What size tires can I put on my truck with a 2 inch leveling kit?

So, yes you can fit bigger tires than stock. A good rule of thumb is that if you have a two-inch leveling kit, you can get a tire that is two inches larger and so on. This way you know that it will fit for sure. A lot of times, stock tire sizes are very conservative and you can go bigger than that two inches.
Takedown request   |   View complete answer on customwheeloffset.com


Will a 2-inch leveling kit fit 33 inch tires?

You need a minimum of a 2-inch suspension kit and a small front end leveling kit on the front end to accommodate the width of a 33” tire without scrubbing at full lock or full turn in reverse. If you're running stock rims with 33” tires you can opt for a small wheel spacer to improve the clearance from the UCA.
Takedown request   |   View complete answer on 4wheeldriveguide.com


What size tires can I put on my Silverado with a leveling kit?

What Size Tires Can You Put on Your Truck With A 2-Inch Leveling Kit? Generally speaking, adding a 2-inch leveling kit to your Chevy Silverado 1500 will allow you to have up to 35" tires for the front and rear wheels.
Takedown request   |   View complete answer on vehq.com


Can you get bigger tires with a leveling kit?

Leveling kits are designed to level out the uneven stance and increase the ground clearance of your 4×4. In most cases, the slight lift will allow for bigger tires. When coupled with high-quality aftermarket shocks, a leveling kit can increase on- and off-road handling too.
Takedown request   |   View complete answer on 4wheelparts.com


What size lift do I need to fit 33 tires?

Most IFS vehicles require a minimum of 2.5 to 3-inch lift with additional trimming of fender liners and body mounts to accommodate a 33” tire.
Takedown request   |   View complete answer on 4wheeldriveguide.com


Understanding how to pick out the right size Tires, Rims and wheels



How much of a lift is needed for 35s?

Fitting 35” tires do not require a crazy amount of modifications. It starts with an aftermarket suspension with the minimum lift of 2.5” inches, and 3 inches is recommended for off-road.
Takedown request   |   View complete answer on 4wheeldriveguide.com


What does a 2 inch leveling kit do?

A leveling kit involves hardware to slightly raise the front of the vehicle so it matches the stock height in the back. A leveling kit is usually designed to provide a maximum lift of about 2 inches in the front.
Takedown request   |   View complete answer on motortrend.com


Will a 2 inch leveling kit hurt my truck?

If you go with the two-inch height for your leveling kit and carry a heavy hitch or load in your bed, then you can create sag in the back that could be problematic as well. If you do any hauling or towing, you'll want to have some rake in the rear or have airbags that can keep the back up during operations.
Takedown request   |   View complete answer on greengarageblog.org


Can you level a truck with stock tires?

You'll be good. Of course it would look better with the larger tires but it will be just fine with stockers for a while. Doesn't by any means look bad but there is some wheel well left desired to fill...
Takedown request   |   View complete answer on f150forum.com


Will 33 tires fit stock Silverado?

Generally most newer Chevy Silverado pickups can fit 33 inch tires with just a leveling kit. If you want to fit 35 inch tires a lift is more likely to be required.
Takedown request   |   View complete answer on pschevy.com


How tall is a 285 tire?

The sidewall height or "aspect ratio" of a 285/75/R16 tire is 75% of 285mm. Example: 285/75R16 (285 X 75 / 2540 x 2) + 16 = 32.8 inches tall.
Takedown request   |   View complete answer on tiresize.com


Do you need a lift for 33-inch tires?

You don't "need" a lift, but the tires will rub in some areas, especially when off-road. The front tires will rub the front airdam under the front bumper when turning lock to lock [like in a parking lot]. You can just remove it as it would be removed if you replace the bumper, anyway.
Takedown request   |   View complete answer on wranglerforum.com


What is 285 70R17 in inches?

285/70R17 tires are 32.7″ tall, have a section width of 11.2″, and fit wheels with a diameter of 17. The circumference is 102.7″ that translates into 617 revolutions per mile.
Takedown request   |   View complete answer on tiresdoc.com


Do leveling kits wear ball joints?

KEITH DILLARD: Correct, you'll wear out the outside of your tires, you'll wear out everything. Poor alignments will wear out your ball joints faster, you overload your ball joint one way or the other.
Takedown request   |   View complete answer on motorweek.org


Does leveling kit hurt gas mileage?

Installing a front-end leveling kit equalizes the suspension, which results in increased wind resistance. The increased resistance and drag decreases fuel economy. However, the difference in gas mileage may not be significant.
Takedown request   |   View complete answer on carolinacustomwheels.com


What are the cons of a leveling kit?

Con: Increased wear on suspension

A leveling kit will change the overall design of the vehicle, which will result in increased wear and tear on the suspension system. The good news is that there is a way to avoid these problems with professional installation and routine maintenance.
Takedown request   |   View complete answer on tricktrucks.com


Does a leveling kit lift the rear?

- A leveling kit is designed to lift only the front of your vehicle. - A leveling kit allows you to lift the front of your vehicle to meet the height of the lifted rear end.
Takedown request   |   View complete answer on sdwheel.com


How many inches does a leveling kit raise your truck?

Leveling kits work by raising the front part of a truck so that its height matches the stock height at the back, which translates to more ground clearance. These important kits provide a lift of approximately two inches, thus removing the raked stance that most completely stock trucks have.
Takedown request   |   View complete answer on offroadaussie.com


Can you fit 35s on a 2 inch lift?

Fitting 35-inch tires on a 2” lift is possible on a solid front axle suspension setup like a Jeep Wrangler or Nissan Patrol. You should lengthen your stops but by the same amount as your lift.
Takedown request   |   View complete answer on 4wheeldriveguide.com


What size lift do I need to fit 35 inch tires on Silverado?

Fitting 35” tires to your truck requires a suspension upgrade of 3.5”-6” depending on the vehicle and if it's an IFS or SFA front suspension.
Takedown request   |   View complete answer on 4wheeldriveguide.com
Previous question
Is it good to be a day trader?