Which is better a deck or patio?

Decks can provide a great view, while patios tend to offer more privacy. The views from your deck or patio depend on your home's location and surrounding environment. However, decks usually offer better views than patios due to their elevation.
Takedown request   |   View complete answer on bobvila.com


Is it cheaper to build a deck or patio?

In short, patios are usually cheaper than decks.

These include: Materials used (concrete, vinyl, wood) Location of the addition (on the ground without supports, above ground, on the house with a door already leading out or in an area in which a door addition must be made)
Takedown request   |   View complete answer on greatdayimprovements.com


Should I replace my deck with a patio?

Contrary to many peoples' impressions, patios are actually much cheaper than decks if you're building fairly close to the ground. In our mind, a patio is always preferable if you're going to need it within 2-3 feet of ground level.
Takedown request   |   View complete answer on axellandscape.com


Does a patio cost more than a deck?

Most affordable: Patio

Building a deck costs between $4,080 and $11,300, with an average total cost of $7,700. This works out as $30 to $60 per square foot. Building a patio costs between $1,880 and $5,380, or an average project price of $3,620. This equates to $8 to $20 per square foot.
Takedown request   |   View complete answer on homeadvisor.com


Is it cheaper to build a deck or pour a concrete patio?

It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
Takedown request   |   View complete answer on decks.com


Deck or Patio (which is best?)



What adds more value to a home a deck or patio?

Both a deck and a patio offer an impressive resale value. However, patios are usually less expensive to put in and their resale value sits at 100%—which is slightly higher than the 76% resale value of a deck.
Takedown request   |   View complete answer on rstbrands.com


Is a patio worth it?

Outdoor rooms

A dining area, dry laid patio, a patch of gravel, a covered patio or an above-grade deck: According to SmartMoney.com, a landscaped patio raises the value of your home by 12.4 percent. Today's best-selling improvement is a backyard terrace that abuts the family room.
Takedown request   |   View complete answer on today.com


How much does a 20x20 paver patio cost?

A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
Takedown request   |   View complete answer on homeguide.com


Is a wood deck or concrete patio cheaper?

Overall, a concrete patio will generally be cheaper to install compared to a deck. While your specific house and yard set-up may determine which is cheaper for your individual needs, a wood deck is likely to have a better return on investment compared to a concrete patio.
Takedown request   |   View complete answer on tnthomeimprovements.com


What can I do instead of a deck?

Decking Alternatives
  • Natural Stone And Porcelain. Firstly, let's start with one of the most expensive options. ...
  • Poured Concrete. If you decide that concrete slabs are not for you, and you are looking for a super low-cost option, you could contemplate a patio made from poured concrete. ...
  • Timber Decking.
Takedown request   |   View complete answer on neotimber.com


Should I get rid of my deck?

But if your wood deck is looking a little worse-for-wear, it may be time to tear it down. Getting rid of a worn or broken deck opens up your landscaping to endless possibilities. “A savvy homeowner can usually save money by removing the deck themselves, and spend the money they save on building a new one.”
Takedown request   |   View complete answer on dumpsters.com


What is the difference between patio and deck?

Most patios are set on a concrete slab or a sand and pebble base. Since patios are built at or around ground level, they don't require safety railings. Decks are primarily made of wood or a composite wood material or vinyl, like Trex. Popular woods for decking include redwood, cedar, and pressure-treated pine.
Takedown request   |   View complete answer on thespruce.com


Does a deck increase property value?

In terms of pure home resale value, wood decks provide the best return on your investment. The more affordable material translates to a more affordable deck project while boosting the resale value of your home to a similar amount compared to a composite deck.
Takedown request   |   View complete answer on trexfurniture.com


How much is a 12x12 concrete patio?

The average cost for a 12′ x 12′ concrete patio is about $1,700, or $12 per square foot. The typical range for a concrete patio depending on design, color, and texture is $6 to $16 per square foot, or $864 for a plain slab to a vibrant custom design that costs $2,300.
Takedown request   |   View complete answer on inchcalculator.com


Should I put a roof over my deck?

A regular deck can support a certain amount of weight per square foot, but a deck roof adds a lot of weight and requires support. In most cases, larger footings and sometimes more footings are required for a roofed deck. This is why it's best to add a roof during initial deck construction.
Takedown request   |   View complete answer on mrhandyman.com


How much value does a deck add to a house?

According to JLC Group's Magazine research report, adding a deck can increase your home value significantly. The average cost of constructing a wooden deck is $13,000 with a resale value of $10,080, meaning you can recoup about 75% of the total cost after selling your home.
Takedown request   |   View complete answer on tnthomeimprovements.com


What is a good size deck?

Most builders suggest that your deck should be no larger than 20 percent of the house's* square footage. This is so that the deck does not overwhelm a home visually. This, of course, is up to you. If you feel you need a larger deck that takes up more of your yard space, feel free!
Takedown request   |   View complete answer on armadillodeck.com


Is poured concrete cheaper than pavers?

As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Takedown request   |   View complete answer on peacockpavers.com


How much does a 20x20 deck cost?

The average homeowner spends $2,200 to build a 10x10 foot deck, $6,160 to build a 14x20 deck, and $8,800 to build a 20x20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
Takedown request   |   View complete answer on homeguide.com


Is stamped concrete less expensive than pavers?

In terms of upfront cost, poured and stamped concrete tends to be the cheaper option. Concrete is fairly inexpensive, and you can cover a large plot of the land fairly quickly. Pavers are more expensive since each tile needs to be purchased individually. You will also pay more in labor costs for installation.
Takedown request   |   View complete answer on centralhomesupply.com


What is a good patio size?

For comfortable entertaining, you need a minimum patio size of 550 square feet (51 square meters). For every person, you should set a space of 25 square feet (2.32 square meters). Therefore, if you want to have 50 people on your patio, the ideal space would be 1250 square feet (116.13 square meters).
Takedown request   |   View complete answer on yourownarchitect.com


What is the cheapest way to build a patio?

Concrete is one of the cheapest and most popular materials that can be used to build a hard-surface patio. The aggregates of concrete can be stone, gravel, sand, or shells, which are mixed with water to form a paste that dries into a hard surface when left to settle.
Takedown request   |   View complete answer on legendsbuilt.com