Which faux stone is best?

Eldorado Stone voted best manufactured stone and brick veneer brand among builders and contractors.

How do I choose stone veneer?

Color is a Big Factor. The color that you go with for your veneer is going to play a big role in the appearance of the finished product. Most homeowners will want to go with a pattern that varies its color rather significantly within the design, so one shade doesn't dominate the appearance.

Are faux stone panels good?

Faux stone panels are made of lightweight foam. While easy to cut and apply, faux stone panels are not durable against impact. Natural stone and manufactured stone are heavy, mineral-based products and are more durable. Faux stone panels' greatest advantage is that they are easy to apply, requiring no mortar or grout.

What is the difference between faux stone and veneer?

There may be some stone veneers that are made from real stone, which are referred to as natural stone veneers. Faux stone veneer, however, is made from a mixture of concrete. Which is primarily cement mixed with lightweight aggregate, that has been blended with pigments to give it a natural look.

How long does faux stone last?

This “faux stone” is much lighter, easier to install, and much more affordable. With the proper maintenance and upkeep, manufactured stone veneer siding can last anywhere from 20-75 years, and at least as long as the house it's built on.

#1 TOP RATED - SUPER EASY and FAST exterior FAUX STONE wall panel INSTALLATION DIY

What is GenStone made from?

GenStone faux stone veneer panels are made from 99.9% waterproof high-density polyurethane. More importantly, the material used to make GenStone is a closed-cell polyurethane. “Closed-cell” means the material is very dense.

Is faux stone cheaper than real stone?

Cultured stone might be cheaper, but it also will not last as long. Natural stone does not cost that much more upfront, and it will last longer and maintain its high-quality appearance for many years to come.

Does faux stone fade?

Appearance and Color Fastness

Veneer stone's colors can fade over time. Inexpensive, inferior manufactured stone can be a tempting purchase, but often, its appearance is lacking. It can have highly repetitive patterns (or monochromatic colors) and be as little as one inch in thickness.

Does stone veneer increase home value?

Not only does stone give your home a sophisticated look, but it actually adds value to your home. According to the 2016 Cost vs. Value Report, you can recoup up to 93 percent of the value of natural stone veneer. This makes stone veneer a natural choice when considering options to boost your home's curb appeal.

Is cultured stone the same as engineered stone?

So what is the difference between Engineered Stone and Cultured Stone? The main difference between the term Engineered Stone and Cultured stone is the recycled stone particles are products are composed of. Many years ago the stone particles, or filler, that make up our product was simply crushed limestone.

Does faux stone feel real?

Faux Stone PanelsVery lightweight: each faux stone panel weighs only a few pounds (which is about one pound per square foot), which highly contributes to the ease of its installation. (Panels & Individual)About 70% the weight of genuine natural stone, and thus feels very authentic.

What is the difference between cultured stone and stone veneer?

Natural stone veneer features imperfections, textures and tonal variation that has formed over thousands of years. Manufactured cultured stone veneer, on the other hand, is a man-made product designed to resemble natural stone.

Is stone veneer any good?

Artificial stone veneer siding is long-lasting and durable. Manufacturers' warranties range from 20 to 75 years. If properly installed, faux stone veneer siding is maintenance-free and more fire-resistant than wood or vinyl siding. It's also a versatile building product.

How much does stone veneer cost?

Stone veneer can vary from $6 to $9 per square foot, compared to natural stone siding costing $15.00 to $30.00 per square foot. Obviously, the larger the area you're covering, the higher the cost will rise.

How much does it cost to put stone veneer on a house?

Average cost: $8,250 - $16,125

Stone veneer siding costs range from $5.50 to $10.75 per square foot installed. The cost to install stone veneer siding on the average sized 1,500 square foot home would fall between $8,250 and $16,125, or an average of $12, 188.

What is the difference between stacked stone and ledgestone?

Also known as stacked stone, ledgestone is a type of natural stone tile used for walls, fireplaces or borders. It is made of all kinds of rectangular stripes of natural stone arranged uniformly on a mesh to form a veneer.

How much does stone veneer labor cost?

Stone veneer siding costs $11 to $18 per square foot on average and usually comes in sheets. Installation labor costs around $2 to $4 per square foot on top of materials, for a total cost of around $13 to $22 per square foot.

How do you attach stone veneer to the front of a house?

Does stone veneer come in sheets?

The sheets of stone veneer are derived from real stone; it is flexible and it's more of a peel and stick sort of item. You can also cut it which is very convenient. However, these sheets are only ideal for indoor projects.

Is GenStone fireproof?

The class A panels are fire-rated and can be special ordered through our corporate office and would take roughly 3-6 weeks to make. You can reach our corporate office at 303-904-7200. We have had many of our customers use GenStone around their fireplaces with no issues.

What is the thickness of stone veneer?

How thick is your stone veneer? Approximately 1 ¼” to 1 ½” thick. The total installed depth is 2 – 3 ½” thick. The reduced thickness makes it easy for you to install our stone veneers using traditional masonry methods and perfect for interior or exterior application.

What is synthetic stone veneer?

Also known as faux stone, manufactured stone veneer is a manmade material designed to replicate the look of natural stone in a variety of architectural applications ranging from exterior façades to unique statement walls.

Does GenStone look real?

Faux stone veneer is designed from natural stone to give it an authentic look and feel, and is pre-engineered to make installation easy. In fact, this is where GenStone truly excels and our designers can help you find an affordable solution to decorating your home or office.

What is quartz veneer?

Most stone veneer made from Quartz, including products like our White and Charcoal Rock Panels, is actually made from a derivative of quartz called Quartzite. This is made through heating and pressure of quartz sandstone, resulting in a hard durable rock.

Should stone veneer be sealed?

If you don't seal your Custom Stone Veneer you risk it becoming saturated and could break, crack, or lose color. Also, sealing your stone will help protect the Stone Veneer from mud and dirt stains. However, if your custom stone is on the interior of your home it's not mandatory, but it is recommended.