Where do flags go on Invisible Fence?

The flags should be placed just inside of your boundary zone, where the beep happens. To place your flags: Take the collar receiver and walk out to where your boundary wire is located. Hold the collar receiver at the height of your dog's neck.

How far apart do you place flags for Invisible Fence?

You'll need to flag the entire fence line by setting a flag every 6 to 10 feet, including places within the area but not open yard space like flower beds and pools.

Where should I put the Invisible Fence transmitter?

If your transmitter is mounted indoors, the wire needs to be ran outside. If there is an existing opening there, you can just use it to run the dog fence wire outside. You can also run the wire under a garage door, or through a window. Avoid running the wire through a dryer duct.

Does an Invisible Fence have to make a complete loop?

The answer is no, an electric fence DOES NOT have to make a complete loop. However, there are advantages and disadvantages to completing the fence loop. Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions.

How do I keep my dog from running through the Invisible Fence?

In-Ground Dog Fence Flags

Will my neighbors Invisible Fence interfere with mine?

Q: Will my neighbors' invisible fence interfere with mine? Neighboring invisible fences can interfere with each other. Two wires that run too closely together can cancel each other's signal, effectively allowing your dogs to travel back and forth between yards.

Can you use a bark collar and an Invisible Fence collar?

We do not recommend the use of any ultrasonic bark control product in conjunction with invisible fences (especially not shock fences). Doing so will confuse the dog and cause a lot of frustration for both you and your pup.

Can Invisible Fence interfere with WiFi?

However, if you use an invisible boundary to cover your entire yard and your home WiFi is on the other side of the house, then you might experience some issues because the dog fence signal can interfere with WiFi.

What color flags are best for dog training?

I suggest you use blue or red. You will be placing the flags about 3 feet apart in the area you want to create the boundary, so be sure to purchase enough flags plus several extra for when something destroys the flag, like storms.

How does Invisible Fence work across driveway?

How does Invisible Fence's underground dog fence work? First, a wire is installed around the perimeter of your property, establishing your pet's Invisible Boundary® perimeter. A transmitter, usually placed in your basement or garage, sends a radio signal along the wire.

Does Invisible Fence hurt dogs?

Hidden fences are safe for all dogs and cats, and they won't hurt your pet. The correction a dog receives from a dog fence or other “shock collar” is actually not a shock at all. Unlike the shock you feel when you touch a physical electric fence, the correction from a dog collar is generated by a battery.

How do I adjust the strength on my Invisible Fence collar?

A light on the receiver will flash. Push the button again within five seconds of the first push and the light will flash from one to five times. That will tell you the current correction level. Push it again within five seconds and the correction level will change.

How do I find the invisible wire in my fence?

How long can a dog wear an Invisible Fence collar?

You shouldn't leave your dog's collar on more than 12 hours a day. Leaving the collar on for too long can cause a condition called Pressure Necrosis, which you can read about here.

Do vets recommend bark collars?

Anti-bark collars are punishment devices and are not recommended as a first choice for dealing with a barking problem. This is especially true for barking that's motivated by fear, anxiety or compulsion.

Is it cruel to use a bark collar?

Bark collars are cruel in that they inflict discomfort and/or pain as a method of stopping barking. There are better and more humane ways to deal with barking that don't hurt your dog and also will address the root of the problem. Bark collars do not address the reason for the barking.

Where should a pressure transmitter be installed?

The DP transmitter must be mounted vertically above the pipe taps so that all potential liquid or condensation in the line will drain back into the pipe. Second is liquids. The DP will be mounted vertically below the pipe so that the line will always stay full with liquid. The third is condensing liquids such as steam.

Why is it important that the transmitter has been correctly installed at the correct location?

To protect against potential damage or malfunction caused by vibration, transmitters should be placed in a location that will be unaffected by vibration when a process is in operation.

What does blinking green light mean on Invisible Fence?

The status light will double flash green every 30 seconds during the 24-hour period after the dog has entered the boundary area. This feature monitors the voltage level of the battery.

How deep do you bury an invisible dog fence?

The main reasons for burying dog fence wire are aesthetics, protection, and trip hazard. If you are planning on burying the wire we recommend a depth between 3″ and 24″ – burying the wire too deep may begin to alter the signal strength and risks running into other buried lines on utilities in your yard.

Are Invisible Fences cruel?

They are particularly unsuitable for dogs with high prey drive, dogs with any aggression issues towards strangers or other animals, and anxious or fearful dogs – but any dog can develop problems. So be aware.