What temperature is too low to stain a deck?

Avoid the Cold

If you're staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren't in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.

What happens if you apply stain when it's too cold?

Temperature and humidity can have major effects on how your stain dries. If it's too wet or cold, the drying time for stains can easily double. In extreme cases, the product will just stay wet until the humidity decreases or the temperature rises.

Is 40 degrees too cold to stain wood?

“Staining wood usually works between 50 and 90 degrees Fahrenheit,” says Phillip Ash, the founder of Pro Paint Corner, “but the best temperature would be at around 70 degrees Fahrenheit.” Some brands or types of stains may work outside that range, but it's the generally accepted best temperature for staining wood.

Can you stain in 35 degree weather?

Unlike most stains, FLOOD Pro Series Solid Color stain can be applied down to 35°F, so you can apply earlier and later in the staining season. FLOOD Pro Series Acrylic/Oil Semi-Transparent stain can also be applied down to 35°F.

Can you stain a deck in 55 degree weather?

Temperature. The ideal temperature range for application is between 50 and 80 degrees. And, it is important to choose a day when no rain is expected for 24 hours.

Ideal Conditions to Stain Your Deck

What happens if you stain deck too early?

If you stain pressure-treated wood too soon, the stain will be unable to fully penetrate the wood, and you will not get the protective benefits of the stain. What is the best stain for pressure-treated wood? An oil-based stain is the best for pressure-treated wood.

How long can a deck sit before staining?

Let the New Deck Dry and Weather for 3-12 Months:

The most common suggestion by the manufacturer. New wood is suggested to dry since it has a high moisture content. This reduces the stain's ability to penetrate. The wood will dry and turn gray from the exposure to the sun's ultraviolet rays.

Can you stain a deck in 40 degree weather?

Avoid the Cold

If you're staining your deck in the spring or fall, wait for a day with highs above 50 degrees Fahrenheit. Also, make sure freezing temperatures aren't in the forecast for that night. If it drops below 32 degrees Fahrenheit before the stain has thoroughly dried, it can hinder the curing process.

What time of year should you stain a deck?

Because you want to wait for days that aren't excessively hot or humid, the best times to apply deck stains are in the late spring and early fall, when the weather is moderately warm and dry. Check the weather and find a time when it's not expected to rain for two days before and following the deck treatment.

How many coats of stain should you put on a deck?

We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much as the wood can absorb.

What if it rains after I stain my deck?

If it rains within 48 hours of applying a treatment, the water will soak into the wood, and try and displace the stain. This can cause a blotchy, flaky look, rather than a smooth, even, coat. If it rains immediately after you've stained the wood, the stain will peel and flake off.

Does wood stain dry faster in heat or cold?

For the best results, refer to the instructions on the stain's container. Some stains are ready for another coat in as little as 1-3 hours, while others require 72 hours. Does stain dry faster in heat or cold? Wood stain dries faster in warmer, mild conditions with lower humidity levels.

What weather is best to stain a deck?

Apply stain to dry wood when it hasn't rained for several days and the forecast calls for at least two days of dry weather between 50° F and 90° F. Low to average humidity promotes faster drying. Staining in direct sunlight can also be a problem. The stain will dry too fast before the wood is able to absorb it.

How warm does it need to be to stain a deck?

As a rule of thumb, with older decks make sure the temperature is over 50 degrees, sunny, but not hotter than around 80 degrees. Additionally, if the deck is VERY old and the wood is cracked or falling apart - instead of staining you should use a deck resurfacer.

What is too cold wood stain?

If the temperature is not surpassing 50 degrees, it may be too cold for deck staining. Unlike the heat, the cold will delay the stain from drying completely, which can mess up the curing process and adhesion of the stain.

Is it too late to stain my deck?

Is It Too Late to Restore Your Deck? If it's been much longer than the recommended three years since you last stained your deck, you might wonder if it's even worth getting back on track. Fortunately, unless your deck is in a total state of disrepair, it's virtually never too late to provide it with a fresh coating.

Is it better to brush or roll stain on a deck?

The first and most obvious reason to roll on deck stain as opposed to brushing it on is that the former allows you to cover a much larger surface area in less time. Rollers are wider, more efficient, and easier to operate. Additionally, using a roller helps you achieve a smoother finish.

Is it better to stain a deck wet or dry?

Puddles of detergent can damage and discolour the wood. Let the deck dry for at least 48-72 hours before staining. Staining a wet deck will result in an uneven finish. Try to stain your decking on a dry, warm day.

Is it OK to stain a deck every year?

Stains don't generally last more than a year. This means yearly cleaning, staining and, if necessary, sanding of your deck every year.

Can I stain my deck 24 hours after rain?

Remember, no rain 24 hours before you apply stain and no rain 24 hours after the staining project. Assuming the deck is dry and thirsty for stain, it's time to make your deck amazing. When applying stain, a pad, brush, roller, or rag can be used to apply the stain.

Can you apply Thompson's Water Seal in cold weather?

Don't seal a deck below 50 degrees.

You don't want to begin the sealing process until you can safely guarantee the temperature will remain above 50 degrees for at least 48 hours.

Can I apply a second coat of deck stain a week later?

Don't allow the product to dry out between coats. this is especially true with waterborne products. Most stains will have some type of waxes or paraffins in them, which work to help them repel water.

How long after power washing can I stain my deck?

The short answer is 48 hours. You should wait at least two days after pressure washing your deck before you consider staining it, to give time for it to dry.

What happens if you dont wash your deck before staining it?

But don't just slap a coat of stain on in a hurry — you'll need to clean your deck before staining it. If you stain a deck without cleaning and prepping it first, the results will look blotchy, uneven, and, well, amateur. Any time you save skipping the cleaning stage, you'll spend twice over repairing the botched job.

Can you apply a second coat of deck stain after 24 hours?

When applying the second coat of stain on the deck, wait 4 hours between applications. Depending on temperature and humidity, allow 24-48 hours of dry time before using your beautifully restored deck or porch.