What type of hazard is hanging cords?

Don't leave cords dangling anywhere where they can be pulled down or cause a tripping hazard. 5. Make sure there is no crimping or pressure on cords, and don't force them into small spaces or behind furniture. Over time this could lead to a breakdown of the cord's insulation.

What is the hazard of hanging wires?

It may cause injury due to electrical shock, fire or electrocution. A plug or electrical cord should not have exposed wiring. Exposed wires present a danger of electric shock or electrocution. Using an open front plug poses the risk of contact with live wires when plugging it to a electrical outlet.

What type of hazard is cables?

Damaged wires and cables can cause electric shocks and present a fire hazard. Any electrical cables, power cords or extension cords that are damaged, or are not functioning properly, should be removed from service immediately.

What type of hazard is frayed cords?

Worn, frayed, or damaged insulation around any wire or other conductor is an electrical hazard because the conductors could be exposed. Contact with an exposed wire could cause a shock. Damaged insulation could cause a short, leading to arcing or a fire.

What type of hazard is loose cables on the floor?

This leads to the person stumbling forward and potentially injuring themselves on a nearby surface or object. One common trip hazard is cables running along floor spaces, but even small objects such as a discarded shoe or curled up edges of mats are enough to catch a person's foot.

Electrical hazards

What is the hazard of trailing wires and cables?

Trailing and reeling cables pose an elevated safety risk (e.g. a damaged trailing cable can lead to earthing faults and workers being exposed to electric shock hazards). They require specific design mitigation measures, which are detailed in the Mines Safety and Inspection Regulations 1995.

What are the 4 types of electrical hazards?

What are Category 1 and 2 hazards?

Hazards are divided into two categories. Those which score high on the scale (and therefore the greatest risk) are called Category 1 hazards. Those that fall lower down the scale and pose a lesser risk are called Category 2 hazards.

What are the types of hazards?

Which is the physical hazards?

There are five main classes of physical hazard namely Explosive, Flammable, Oxidising, Gases under Pressure and Corrosive to metals.

How are cables classified?

Classification based upon voltage rating of the cable

High tension cables: These have a maximum voltage handling capacity of 11 kV. Super tension cables: These have a maximum voltage handling capacity of 33 kV. Extra high tension cables: These have a maximum voltage handling capacity of 66 kV.

What are examples of biological hazards?

What are the types of control hazard?

Is using worn cords an electrical hazard?

Worn cords can expose the wires within, or loosen the connections on the plug end. Extension cords that are not 3-wire type, not designed for hard-usage, or that have been modified are not as durable. These conditions can increase the risk of electric shock.

What type of hazard is low lying electrical wire?

Dangers of these lines include: Energized wet grounds that can result in electrocutions. Sparks that may start fires (forest fires or setting fuel on fire) Energized vehicles trapping people inside.

What are the hazards of cable pulling?

Manual Handling, Falls of persons from heights, Contact with live electrical conductors, Slips trips and falls. Injuries to plant, cable twisting and jamming Blocked access egress routes.

How do you identify types of hazards?

What are the 4 types of chemical hazards?

What is an example of a physical hazard scenario?

Examples of physical hazards include slips, trips, falls, exposure to loud noises, working from heights, vibrations, and unguarded machinery. Every occupation places certain strains on a worker's body. Ergonomic hazards occur as a result of physical factors that can harm the musculoskeletal system.

What is an example of a Category 2 hazard?

Damp and mould, excess cold/heat. Pollutants such as asbestos, biocides, carbon monoxide, lead, radiation, fuel gas, volatile organic carbons. Overcrowding, lack of space, entry by intruders, lighting, noise.

What is Category 1 hazard list?

Category 1 hazards are those where the most serious harm outcome is identified, for example, death, permanent paralysis, permanent loss of consciousness, loss of a limb or serious fractures.

What is Category 2 hazards?

If a hazard is less serious or less urgent, this is known as a Category 2 hazard. If you have concerns about the condition of your home you should contact your landlord, where you are a tenant, or contact the Health and Housing Team at Stafford Borough Council for advice and support.

What are the 7 hazard categories?

What are electrical hazards examples?