Which is better insulation spray foam or fiberglass?

Spray foam insulation has a higher R-value than fiberglass, making it a better insulator. Another difference between them is that spray foam is watertight while fiberglass cracks under moisture. However, installing spray foam requires a professional while fiberglass is easy to install yourself.

Is it better to use spray foam insulation or fiberglass?

If you're looking for insulation that also blocks sound, fiberglass isn't the best option. While it will block some sound, open-cell spray foam blocks a lot more of it. Spray foam helps to block pollen and dust too, which is great for people with allergies.

What is the disadvantage of spray foam insulation?

On the downside, spray foam insulation comes at a price that is considerably more expensive than fiberglass. Often times, spray foam is triple the price of fiberglass and sometimes it can be more. Applying spray foam insulation is also something that is not advised to do by yourself unless it is a very small job.

Is spray foam insulation more expensive than fiberglass?

On the whole, spray foam insulation costs two to three times as much as fiberglass insulation. Fiberglass insulation costs around $0.40 per square foot. Spray foam can be significantly more expensive, but can lead to bigger savings on heating and cooling costs.

Is it cheaper to spray foam or fiberglass?

However, looking at basic prices, it's clear that fiberglass is cheaper than spray foam. At The Home Depot you can get a roll of fiberglass with almost 50 square feet for $10, while spray foam can fill up that same space between $22 (open-cell) and $50 (closed-cell).

Spray Foam Insulation vs. Fiberglass

Is spray foam insulation worth the extra money?

If you see the benefit of insulating your new construction home correctly from the start for long-term comfort, energy savings month after month, and fewer headaches while you live in the house, then spray foam insulation may very well be worth the extra cost to you.

What is the R-value of 4 inches of spray foam?

Spray Foam Insulation R-Value

Open cell spray foam insulation is R-3.6 to R-3.9 per inch. This R-Value is normal for open cell spray foam.

How long does spray foam insulation last?

Typical Insulation Lifespan

The International Association of Certified Home Inspectors states that spray foam insulation, wrap tape and housewrap insulation can last for more than 80 years. At the same time, cellulose, loose-fill, foamboard, loose fill and rock wool insulation can last up to 100 years.

Is spray foam in the attic worth it?

A properly done spray foam job not only insulates but also greatly reduces the air leakage of a home. But that only works if the installer can get it into the places where most of the air leakage happens. In an attic, the eaves are one of the most critical places to get good coverage with the foam.

Can mold grow on spray foam insulation?

As a product, spray foam insulation does not attract mold. And unlike wood or metal, spray foam does not rot, rust or deteriorate. This means that an area properly sprayed with foam insulation will never become a food source or a hospitable environment for a mold colony.

Does spray foam devalue your house?

In fact, according to Heritage House, they have seen entire roofs rotted and unrecoverable after SPF has been used. They state that by using SPF in your roof, '…you will devalue your home by the amount that a new roof will cost, and more. ' And we agree.

Does spray foam insulation increase home value?

Home inspections coupled with lower energy bills will certify your home's thermal efficiency and value. Investing in ThermoSeal Spray Foam Insulation will boost your home's resale value making it the best investment money can buy.

How thick should spray foam insulation be in attic?

Now generically speaking, we usually recommend open cell spray foam to be 6- to 10-inches on a roof deck or ceiling and 3-inches in the walls. Closed cell spray foam should be 4- to 5- inches on the ceiling and 2- to 3-inches in the walls.

Is spray foam insulation a good choice?

R-value is a simple “the higher, the better” statistic. On paper, spray foam is the clear winner in this category, as closed cell foam can reach staggering R-value heights of up to 7.0. It also doesn't sag or settle over time, a side effect that fiberglass insulation suffers from when it's installed incorrectly.

Which insulation is best for attic?

Many people consider fiberglass batt to be the best attic insulation. It consists of plastic reinforced by small glass fibers. The batt version comes in blanket form — i.e., small, pre-cut sections that you can lay down wherever you need to.

Where should you not use spray foam insulation?

Which spray foam insulation is best?

Closed cell foam is the best choice for robust insulating where space is an issue, as it can achieve 2x the R-Value of open cell inside a standard wall. Its rigid nature also adds to the structural integrity of the building and E84 fire rated versions are available.

Will termites eat through foam insulation?

Researchers have concluded that termites do not eat the foam board insulation but they will tunnel through it. Insulation also provides potential protection from predators and also retains moisture, two requirements of termites.

Does spray foam crack?

Spray foam is rigid and inflexible once it cures, and foam boards are rigid from the outset. So when these materials expand and contract because of temperature changes - and that's when, not if - they can crack.

What insulation lasts the longest?

Cellulose insulation usually lasts 20 to 30 years before it starts to degrade, and mineral wool also lasts decades as long as it is not damaged. Spray foam insulation is one of the longest-lasting.

Do you need a vapor barrier with spray foam insulation?

A vapour barrier is not necessary with closed-cell foam but with open-cell spray foam such as Icynene®, it is sometimes required. Any air that migrates though a building envelope will carry water vapour. As Icynene® spray foam creates a seamless air-seal, it controls air leakage and the moisture in the air.

What is the thinnest insulation with highest R-value?

Aerogel insulation offers the highest R-value of any insulating material at less weight and thickness—ideal for construction, refineries, pipelines, and thin-gap thermal barriers.

What spray foam has the highest R-value?

Spray Foam

The foam (usually polyurethane) is sprayed to fill cracks and gaps in the attic to form a hermetically sealed barrier. Spray foam provides the highest R-value – while open cell spray foam has about an R-value of 2.2 to 3.5 per inch, closed cell spray foam has about 6-7 per inch.