Which engine oil is best in summer?

As a general rule, you'll get the best protection in the summer when you use a slightly thicker grade of oil, such as a 10W30 instead of a 5W30. Engines need a thicker oil in the summer months because of the summer heat and its effects on thinning the oil out.

Is 5w30 or 10W30 better for summer?

Answer: There is absolutely no need to switch to 10W-30 motor oil in the summer if 5W-30 is an acceptable grade for your engine. While some car manufacturers still advocate the use of 10W-30 (or even 10W-40) as an appropriate engine oil option for summer use, it is completely unnecessary.

Is 5w30 okay for summer?

5w30 is a great multigrade oil for use in low starting temperatures as well as high summer temperatures. It is also more fuel efficient since it creates less drag on the bearings and moving engine parts.

Which engine oil is best for high temperatures?

Mobil 1 advanced synthetic motor oil provides outstanding high-temperature performance and is proven to protect at engine temperatures up to 500 degrees Fahrenheit.

Is 10W40 good for hot weather?

10W30 and 10W40 engine oils are very similar. While both are low-temperature grade oils, 10W40 is thicker at high temperature; therefore, better to use in warm weather.

The importance of choosing the right engine oil quality and viscosity for your car or truck - VOTD

Is 5w40 good for hot weather?

5w40 is better for starting your engine at low temperatures as it flows more easily at these temperatures. When the engine is running and hot, 5w40 and 10w40 have high viscosities and are equally effective in protecting against engine wear.

Which is better 10W30 or 10W40?

10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

Is 20W50 good for hot weather?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Is 5w30 or 10w40 better for summer?

Generally, you'll get the best protection in the summer when you use a thicker grade of oil, such as a 10W30 instead of a 5W30.

Which is better 5w30 or 5W40?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

Should I use different oil in summer?

Even though there's no need to swap oil grades in the summer, you should still invest in regular oil changes. Fresh, clean oil optimizes your vehicle's performance by properly lubricating engine parts and keeping the engine healthy—no matter the season.

Is 10W30 good for hot weather?

A 30 grade oil, thick enough to protect in the heat, was recommended for summer use. Then, multi-grade oils were formulated. A 10W-30 had the winter cold start flow properties of a 10W and the summer, high-temperature thickness of a 30 grade.

Is 10W30 better for high mileage?

10W-30 motor oil makes for a decent high-mileage oil. It gives a better fuel economy while reducing the oil consumption for older engines. Older engines with more than 75,000 miles on them require a thicker oil that will properly lubricate their critical engine parts and prevent oil leaks, sludge, and deposits.

Is it OK to use 10w40 instead of 5w30?

Your vehicle does not use 5W-30 oil. The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

What happens if I use 5W 30 instead of 10W 40?

Can You Mix Car Oil 5w30 And 10w40? The oil that performs better in the cold than 10w40 is 5w30, but less good cold than 10w40, and that has a viscosity that is higher than 5w30 but lower than 10w40. The engine will not be improved by mixing different oils.

Which is better 10w40 or 20w50?

The 20th viscosity grade (i.e 20w50) is specifically designed for high temperatures situations, while the 40th viscosity grade (i.e 10w40) is specifically designed for cold-temperature situations.

Which is better 10w30 or 20w50?

It really comes down to personal preference. As your engine does put out significant horsepower, we would lean toward using 20W-50. If your engine sees very light duty or is built exceptionally tight, 10W-30 would be fine. But again, if you twisted our arm, we would give 20W-50 the nod for the thicker viscosity.

Which is better 20W40 or 20w50?

20W40 is suitable for hotter climates and will not cause sludge as opposed to 20w50 which is more appropriate for hotter conditions.

What is 10W40 oil used for?

This oil weight is commonly used in diesel engines or in a smaller motorcycle engine too. The 10W-40 oil viscosity also often serves as an alternative for older engines with burning or oil leaking issues. Why is that? The 10W-40 engine oil has a thicker viscosity than, say, 10W-30 oil when the car engine is hot.

Which is better 10W40 or 10W50?

At 100ºC, the 10W50 has a viscosity of 18.1cS, the 10W40 is at 13.1cS. What this means is, at low temperature, they perform similarly, but at operating temperature, the 10W50 has better protection (higher film strength) than the 10W40.

Is 10W40 fully synthetic?

Semi-synthetic oils such as 10W40 have long been the standard. Their base is refined crude oil, which is then blended with additives. However the market is moving towards synthetic oils.

When should I use 10W-30?

Lubrication. 5w30 provides better lubrication compared to 10w30. It is best suited for private vehicles and light-duty diesel and petrol engines, while 10w30 is more suitable for commercial vehicles and other cars with heavy load engines.

What cars use 10W-30 oil?

In addition to high-performance turbocharged, supercharged, multi-valve fuel injected engines found in passenger cars, SUVs, light vans, and light trucks, Mobil 1 10W-30 is recommended by ExxonMobil for all types of modern gasoline-powered vehicles.

When should I use 10W30 oil?

Suitable Vehicle Types. 5W-30 multi grade oil is ideal for private vehicles and light-duty petrol and diesel engines. It also provides a better cold temperature start than 10W-30 oil. On the other hand, the slightly thicker oil,10W-30, provides better lubrication for commercial vehicles and heavy-load engine cars.

What temperature is 15W40 good for?

“Diesel has the widest performance range with 5W40,” says Mark Betner of Citgo. “Its starting temperature range is down to minus 22 F (compared with 15-plus with 15W40) up to 122 degrees F (same as 15W40).