When should you not stain a deck?

You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.

What temperature should you not stain a deck?

Avoid the Heat

If it's too hot, the stain may dry too quickly, potentially causing lap marks and uneven penetration. Avoid staining your deck if it's above 90 degrees Fahrenheit. To ensure this, either choose a cooler day or stain your deck in the morning before it gets too hot.

What is the best time to stain a deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

Is it OK not to stain a deck?

Staining a deck will lead to less work in the future. One of the main reasons the professionals don't recommend staining wood decks is because of the amount of time and energy involved. Stains don't generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

Is it ever too late to stain a deck?

Is It Too Late to Restore Your Deck? If it's been much longer than the recommended three years since you last stained your deck, you might wonder if it's even worth getting back on track. Fortunately, unless your deck is in a total state of disrepair, it's virtually never too late to provide it with a fresh coating.

When to Seal or Stain a New Wood Deck

How long will a deck last if you don't stain it?

After 6 months, the wood will start to lose its color and will begin to fade. Ultimately it will fade to grey or silver.

How long after pressure washing can I stain my deck?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

What temperature should it be to stain a deck?

The ideal temperature range for application is between 50 and 80 degrees. And, it is important to choose a day when no rain is expected for 24 hours.

Can you just seal a deck and not stain it?

A: It's really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

Why can't you stain a fresh deck?

New wood is suggested to dry since it has a high moisture content. This reduces the stain's ability to penetrate. The wood will dry and turn gray from the exposure to the sun's ultraviolet rays. After 3-12 months you would need to apply a wood deck cleaner to remove the gray wood cells.

Is it better to brush or roll stain on a deck?

The first and most obvious reason to roll on deck stain as opposed to brushing it on is that the former allows you to cover a much larger surface area in less time. Rollers are wider, more efficient, and easier to operate. Additionally, using a roller helps you achieve a smoother finish.

Is it good to pressure wash deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

What weather conditions can you stain a deck?

Apply stain to dry wood when it hasn't rained for several days and the forecast calls for at least two days of dry weather between 50° F and 90° F. Low to average humidity promotes faster drying. Staining in direct sunlight can also be a problem. The stain will dry too fast before the wood is able to absorb it.

Is it better to stain a deck in the morning or evening?

Don't apply your deck stain in the direct sun; choose morning or evening hours, or a time of day when your deck has shade. Morning application can be a safer choice to help avoid any contact with dew that sets in overnight. Don't apply more stain than the wood can absorb.

Can I stain my deck in 40 degree weather?

If the temperature is not surpassing 50 degrees, it may be too cold for deck staining. Unlike the heat, the cold will delay the stain from drying completely, which can mess up the curing process and adhesion of the stain.

How long should you not walk on a deck after staining?

In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I'd recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

Should you stain a pressure treated deck?

Staining pressure-treated lumber prevents cracks and splits caused by seasonal changes, prolongs its life, and preserves its natural beauty. Enhance the appearance of your deck, fence, picnic table, or other exterior wood structure by adding fade-resistant color for a finished look you'll enjoy for years.

How can I protect my deck without staining it?

The best preventative measure you can take to protect your wooden deck is to use wood sealant. Clear wood sealants are a great way to maintain the natural beauty and wood grain while still preventing damage from rot, mold, and other weathering.

Can you stain an old deck without sanding?

You don't even have to sand unless you want or if it could really use one. The reason you want to clean the wood first is to remove any dirt, mold or mildew spores to make sure the stain has a clean surface to bond.

How can I tell if my deck is dry enough to stain?

Another way of checking if your wood is ready for stain is to pour a little water on the wood. If the water beads up, the lumber still too wet to be stained or painted. If the water is absorbed into the wood easily, it's ready to be sealed or stained.

How much stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

What if it rains 3 hours after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

How many dry days do you need to stain a deck?

Most oil-based stains must dry for at least 12 hours before they are exposed to any moisture/rain; however, Ready Seal, if properly applied to prepped and dried wood, can get wet within a couple of hours, and it won't wash away. Oil-based stains will generally take 24-72 hours to fully cure.

Can I stain my deck 24 hours after rain?

Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.