Which grade of OPC cement is best?

Ordinary Portland Cement (OPC):

Grade 33 refers to the cement attaining compression strength of 33 Mpa in 28 days of setting. This is same for 43 and 53 grades of cement. Grade 33 and 43 were used for construction in the past. As per IS standard code Grade 53 grade of cement is recommended for house construction.

Which is best 43 or 53 grade cement?

OPC 53 grade cement has better quality, strength, and less setting time compared to 33 and 43 grades of cement. Due to its high strength, is used for making concrete of higher grade (Above M20). It is the best choice for all houses, buildings, apartments, and high-rise building construction work.

Which is better OPC 43 and OPC 53?

OPC 53 sets quicker than OPC 43 and has a quite low initial setting time. It is used in structures where rapid strength gain is required like large load bearing structures like bridges, huge buildings, etc. OPC 43 on the other hand doesn't set so quickly and has a normal initial and final setting time.

Which cement is better 33 grade or 53 grade and why?

The strength of 53 grade does not increase much after 28 days because of early strength gain. While 33 grade and 43-grade cement continue to gain strength after 28 days. With time 33 and 43-grade cement will attain the same ultimate strength as that of 53-grade cement.

What is the difference between OPC 43 Grade 53 grade cement?

53 Grade OPC cement is Used in RCC and pre-stressed concrete of higher grades, cement grouts, instant plugging mortars etc. where initial higher strength is the criteria. 43 Grade OPC Cement is commonly used for plastering works, Non-RCC structures, pathways etc where initial setting time is not of importance.

WHAT IS 33,43 AND 53 GRADE OF CEMENT||COMPRESSIVE STRENGTH BY CIVIL GURUJI

What is OPC 33 grade cement?

OPC 33 Grade:

The 33 Grade portland cement is more workable as compared to other grades of portland cement. It is generally used as a mortar for plaster and masonry works.

Is 43 grade cement good for house construction?

43 Grade OPC Cement is recommended for plastering ,tiling , masonry works, Non-RCC structures, pathways etc. where initial days strength is not of prime importance.

Which is better OPC or PPC?

PPC cement is generally used for plastering, brick masonry and waterproofing works. PPC has a lower heat of hydration and it is prone to fewer cracks compared to OPC. PPC has lower strength than OPC but PPC provides better workability and finishing than OPC. PPC provides greater resistance to chemicals.

Is 43 grade RCC cement good?

Unless a project requires very high strength cement, the use of 43 Grade OPC is generally recommended in general civil construction work such as residential, commercial and industrial structures. It is used in RCC works, preferably where the grade of concrete is up to M-30.

Which grade cement is best for RCC?

OPC 53 Grade cement is recommended in all RCC structures like footing, column, beam and slabs, where ever initial and ultimate strength is the major structural requirement.

Which cement is best for roof?

The best roof cement in India includes OPC53 grade and PPC cement, brand name Ambuja plus Roof Special Cement, ACC Gold, ACC F2R, Shri Roofon Concrete Master, Ramco Supercrat Cement.

Can we use 53 grade cement for plastering?

The 53 Grade is recommended for footing, beams, slab, and columns since you need to have initial strength while making these structures. For general plastering work or masonry work, you may use the other two PPC and PSC.

Why do we use 53 grade cement?

OPC 53 Grade cement is required to conform to BIS specification IS:12269-1987 with a designed strength for 28 days being a minimum of 53 MPa or 530 kg/sqcm. 53 Grade OPC provides high strength and durability to structures because of its optimum particle size distribution and superior crystallized structure.

Which is the best OPC cement in India?

Where is OPC and PPC cement used?

Use of PPC and OPC

They can be reliably utilized in the construction of marine structures, masonry mortars and plastering, hydraulic structures. Besides, they are popularly used in mass concreting works, such as dykes, sewage pipes, dams, etc. PPC is also employed in all other applications where OPC is used.

What is OPC 53 grade cement?

OPC 53 Grade cement is required to conform to BIS specification IS:12269-1987 with a designed strength for 28 days being a minimum of 53 MPa or 530 kg/sqcm. 53 Grade OPC provides high strength and durability to structures because of its optimum particle size distribution and superior crystallized structure.

What OPC 43?

Ordinary Portland Cement (OPC) 43 Grade is a premium quality cement manufactured from world renowned Narzi limestone. Made using next generation German Technology, the 43 Grade cement develops high early strength as well as high ultimate strength.

Is code for OPC 53 grade cement?

For 53 grade cement, IS code used to be IS 12269.

Which cement is best for foundation?

Which type of cement is best for constructing the foundation? The foundation carries the load of the construction and hence needs to be strong and durable. Portland Pozzolana Cement (PPC) is the ideal cement to be used as it hydrates slowly and gives high final strength.

Which cement is best for wall construction?

Ordinary Portland Cement (OPC) 43 Grade Cement:

It is used majorly for wall plastering works, Non-RCC structures, pathways etc. 43-grade cement attains a compression strength of 43 Mpa (megapascals) in 28 days of setting.

Which cement is costly OPC or PPC?

Cost. The cost of OPC is around 300 rupees per bag which is slightly more expensive than PPC. Whereas in the case of PPC, the expensive clinker is replaced by pozzolanic Material such as fly ash hence the price of PPC is slightly less than who OPC.

Is OPC cement good for construction?

Both OPC and PPC cements are good for construction of concrete slab. OPC is the most commonly used cement in industrial and large construction, PPC is most commonly used for small residential constructions. PPC is used where possibilities of sulphate attack is higher as it has good sulphate resistance compared to OPC.

Which grade is best for slab?

Ordinary Portland cement of 53 Grade is suitable for all types of RCC structures and is mainly used for the construction of slabs.

What is OPC cement?

Ordinary Portland cement (simply called ordinary cement) refers to the hydraulic binding material ground by mixing Portland cement clinker, 6% ~ 15% blended materials, and appropriate amount of gypsum, code-named P• O.