What temperature do you add color to soy wax?

Always add the dye when the wax is at its hottest to ensure it fully melts. Around 185° F is the recommended temperature to add them, or if you're using the double boiler method you can add them in with the wax and melt it all together.

What temperature do you add candle dye to soy wax?

Heat wax in a double-boiler system to 160°F - 180°F. Preheat glass containers to 125°F - 149°F to allow for better side adhesion. Add fragrance and dye, stir thoroughly, then pour between 150°F-160°F.

How do you add color to soy wax candles?

Thankfully, adding color to your DIY candles with soy dye is pretty easy: just add a few dye chips or blocks, or powdered dye. Chips and blocks should melt evenly to prevent any streaking. If you don't dissolve your ingredients properly, you'll also end up with lumpy candles or clogged wicks.

What temp should you pour your soy wax?

Pouring Candles - Make sure that the container is at room temperature or slightly warmer. The wax should be poured into the container while it is 120 - 165 F to reduce cracking and speed up the cure time of the wax.

How much pigment do I add to soy wax?

4 to 8 drops per pound of wax is the ideal amount to use. Using more than 10 drops of dye per pound of wax might cause candles to have a chemical smell.

How to Color Soy Candles Using Candle Dye - 3 Ways to DIY Candle Dye

What temperature do you add mica to soy wax?

Allow your wax to cool to 60/70 degrees celsius, add your chosen fragrance oil (liquid dyes and mica should also be added at this point). Stir your chosen fragrance oil into the wax thoroughly for a minimum of 2 mins. Allow the wax to cool to 55/60 degrees celsius and pour slowly into the mould(s) from a low height.

How do you add pigment to wax?

Using a palette knife or butter knife, mix wax with pigment in a small dish until completely combined, (adjust the wax to pigment ratio depending upon the transaprency desired). Apply with a lint-free cloth or soft steel wool, being sure to work the wax into any grooves or pits of the wood.

What happens if you pour soy wax too hot?

When soy wax is exposed to excessive heat, moisture, or has a high oil content it can become soft and clump together.

How long should soy wax cool before pouring?

In pillar and votive candles it may require some experimenting but we suggest waiting only an hour or two before re-pouring. Many times if you wait too long the wax will begin to shrink and pull away from the top of the mold.

How do you color candle wax?

Start by cutting your wax into 1-inch blocks and melting it in your double boiler. Then, add drops of dye until you reach your desired color. Stir the wax for 2 minutes, then pour it into the empty candle mold with the wick in the middle. Let it sit for 1 hour, and you're done!

What dye is best for soy wax?

Dye Blocks are better for darker, vibrant colors in soy (especially red, greens, and blues). They can also be used to easily color large batches of paraffin wax. Liquid Dyes will produce lighter, pastel shades in soy and light to dark shades in paraffin. These are also great for mixing to create custom colors.

What temperature do you add fragrance to soy wax Celsius?

When your wax is melted and is a clear liquid, it is time to add fragrance. If a fragrance is very viscous, the wax may need to be a little hotter than 60 degrees Celsius, as viscosity decreases with increased temperatures. The wax temperature will then cool to about 50 – 55 degrees Celsius ready for pouring.

What temperature do you add fragrance to soy 464?

Allow your wax to reach 185°F, mix in your fragrance, then remove from the heat source. Think of 185ºF as the “Goldilocks Zone.” It's hot enough for the fragrance to fully bind and mix with the wax and cool enough to ensure no fragrance is lost.

What temperature do I add essential oils to soy wax?

Melt the wax until it reaches around 125 degrees F. Remove from heat and add your essential oils. It's going to take quite a bit to make the scent stick, and I learned that it holds scent best when you add EOs once the wax hits 110 degrees F.

How much oil do you add to soy wax?

Rule of Thumb:

As a rule of thumb, you need 1 oz fragrance oil in 1 pound of soy wax. Technically, it is 6.25% of the fragrance load. We have calculated it by dividing 1 oz of scented oil with 16 oz (1 pound of soy wax).

How long should a soy candle cure?

Most people recommend at least 24 to 48 hours for a paraffin-based candle, and up to a week for a soy-based candle. But there are things you can do when you are actually making the candle that will help too: Make sure to add your fragrance oil at the right temperature.

How do you make a strong scent throw in soy candles?

Why is my soy wax candle turning white?

High temperatures change the chemical state of the soy wax, causing variations in the moisture content and texture of the wax as it cools. This state change can lead to "frosting" (white spots) as the wax cools. According to CandleDance.com, the frosting on soy candles is actually a crystal growth of vegetable oils.

Which wax has the best scent throw?

As a general rule, paraffin waxes still provide better scent throw than soy waxes.

Can you use mica powder in soy wax?

Although Micas aren't very susceptible to fading, as they do not migrate or bleed, most crafters advise against using mica powder to color the candles because this mineral powder does not dissolve into the wax. So its fine particles can clog the candle's wick, resulting in a smaller flame.