What time of year should you stain a deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

When should you not stain a deck?

You want to apply the stain when the wood surface and air are in the temperature range of 50° – 90°F. You also want to avoid the direct application of sunlight. Lastly, do not apply a stain if there is a forecast of rain in the following one to two days, or all your hard work could end up being washed away.

Is it better to stain deck in fall or spring?

Fall is the perfect time to take on the task of staining your deck. Not only will you not roast in the sweltering summer temperatures, but the cooler fall weather is ideal for staining. Most deck stains recommend that they be used when outdoor temperatures are above 50 and below 90.

What is the best temperature to stain a deck?

The ideal temperature range for application is between 50 and 80 degrees. And, it is important to choose a day when no rain is expected for 24 hours.

Is it better to stain a deck before or after winter?

Because stain requires a dry deck for a secure application, a week of dry fall weather is ideal for staining your deck than in summer or spring humidity. More specifically, the moderate temperatures of early fall are optimal for staining, as the later fall weeks may bring colder days that are too chilly for your stain.

When to Seal or Stain a New Wood Deck

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

Is it good to pressure wash deck before staining?

Taking your time is key to power washing a deck successfully. Now that the wood has been cleaned and stripped of grime, you can sand it and apply your stain of choice. Power washing a deck before staining will allow the wood to absorb the stain better and deeper.

What if it rains after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

How long should a deck sit before staining?

Generally, all new decks should dry out for at least 30 days before stain or paint is applied. Although a finish can be applied immediately after construction, more work is involved, so it's best to let the wood fully dry before finishing.

How long does it take deck stain to cure?

Depending on temperature and humidity, allow 24-48 hours of dry time before using your beautifully restored deck or porch.

How long should you not walk on a deck after staining?

In most cases a full body stain or acrylic deck finish will be dry to touch within an hour in dry, hot weather. After two hours you could take a chance and walk on it with shoes, though I'd recommend barefoot. After about 4 hours you should be able to safely walk on your deck.

Can you wash and stain a deck in the same day?

You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

Which deck stain lasts longest?

In general, an oil-based deck stain will last the longest, but it also depends on the type of wood, the weather conditions, and how long the deck has gone unprotected before staining.

Do I need to remove old stain before re staining a deck?

Generally speaking, it's a good idea to completely remove all traces of the previous coat of deck stain before applying a new one. The reasons for this may be fairly obvious -- a previous coat of stain might be peeling away from the surface in several areas.

How often does a wood deck need to be stained?

As a general rule, your deck should be stained every 2-3 years. This can change, however, if you are in an area of high-humidity or especially volatile weather. The signs to look for when determining if you need deck staining are: The stain color of the wood is wearing off.

Can you stain a deck in any temperature?

Most stains can be applied from about 50° F to 90° F — but many people don't realize this range refers to the temperature of the wood surface, not the air. A day that's 70°F and sunny can push deck surface temperatures above 90°F leading to application challenges and shortened open times.

What if it rains 3 hours after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

What happens if you dont wash your deck before staining it?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

How long should you let pressure treated wood dry before staining?

Allow the wood to dry 24 hours before applying stain.

How many hours does stain need to dry before rain?

Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

Is it too late to stain my deck?

Is It Too Late to Restore Your Deck? If it's been much longer than the recommended three years since you last stained your deck, you might wonder if it's even worth getting back on track. Fortunately, unless your deck is in a total state of disrepair, it's virtually never too late to provide it with a fresh coating.

Can you apply deck stain with a roller?

Rollers are a great way to apply wood stain as well for the speed at which you can apply the stain. However, when using rollers can be a disadvantage when you have hard to reach areas. If you are going to use a roller to apply your stain, make sure to have a brush as well for those hard to reach areas.

How long should you wait to stain a deck after power washing?

A basic rule of thumb for DIY deck builders, homeowners, and professional contractors is that roughly 48 hours is an adequate drying time for a newly washed deck.

What is the most efficient way to stain a deck?

Apply Thin Coats. If you're using several gallons of stain for your project, first mix them together to be sure the color is consistent. Then use long, smooth strokes to stain two or three boards at once. Apply solid stains in thin coats and semitransparent stains or clear sealers in even thinner coats.