blasts Boatsmart?

Using Sound Signals for Navigation

One short blast = I'm altering my course to starboard (to the right). Two short blasts = I'm altering my course to port (to the left). Three short blasts = I'm operating my boat in reverse. Five rapid blasts = I'm unsure of the other boater's intentions.

What action should you take another powerboat approaches you from the port side?

Port: If a power-driven boat approaches your boat from the port sector, maintain your course and speed with caution. You are the stand-on craft. Starboard: If any vessel approaches your boat from the starboard sector, you must keep out of its way. You are the give-way craft.

What action must a sailboat take?

Every pleasure boat operator who must give-way to another vessel, that means the operator who has to move, must take "early and substantial action to avoid a collision." The stand-on vessel must "maintain course and speed."

What should the operator of two powered vessels do that approach each other in a head-on situation?

. If two powered vessels approach each other in a head-on situation Both Should Stay Right And Prepare To Give Way. That means to pass each other port to port, or left side to left side, just like cars on a highway.

What should you do when operating during a period of restricted visibility?

During periods of restricted visibility (such as rain, mist, heavy fog, or hours of darkness), you should slow to minimum speed to give your vessel an opportunity to maneuver should the risk of a collision arise.

Are approaching another boat assume that according to the navigation rules you are the stand-on boat which exception to the rules means you must give way?

You are approaching another boat. Assume that according to the navigation rules, you are the stand-on boat. Which exception to the rules means you must give way? One boat is overtaking another.

When operating a powerboat at night you see red and white lights on another boat What should you do?

Stand on. Powerboat A: When only white and red lights are visible, you are approaching the port side of a powerboat. Give way to your starboard side.

What should the operator of a powerboat do when approaching a very large vessel?

When crossing shipping lanes or traveling in shipping lanes, pleasure craft operators need to watch for large ships and keep the following in mind. Watch out for other vessels, and be ready to slow down and yield to large vessels. Use radar and a radio if you have them.

How do you pass a boat at night?