What time of year should you stain your deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

When should you not stain a deck?

You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.

Is it better to stain deck in spring or fall?

Fall is the perfect time to take on the task of staining your deck. Not only will you not roast in the sweltering summer temperatures, but the cooler fall weather is ideal for staining. Most deck stains recommend that they be used when outdoor temperatures are above 50 and below 90.

What temperature should it be to stain a deck?

The ideal temperature range for application is between 50 and 80 degrees. And, it is important to choose a day when no rain is expected for 24 hours.

Is it better to stain a deck before or after winter?

Because stain requires a dry deck for a secure application, a week of dry fall weather is ideal for staining your deck than in summer or spring humidity. More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.

When to Seal or Stain a New Wood Deck

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

Is it good to pressure wash deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

Is it better to stain a deck in the morning or evening?

Don't apply your deck stain in the direct sun; choose morning or evening hours, or a time of day when your deck has shade. Morning application can be a safer choice to help avoid any contact with dew that sets in overnight. Don't apply more stain than the wood can absorb.

What if it rains after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

How many gallons of stain do I need for a 20x20 deck?

To stain a 20x20 ft² deck area, you'll need approximately 2 and 1 quarter gallons (2.25 gal). You can get this result by assuming that 1 gallon can cover up to 175 ft². Also, consider this amount is for one coat of stain.

How long should you not rain after staining a deck?

First, ensure the deck is completely dry. Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

Which deck stain lasts longest?

In general, an oil-based deck stain will last the longest, but it also depends on the type of wood, the weather conditions, and how long the deck has gone unprotected before staining.

How long does a deck need to dry after staining?

Depending on temperature and humidity, allow 24-48 hours of dry time before using your beautifully restored deck or porch.

Can you stain a deck in any temperature?

Most stains can be applied from about 50° F to 90° F — but many people don't realize this range refers to the temperature of the wood surface, not the air. A day that's 70°F and sunny can push deck surface temperatures above 90°F leading to application challenges and shortened open times.

Can you pressure wash and stain a deck in the same day?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

Is it too late to stain my deck?

Is It Too Late to Restore Your Deck? If it's been much longer than the recommended three years since you last stained your deck, you might wonder if it's even worth getting back on track. Fortunately, unless your deck is in a total state of disrepair, it's virtually never too late to provide it with a fresh coating.

What happens if you dont wash your deck before staining it?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

What if it rains 3 hours after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

Do you use a brush or roller to stain a deck?

You should use a roller brush or sprayer to apply a steady coat of quality stain, such as Olympic Elite stains or Olympic MAXIMUM stains. If you see that too much wood stain has been used in an area, use a roller or brush to fix the imperfections.

How long should you wait to stain a deck after power washing?

A basic rule of thumb for DIY deck builders, homeowners, and professional contractors is that roughly 48 hours is an adequate drying time for a newly washed deck.

Can you just seal a deck and not stain it?

A: It's really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added.

Can I stain over old stain?

Can I stain on top of old stain? Yes! In fact, applying stain over stain is a fairly simple process. It works especially well if you're applying a dark stain over a lighter stain.

Do you seal a deck after staining?

To protect your deck from both moisture and sun damage, you need to first stain it, then follow that with a clear sealant. You can now find modern products that combine stain and sealant to make complete deck protection a one-step application process, after the necessary prep work.

How long should you let pressure treated wood dry before staining?

Allow the wood to dry 24 hours before applying stain.