When a car with bright lights comes towards you at night you should?

If an approaching car is using its high-beams, don't look directly into the oncoming headlights—look toward the right edge of your lane. Watch the oncoming car out of the corner of your eye. Do not try retaliating against the other driver by keeping your high-beam lights on. If you do, both of you may be blinded.

When oncoming vehicle headlights are too bright you should?

1. Don't look directly at the lights producing glare. When faced with an oncoming high beam, look down toward the right side of the road to avoid the glare. However, do not completely take your eyes off the road.

What does it mean if someone flashes their bright lights at you while you drive at night?

Flashing can indicate the intention to overtake or pass another driver, or to signal a driver who has just overtaken that he or she can now return to the original lane. Flashing can request or insist that a leading driver speed up or change lanes to get out of the way of a faster following driver.

What does it mean if an oncoming driver flashes headlights at you during a period of low visibility?

What does it mean If an oncoming driver flashes headlights at you during a period of low visibility? -Your vehicle was difficult to see.

What does it mean when someone flashes you?

1. verb, slang To expose one's nudity indecently.

Which Car lights to use at night

How do you deal with oncoming headlights?

When oncoming vehicles shine light directly into your eyes, turn your gaze to the white line on the right side of the road, or to where the pavement meets the shoulder, until the vehicle goes by. All cars have day/night interior mirrors to reduce glare from cars directly behind you.

When driving at night with other traffic you should look directly at oncoming headlights instead?

Don't look directly at oncoming headlights. Instead, watch the right edge of your lane. Look quickly to be sure of the other vehicle's position every few seconds. Drive as far to the right as you can if a vehicle with one light comes toward you.

When driving at night How can you reduce the glare from the headlights of oncoming vehicles?

Use high beams when possible and switch to low beams when following another vehicle or encountering oncoming vehicles. High beams let you see about 350-500 feet ahead but can also blind oncoming drivers. A rule of thumb is to dim lights when you are within 500 feet of oncoming traffic.

Where should you look to reduce the effects of headlight glare at night?

Avoid looking directly at the headlights of oncoming traffic. Instead, look down and to the right. You should be able to gaze at the white line on the side of the road or where the pavement meets the shoulder. Use the right side of the road for tracking your lane instead of the left side.

How can we prevent light reflection while driving?

Check the alignment of your side mirrors.

Then, lean to the other side until your head is in the center of the car. Adjust your other mirror until you can see the rear corner on the other side of your car. Having your side mirrors properly aligned helps reduce glare while driving at night, as well as blind spots.

How do you stop halos at night?

When approaching another vehicle from the rear at night you must dim your high beams headlights when you are within?

Use your low beams when you come within 500 feet (about one block) of an oncoming vehicle. Also use your low beams when following another vehicle within 300 feet.

When you are approached by an emergency vehicle using its sirens and or flashing lights you must?

You must yield the right-of-way to a police car, fire engine, ambulance, or other emergency vehicle that uses a siren and flashing lights. Pull as close to the right of the road as possible and stop until the emergency vehicle(s) has passed.

What can happen if you accidentally look into oncoming high beam headlights?

Violating rules of the road by improper use of high beams, the driver risks causing an accident, since blinding by headlights leads to disorientation, erratic behavior, and delayed response of other road users, whether they are drivers or pedestrians.

How do I stop being blinded by high beams?

To avoid or reduce the risk of getting blinded by high beam headlights at night, you should glance toward the right side of your lane or the right road edge. On most roadways, you be able to see the painted lane line or edge line and stay on course until the source of glare is gone.

How do you avoid being blinded by oncoming cars at night?

High beams blind other drivers and increase the likelihood of a crash. To avoid being blinded do not look directly at oncoming headlights. Instead look to the right edge of your lane and watch the oncoming car out of the corner of your eye. A couple of other brief points, never drive with just your parking lights on.

When following a vehicle at night you should?

When following another vehicle, keep your low-beams on to avoid blinding the driver ahead of you. If you have car trouble at night, pull off the road as far as possible and turn on your hazard lights. Use your high-beam lights when driving in rural areas and on open highways away from urban and metropolitan areas.

When approaching stopped emergency vehicles displaying flashing lights you must?

When approaching a stopped responding emergency vehicle. If you're driving and see an emergency vehicle stopped ahead with its lights flashing, you must slow down to 60km/h (or slower if the speed limit is lower).

When an emergency vehicle is approaching and you are in the middle of an intersection you should?

What should a driver do when an emergency service vehicle approaches with flashing blue lights?

When driving behind another vehicle at night you should?

In which of the following situations should you make sure that your high beam headlights are not on?

State laws usually say you must dim your lights when you are within 200-300 feet of the vehicle you are following. Dim your headlights in all situations when there is a risk of blinding other drivers with your high beams.

When should you dim your high beams quizlet?

dim your high beams whenever you come within 500 feet of an oncoming vehicle. use your low beams when following 300 feet or less behind another vehicle. use the low beams in fog or when it is snowing or raining hard. Light from high beams will reflect back, causing glare and making it difficult to see ahead.

What are night halos?

Glare is light that enters your eye and impedes your vision, like when a camera flash goes off. Seeing bright circles or rings around a light source, like headlights, are known as halos. Halos around lights are most noticeable at night or when you're in dim or dark areas.

How do I stop seeing halos around lights?