When should a pool pump run?

On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer. Note that you need to run your pool pump longer during summer because algae grow more in warm temperatures.

Should you run your pool pump at night or day?

It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.

Why is it better to run the pool pump at night?

If you add chemicals to the water during the day, the sun's UV rays will burn the chemicals and reduce their effectiveness. So you should add chemicals to the water and turn on the pool pump at night. What is this? This will also ensure that the water is well circulated and the chemicals are fully mixed in the water.

How many hours a day should a pool filter run?

The rule of thumb is generally 8 hours, although it could be anywhere from 6-12 hours, depending on your pool's size. Each pool is unique, so to keep your pool pump efficient and effective, you need to figure out exactly what your pool's turnover rate is.

Do I need to run pool pump all the time?

Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.

How Long Should You Run Your POOL PUMP? | Swim University

Should I turn off pool pump when raining?

If your pool pump manufacturer has declared your pump is rain safe, you can leave it on in rainfall. Nevertheless, during a thunderstorm, it is highly recommended that you switch off and unplug your pool pump to prevent any costly and irreversible damages to your pool equipment.

Does a pool pump use a lot of electricity?

Outside of the air conditioner, the pool pump is the largest electricity consumer in the average pool-containing home. According to the study, at the national average of 11.8 cents per KWh, a pool pump alone can add as much as $300 a year to an electric bill.

How many hours should pool pump run in summer?

So how long should the average pool pump run during the summer? To make this process simple, it easier for homeowners to follow this basic guideline: for every 10 degrees of outdoor temperature run your pump for one hour. So if the average temperature is 60 degrees, run your pump for 6 hours.

How many hours a day should you run your pool pump in the winter?

Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.

How often should my pool filter run?

You should run your pool pump and filter at least once a day to ensure you get proper filtration. Whether you have an inground pool, permanent above ground pool or portable above ground pool like an Intex, Summer Waves or Best Way pool, you'll want to run your pump daily and on average for 8 hours.

Can you swim with pool pump on?

Many of the INTEX pump/filters are NOT UL rated and you should not swim with them plugged in. They do have one or two that are UL rated and can be left on while swimming. Just about all other pool equipment brands can be used while you are in the pool when properly installed.

When should I turn my pool pump off?

Run Your Pool Pump For Non-Consecutive Hours

Again, refer to those non-peak utility hours. Working around those, you can run your pump for two hours here, seven hours there, and then three hours there. As long as it runs for at least 8 hours in every 24-hour period, you're covered.

When should I run my pool pump on high?

Here is a simple rule of thumb for pools with single speed pumps during the swim season when the temperatures and swimmer volume are both high: Run the circulation system one (1) hour for every 10°F of air temperature. Example: If it is 100°F, the pump should run 10 hours a day minimum.

How often should you backwash an inground pool?

As a general rule, you should be backwashing your pool about once a week or in conjugation with your scheduled maintenance. Another industry standard is to backwash when your filter's pressure gauge reads 8-10 PSI (pounds per square inch) over the starting level or “clean” pressure.

Does a pool pump need to run 24 7?

A pump does not need to run 24/7 to keep your pool water pristine. If properly sized, a pump should spin through your water in a fraction of the time, allowing it to be dormant for the rest of the day. Thereby, relieving your wallet of the heavy burden of high electric bills.

Should I run my pool pump at night in winter?

Outside temperature will affect how long you run your pump. At temps above 65 degrees you need longer daily operation. And, at temps below 35 degrees run the pump for 24 hours to prevent freezing.

At what temp will pool pump freeze?

If you have an above ground pool with the pool filter system and plumbing above ground (like nearly all above ground pools), pipes and pumps can freeze up in less than an hour of minus 32 degrees. The same is true for inground pool equipment that is not running when temperatures are below freezing.

Will running pool pump prevent freezing?

Helpful tips to keep your pool and its equipment safe during freezing temperatures. Run your pool pump continuously when temperatures are near or below freezing. You don't need to run your heater, moving water likely will not freeze. Disconnect any aerators and lines to slides.

How long should pump run after shocking pool?

A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.

How long should you wait to swim after adding chlorine?

Liquid chlorine — In general, it's a good idea to wait at least four hours after putting liquid chlorine in the pool. The size of your pool and the amount of chlorine added does play a factor in this, too. Once your levels reach 5 ppm or lower, you're ready to swim.

What causes a cloudy pool water?

There are three main causes for cloudy pool water: poor filtration, chemical imbalances, or environmental factors like nearby construction, trees, or wildlife. Filter and pump problems can be caused by a range of issues. If the system is run for just a few hours each day, it may not be able to clean the entire pool.

How can I lower my pool pump energy bill?

How much does it cost to run a pool pump per month?

Let's use 6 hours per day for a 30 day billing cycle which equals 180 hours. 180 hours times 1.679 kilowatts = 302.22 KWH. Assume your electric utility charges $0.14 per KWH. You simply multiply your total kilowatt hours 302.22 X the rate of $0.14 to discover you will pay $42.31 for the month to run your pump motor.